1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

After changing new pogo adapter .

Discussion in 'Troubleshooting' started by J0ester, Sep 27, 2017.

Page 2 of 2
  1. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    So the cabling back to the bed or the board.
    You really need to get with Robo tier-2 support folks to sort out what needs replacing.
    I'd start to suspect the control board at this point since the wiring looks OK.
     
    #21 mark tomlinson, Sep 28, 2017
  2. J0ester

    J0ester New Member

    Joined:
    Jul 14, 2017
    Messages:
    20
    Likes Received:
    0
    i remove the bed cable connector from the main board and it still show the same msg.
     
    #22 J0ester, Sep 28, 2017
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Which rather narrows it down doesn't it :)

    You need to be calling Robo
     
    #23 mark tomlinson, Sep 28, 2017
  4. J0ester

    J0ester New Member

    Joined:
    Jul 14, 2017
    Messages:
    20
    Likes Received:
    0
    thank alot alr arrange for tier 2 to call back. hope i can finish my print before the dead line
     
    #24 J0ester, Sep 28, 2017
  5. Kris Holland

    Kris Holland New Member

    Joined:
    Aug 9, 2017
    Messages:
    13
    Likes Received:
    4
    I replaced my pogo board, had the same thing. Just got a new motherboard, and replaced it... works now.
     
    #25 Kris Holland, Sep 29, 2017
Page 2 of 2

Share This Page