1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

So a friend pinged me on FB last night

Discussion in 'Projects' started by mark tomlinson, Oct 28, 2014.

  1. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    well, at least I get a free lunch ;)
     

    Attached Files:

    2 people like this.
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    W/supports removed. Even though Simplify makes this easy, it was still complicated by the fact that there were a lot of them in awkward places.
    Hemostats rule.
     

    Attached Files:

  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    The teeth need clean-up. We should have printed it a bit hotter and with a finer resolution.
     
  4. Printed Solid

    Printed Solid Volunteer Admin
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    1,605
    Likes Received:
    1,003
    nice. I've been debating on running one of those for my kids, well at least for when my kids choose to take a shower in the master bathroom...

    The original model was designed for the jaw to be printed in a different orientation, so I can see how the supports are a little bit of a pain.
     
  5. robert sanchez

    robert sanchez Active Member

    Joined:
    Oct 9, 2014
    Messages:
    320
    Likes Received:
    160
    Please: What was your infill and how many shells? I tried last night but my software bugged out.
     
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    The infill was the only thing I changed. We had that process.fff tweaked to 15% for something we had done previously so I reset it back to 25%.
    Top/bottom layers = 3, shells = 2. Supports were set at 25% infill as well. It would be a bit better at 30% or 40% infill (for the model, not supports) a little hotter print (205 or 210 for me instead of 200) and a bit slower (maybe 25% slower)...
     
  7. robert sanchez

    robert sanchez Active Member

    Joined:
    Oct 9, 2014
    Messages:
    320
    Likes Received:
    160
    Thanks. I appreciate the info.

    t-wrex is running now. Hopefully it will be done when I get home today.
     
  8. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Yea, it was a long print even at the faster settings I did use, but it is a huge model.
     
  9. collin

    collin New Member

    Joined:
    Mar 21, 2014
    Messages:
    313
    Likes Received:
    86
    Hey mark can you send me a copy of your setting used for this print, i have not been able to get simplify 3d to spit out results this good yet.
     
  10. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    PM your email address, the forum is broken and not allowing attachments/uploads at the moment.
    I'll send you my process.FFF
     
    2 people like this.
  11. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,276
    Upload images to imgur an dropbox is a good option for file uploads till it's fixed.
     
    2 people like this.

Share This Page