Show us your best Robo 3d print

My parametric orchid planter printed @ 100 microns in PLA. Sadly I got the dimensions a bit wrong and it's rather too large to be practical The diameter at the top is ~8 inches

 

That's a monstrous print, well done.

 

This has been the largest print I have done to date and has taken the most time, but it was fun and turned out awesome. Still have a few more things to do, run leds and vacuum form a lens. @Steven Stowell printed out the glow in the dark parts for me and also is going to help with leds.

This project is on Thingiverse. http://www.thingiverse.com/thing:158120

 

Hi Everyone,

I just wanted to put up a picture of my biggest print to date - 23 hours after starting I have a made to fit shoulder armor piece for my Renaissance fair outfit, I'm planning on printing a whole set of armor in pieces.

 

Don't think this is my best print, but thought it was unique enough to share. This is a two piece design that simply snaps together to give a sharp edge dual color. I created this in Inkscape, imported into Blender, tweaked the settings and exported to STL. It was a fun project on how to go from 2d drawing to 3d printing.
Go Bobcats.

 

Here i my latest print after my upgrades. It required 0 post processing at all and it works beautifully

 

Printed with cheap shaxon black PLA from Fry's. Not a huge fan of it as the layer lines are pretty visable even though it's very very smooth to the touch. Maybe I am just being way to picky. Prinnted the body, legs, head separately. Snapped together without issue.

 

Printed these parts and did sand casting.

First one is sand casting in Iron.
Second one is sand casting in Aluminium.

 

we still going ?
printer decided to print some replicators in bronzefill
think i finaly masterd bronzefill took about a day still needs a bit of polishing and cleaning its really soft havnt had a single jam with it.

 

Amazing what a stock Robo3D can Produce. No supports, no post processing.



Aria got a big sister last night.


The whole Family, Yellow was done at the robo's absolute build height, 8 7/8", the black was sliced in half and is 10 1/4"

 

That's cute. Here you go.

 

Here's a couple of my best prints!

 

Created a Flat Earth
PLA


Made a smaller one as well

Here's the bigger one


Compare them to the fake Earth shot that we have been shown all the time.

 

i knew the earth was flat

 

My best so far. got the robo on wednesday..took a few days to fix problems on it.
All are ABS prints on BuildTak on the bed and Simplify3d stock settings ( 230 and 80 .2mm layers )

LCD Case ( the buttons and knob are PLA from my modded Replicator 2 )


OSU Beavers ( No warp with abs )

 

LOL. Both of my parents are. I'll let it slide.

 

Hey guys, new here.

I got my R1 for a birthday present and have printing nearly constantly.

While this may not be the best print I ever do, It's my best one to date.

It's a fossil from African Fossils, they are nice enough to publish 3D scans of several of their collection. They seem to print well enough after a run through netfab.

Anyway, here's to the future!

Mike