1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

microSD card holder for re-insertion into C2

Discussion in 'Show and Tell' started by OutsourcedGuru, Feb 10, 2018.

  1. OutsourcedGuru

    OutsourcedGuru Active Member

    Joined:
    Jun 3, 2017
    Messages:
    752
    Likes Received:
    141
    Okay, so it's somewhat easy to pull the microSD card out of a Robo C2 but I've found it to be a pain to try to coax it back in. The spacing is such that you can barely get your hand in there, the angles make it tough to align the card in a horizontal plane, etc.

    This little part then allows you to grab the microSD, align and insert it without too much extra effort. The print job takes a mere six minutes to print and requires no brim/raft/support.

    IMG_0439.png IMG_0441.png
     

    Attached Files:

    #1 OutsourcedGuru, Feb 10, 2018
    jimmy1967 and mheath82 like this.
  2. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    So where is the tool to pull the µSD card out of the rPi?
     
    #2 WheresWaldo, Feb 10, 2018
  3. OutsourcedGuru

    OutsourcedGuru Active Member

    Joined:
    Jun 3, 2017
    Messages:
    752
    Likes Received:
    141
    hands.jpg
     
    #3 OutsourcedGuru, Mar 9, 2018
    jimmy1967 and tkoco like this.
  4. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    If they are articulated I'll take 10!
     
    #4 WheresWaldo, Mar 9, 2018
  5. Stephen LaRochelle

    Stephen LaRochelle New Member

    Joined:
    Mar 1, 2017
    Messages:
    3
    Likes Received:
    2
    Very helpful. Thank you!
     
    #5 Stephen LaRochelle, Apr 16, 2018
  6. tkoco

    tkoco - -.- --- -.-. ---
    Staff Member

    Joined:
    May 7, 2018
    Messages:
    721
    Likes Received:
    273
    Nice to see that you have a good sense of humor :D <Reference image of hands upon hand>
     
    #6 tkoco, Jun 8, 2018

Share This Page