Shoutbox Archive

May 20, 2015 10:52 AM - Stephen Capistron: i need to remember to set the DVR for lettermen tonight
May 20, 2015 10:52 AM - donhuevo: and tomorrow night
May 20, 2015 10:52 AM - donhuevo: or wait
May 20, 2015 10:53 AM - donhuevo: tonight is his last night
May 20, 2015 10:54 AM - Mike Kelly: didn't know he was still on
May 20, 2015 10:55 AM - Stephen Capistron: James Corden is going to have his highest ratings ever tonight
May 20, 2015 10:55 AM - jbigler1986: i don't even remember the last time i watched one of the late night talk shows
May 20, 2015 10:56 AM - Stephen Capistron: i never watch late night
May 20, 2015 10:56 AM - Stephen Capistron: Being on eastern time doesn't help
May 20, 2015 10:57 AM - Mike Glass: Im on northern time and still dont watch it
May 20, 2015 10:57 AM - jbigler1986: so true
May 20, 2015 10:58 AM - jbigler1986: northern time?
May 20, 2015 10:58 AM - jbigler1986: mountain?
May 20, 2015 10:58 AM - Mike Kelly: drives me crazy the random location people posts questions to
May 20, 2015 10:58 AM - Mike Kelly: "Oh I have a question about matter control, I should post it in software"
May 20, 2015 10:58 AM - Mike Kelly: 'NO, *smacks nose* BAD POSTER"
May 20, 2015 10:59 AM - Mike Glass: Was it JB..lol
May 20, 2015 10:59 AM - jbigler1986: ha
May 20, 2015 11:01 AM - Mike Kelly: mostly new posters
May 20, 2015 11:01 AM - jbigler1986: that shit will never be seen on any of my pcs ever again
May 20, 2015 11:02 AM - Mike Glass: until they change it, then you will go ohhhh me love MC..haha
May 20, 2015 11:03 AM - jbigler1986: nope
May 20, 2015 11:04 AM - Mike Kelly: i'm trying it just to get the "new user experience"
May 20, 2015 11:04 AM - Mike Kelly: it's freaking annoying though
May 20, 2015 11:04 AM - Mike Kelly: "Oh you enabled support? Na I don't feel like generating it"
May 20, 2015 11:04 AM - Mike Glass: I liked the old version better
May 20, 2015 11:04 AM - Mike Kelly: the new UI is horrible
May 20, 2015 11:04 AM - Mike Kelly: they keep changing it too, drives me crazy
May 20, 2015 11:04 AM - Mike Kelly: "Oh you printed a part with autolevel? lemme just not enable it for your second print"
May 20, 2015 11:04 AM - Mike Kelly: WTF
May 20, 2015 11:05 AM - Mike Glass: yea, they should of left it alone and added real features
May 20, 2015 11:05 AM - Mike Kelly: Also home all should be G28, not G28 X0 Y0 Z0
May 20, 2015 11:05 AM - Mike Kelly: so annoying because it doesn't home properly like that
May 20, 2015 11:05 AM - Mike Kelly: really it's just so crappy it's unbelievable
May 20, 2015 11:05 AM - Mike Kelly: the ONLY nice thing is print history
May 20, 2015 11:05 AM - Mike Kelly: the queue is annoying and i don't understand why you'd use it
May 20, 2015 11:05 AM - daniel871: Anybody print that Pick Of Destiny from yesterday?
May 20, 2015 11:06 AM - Mike Glass: I kinda liked the online status
May 20, 2015 11:06 AM - daniel871: Print Queue would be useful if the printer would automatically dump the finished print and start the next one.
May 20, 2015 11:06 AM - Mike Kelly: online status?
May 20, 2015 11:06 AM - jbigler1986: MG i'm printing that dragon tonight. wanted to test craftware with a ton of support
May 20, 2015 11:06 AM - Mike Kelly: true that daniel
May 20, 2015 11:06 AM - Mike Glass: showed your status of your printer online
May 20, 2015 11:06 AM - Mike Kelly: getting a text message is also kinda nice, but repetier has that
May 20, 2015 11:07 AM - Mike Kelly: oh that's interesting didn't ever play with that
May 20, 2015 11:07 AM - Mike Kelly: but yeah, too many bad parts
May 20, 2015 11:07 AM - daniel871: That would be the only reason to use MC now.
May 20, 2015 11:07 AM - Mike Glass: great for beginners, at least it used to be.
May 20, 2015 11:07 AM - Mike Kelly: i just remote in anyways so idc about that
May 20, 2015 11:07 AM - daniel871: Use it to start a program generated by S3D, then get the notification when finished.
May 20, 2015 11:07 AM - jbigler1986: same
May 20, 2015 11:08 AM - Mike Kelly: if i could solve my printing over usb issue with repetier i'd use that
May 20, 2015 11:08 AM - Mike Kelly: but i'm lazy and don't want to do SD prints every time
May 20, 2015 11:08 AM - jbigler1986: only remote in if i need to restart the stream or stop a print
May 20, 2015 11:08 AM - Mike Glass: not sure why you have issues with repetier
May 20, 2015 11:09 AM - daniel871: Oh, that reminds me that I need to download and install that for my PC.
May 20, 2015 11:09 AM - Mike Kelly: me neither, i think i need to do a complete wipe of it
May 20, 2015 11:09 AM - daniel871: Also Craftware.
May 20, 2015 11:09 AM - daniel871: Fifty 3D printing software packaged to play with.
May 20, 2015 11:09 AM - Mike Glass: I am using it for my cnc controller
May 20, 2015 11:09 AM - daniel871: Except Matter Control, F-that.
May 20, 2015 11:10 AM - donhuevo: MfnC
May 20, 2015 11:10 AM - jbigler1986: it's has a lot of options you can change. the UI looks like poop. Idc about that though
May 20, 2015 11:12 AM - Mike Kelly: WHY DOES UPS COME DURING LUNCH
May 20, 2015 11:12 AM - Mike Kelly: idiots
May 20, 2015 11:13 AM - daniel871: So that they can eat lunch while you take delivery. Duh.
May 20, 2015 11:14 AM - donhuevo: I still can't get over getting an Amazon Prime package Easter Sunday
May 20, 2015 11:14 AM - Mike Glass:
May 20, 2015 11:15 AM - donhuevo: I'm thinking it means Amazon has taken over the government
May 20, 2015 11:16 AM - daniel871: Amazon Drones.
May 20, 2015 11:16 AM - Mike Glass: oh yeah just like google
May 20, 2015 11:16 AM - donhuevo: it was the Post Office that dropped it off
May 20, 2015 11:16 AM - donhuevo: and he looked human
May 20, 2015 11:16 AM - daniel871: Amazon Drones everywhere, delivering freedom rockets to everyone that refuses to subscribe to Prime.
May 20, 2015 11:16 AM - jbigler1986: yeah post office delivers on sunday for amazon
May 20, 2015 11:17 AM - daniel871: Gary Busey cheering somewhere while counting his FireTV stick money.
May 20, 2015 11:18 AM - Bill Monroe: back
May 20, 2015 11:18 AM - donhuevo:
May 20, 2015 11:18 AM - jbigler1986: you were never here bill
May 20, 2015 11:19 AM - Bill Monroe: no?
May 20, 2015 11:19 AM - jbigler1986: this is your first time
May 20, 2015 11:19 AM - Bill Monroe: ok, I was here yesterday.. yes?
May 20, 2015 11:19 AM - Bill Monroe: well now I'm.... back
May 20, 2015 11:24 AM - jbigler1986: idk. i have the worst memory
May 20, 2015 11:25 AM - Bill Monroe: well, if you guys were all here, drink would be on me
May 20, 2015 11:25 AM - Bill Monroe: drinks
May 20, 2015 11:25 AM - Bill Monroe: my latest machine came laive today, ran through the torture test, and worked flawlessly
May 20, 2015 11:26 AM - Mike Glass: get a new robo?
May 20, 2015 11:26 AM - Bill Monroe: heh.. I said flawlessly
May 20, 2015 11:26 AM - Bill Monroe: and, it's not a 3D printer
May 20, 2015 11:26 AM - donhuevo: NOT a vibrator
May 20, 2015 11:27 AM - Bill Monroe: don, I told you not to tell
May 20, 2015 11:27 AM - donhuevo: dangit
May 20, 2015 11:27 AM - donhuevo: sorry
May 20, 2015 11:27 AM - Bill Monroe: that;s OK, I dont think anybody noticed
May 20, 2015 11:27 AM - Mike Kelly: i think luckily someone was eating lunch in their car
May 20, 2015 11:27 AM - Mike Kelly: i left so i didn't have to deal
May 20, 2015 11:31 AM - Stephen Capistron: Pics of Bill's new machine in 3 .... 2 ..... 1 .....
May 20, 2015 11:32 AM - Bill Monroe: the marketing folks are getting it ready.. bunch of cams
May 20, 2015 11:32 AM - Bill Monroe: i've pit a gopro on the arm, as soon as the SQE folkx finish doing their thing the tech will retreive it for me

 

May 20, 2015 11:34 AM - Mike Kelly: http://gfycat.com/AnnualFrailEkaltadeta forgot how to car
May 20, 2015 11:42 AM - Mike Kelly: extremely useless box: http://i.imgur.com/xDGN5qc.gif
May 20, 2015 11:44 AM - donhuevo: I want one
May 20, 2015 11:45 AM - Mike Kelly: right? looks like fun
May 20, 2015 11:45 AM - donhuevo: definitely. Shouldn't be hard to make one
May 20, 2015 11:53 AM - Mike Glass: haha funny
May 20, 2015 11:58 AM - jbigler1986: so it's a machine for work Bill?
May 20, 2015 11:59 AM - donhuevo: its NOT a vibrator
May 20, 2015 11:59 AM - jbigler1986: has to be a tiko then
May 20, 2015 12:00 PM - Mike Glass: I wouldnt go that far don.
May 20, 2015 12:00 PM - Bill Monroe: ya, for work..
May 20, 2015 12:00 PM - Mike Kelly: they call it "fister-roboto"
May 20, 2015 12:00 PM - jbigler1986: so 150k?
May 20, 2015 12:01 PM - Mike Kelly: though no one here watches Archer so that joke probably makes no sense
May 20, 2015 12:01 PM - donhuevo: love Archer
May 20, 2015 12:01 PM - Bill Monroe: hard to say,, sales will muck with the price when they rool it into software licenses, supplies costs, packages including other products, etc..
May 20, 2015 12:02 PM - Bill Monroe: cogs is around 360K so if they follow their usual practice, list will be just north of a million
May 20, 2015 12:08 PM - donhuevo: I'd love to see a scrimage between Mike's team of scientists and Bill's
May 20, 2015 12:09 PM - daniel871: I used to watch Archer, but haven't caught the last couple seasons.
May 20, 2015 12:09 PM - daniel871: Last thing I saw was the Top Gun spoof.
May 20, 2015 12:10 PM - donhuevo: On-Demand that shit
May 20, 2015 12:13 PM - Mike Glass: It's the bottom of the 9th, the score is tied its time for the big one.
May 20, 2015 12:13 PM - daniel871: Can't, fired the satellite company because free HD OTA TV was too good.
May 20, 2015 12:13 PM - daniel871: I'll look for it on Netflix/Hulu.
May 20, 2015 12:14 PM - daniel871: (because both together are far cheaper than cable/satellite)
May 20, 2015 12:15 PM - jbigler1986: i would not pay for hulu
May 20, 2015 12:17 PM - Mike Glass: what do you pay for?
May 20, 2015 12:21 PM - daniel871: Hookers and blow?
May 20, 2015 12:24 PM - Mike Kelly: i like hulu
May 20, 2015 12:24 PM - jbigler1986: netflix. primewire is free, xbmc is free
May 20, 2015 12:24 PM - Mike Kelly: they just added season 5 of archer on netflix
May 20, 2015 12:25 PM - Mike Kelly: good news/bad news
May 20, 2015 12:25 PM - Mike Kelly: good news, pin remover worked on one half
May 20, 2015 12:25 PM - Mike Kelly: bad news is it didn't work on the female half, too big for the holes
May 20, 2015 12:25 PM - donhuevo: ummmm
May 20, 2015 12:26 PM - Mike Kelly: good news, the one i got from radioshack for removing db9 pins works somewhat
May 20, 2015 12:26 PM - Mike Kelly: you can say it don
May 20, 2015 12:26 PM - donhuevo: need I say it?
May 20, 2015 12:26 PM - Mike Glass: Do it
May 20, 2015 12:27 PM - donhuevo: well, IF she said it, she certainly never said it to me
May 20, 2015 12:27 PM - Mike Kelly: haha
May 20, 2015 12:28 PM - jbigler1986: funny stuff there
May 20, 2015 12:28 PM - Mike Glass: ok I just got that...omg.lol
May 20, 2015 12:28 PM - Mike Glass: My mind is not clearly in the gutter
May 20, 2015 12:29 PM - donhuevo: always important to keep an eye out for stuff she said
May 20, 2015 12:29 PM - Mike Kelly: don's real name is michael scott
May 20, 2015 12:29 PM - jbigler1986: love that show
May 20, 2015 12:30 PM - Mike Glass: dumbass show
May 20, 2015 12:30 PM - daniel871:
May 20, 2015 12:30 PM - daniel871: Woo!
May 20, 2015 12:30 PM - Mike Kelly: lol
May 20, 2015 12:30 PM - Mike Kelly: mike you're a negative nancy
May 20, 2015 12:31 PM - daniel871: Best typo or worst typo?
May 20, 2015 12:31 PM - Mike Glass: http://3.bp.blogspot.com/-12p20VjF7Tc/UjHkyZLKK4I/AAAAAAAAG98/a7ytq46Xgq4/s400/debbie+downer.png
May 20, 2015 12:31 PM - donhuevo:
May 20, 2015 12:33 PM - Mike Glass: ugg porn blocker blocking all your images..need to get the laptop out
May 20, 2015 12:33 PM - Mike Kelly: aren't you IT? can't you disable it
May 20, 2015 12:34 PM - donhuevo: too funny
May 20, 2015 12:34 PM - donhuevo: on too many levels
May 20, 2015 12:34 PM - daniel871: Not seeing it here, either.
May 20, 2015 12:34 PM - donhuevo: hmmm
May 20, 2015 12:34 PM - daniel871: But there is no porn blocker where I work.
May 20, 2015 12:34 PM - Mike Kelly: http://chickencrap.com/media_images/5051.jpg
May 20, 2015 12:34 PM - Mike Kelly: ot
May 20, 2015 12:34 PM - Mike Kelly: it's not a hot link is why
May 20, 2015 12:34 PM - daniel871: (because one of the VPs likes his porn)
May 20, 2015 12:35 PM - Mike Glass: I could but thats work
May 20, 2015 12:35 PM - daniel871: Gets to the page, image still doesn't load.
May 20, 2015 12:35 PM - donhuevo: how about now...
May 20, 2015 12:35 PM - daniel871: Just the banner stuff and the comments on the right side.
May 20, 2015 12:35 PM - Mike Kelly: yeah it took mine a second to load
May 20, 2015 12:35 PM - Mike Glass: grandpa
May 20, 2015 12:35 PM - daniel871: That last post loaded.
May 20, 2015 12:36 PM - Mike Kelly: he moved it to imgur
May 20, 2015 12:36 PM - donhuevo: long way to go for a stupid joke
May 20, 2015 12:36 PM - donhuevo: makin' me work for it
May 20, 2015 12:36 PM - daniel871: I want a STL of the thing in this GIF.
May 20, 2015 12:37 PM - Mike Kelly: that would be fun
May 20, 2015 12:37 PM - Mike Glass: ohh t-slot just came in, nice stuff
May 20, 2015 12:37 PM - Mike Kelly: "when no means yes"
May 20, 2015 12:37 PM - daniel871: I'm thinking it would put the support material bits of the slicer software through it's paces too.
May 20, 2015 12:37 PM - daniel871: Depending on how big you made it.
May 20, 2015 12:38 PM - donhuevo: it won't stop. it's creeping me out now
May 20, 2015 12:38 PM - daniel871:
May 20, 2015 12:39 PM - donhuevo:
May 20, 2015 12:40 PM - Mike Glass:
May 20, 2015 12:41 PM - jbigler1986:
May 20, 2015 12:41 PM - Stephen Capistron: that no / yes thing shouldn't be too hard. Little boolean function on two extruded parts. Only question is what angle do you think that rotates through?
May 20, 2015 12:42 PM - Stephen Capistron: http://www.thingiverse.com/thing:760544
May 20, 2015 12:42 PM - Stephen Capistron: nevermind
May 20, 2015 12:42 PM - daniel871: Probably about 90 degrees given the platform.
May 20, 2015 12:42 PM - Mike Kelly: WOOO pins out
May 20, 2015 12:42 PM - daniel871: Holy shit, Stephen.
May 20, 2015 12:42 PM - daniel871: Thanks.
May 20, 2015 12:43 PM - Mike Kelly: and sometimes NES
May 20, 2015 12:43 PM - daniel871:
May 20, 2015 12:43 PM - Mike Glass: Ok who is going to print it first
May 20, 2015 12:44 PM - daniel871: I'll give it a shot, maybe that big platform will stick to the bed good.
May 20, 2015 12:44 PM - Stephen Capistron: who ever happens to be at home right meow
May 20, 2015 12:44 PM - Stephen Capistron: or Bill if he throws it into the Stras

 

May 20, 2015 12:44 PM - daniel871: Alright Dave Navarro.
May 20, 2015 12:45 PM - daniel871: (unless he's not the only guy that says "meow" instead of "now" in interviews)
May 20, 2015 12:45 PM - Mike Glass: haha
May 20, 2015 12:47 PM - Stephen Capistron: MK print this too http://www.thingiverse.com/thing:170320
May 20, 2015 12:47 PM - Stephen Capistron: errr, supertroopers
May 20, 2015 12:47 PM - Mike Kelly: yeah that would be fun
May 20, 2015 12:48 PM - Stephen Capistron: you can start a little collection of powertrains
May 20, 2015 12:48 PM - Mike Glass: I bet it makes one wankle of a sound
May 20, 2015 12:49 PM - Mike Glass: I dont remember this game.
May 20, 2015 12:49 PM - Mike Kelly: popular in the 80's
May 20, 2015 12:49 PM - Mike Kelly: i need to get some PC and make a working steam engine
May 20, 2015 12:50 PM - Mike Glass: Arent you on a PC?
May 20, 2015 12:50 PM - daniel871: polycarbonate?
May 20, 2015 12:50 PM - Mike Kelly: right
May 20, 2015 12:50 PM - Stephen Capistron: I think he means PCP
May 20, 2015 12:51 PM - Mike Glass: haha
May 20, 2015 12:51 PM - Mike Kelly: that too
May 20, 2015 12:51 PM - Mike Kelly: print some pc from my pc while on pcp
May 20, 2015 12:53 PM - mark tomlinson: I'd buy that for a dollar
May 20, 2015 12:53 PM - mark tomlinson: (sorry, can't do the voice)
May 20, 2015 12:57 PM - jbigler1986: WTF
May 20, 2015 12:57 PM - Mike Kelly: classy individuals
May 20, 2015 12:57 PM - Mike Glass: let me guess, Walmart!
May 20, 2015 12:57 PM - jbigler1986: LMAO
May 20, 2015 12:57 PM - Mike Kelly: bottom right
May 20, 2015 12:58 PM - Mike Kelly: does it spin while he's driving
May 20, 2015 12:59 PM - jbigler1986: true badasses
May 20, 2015 1:01 PM - jbigler1986: this seams about right
May 20, 2015 1:01 PM - Mike Kelly: i want a goat...
May 20, 2015 1:01 PM - Mike Kelly: then i won't have to mow the lawn
May 20, 2015 1:02 PM - Mike Glass: they will destroy everything you own.
May 20, 2015 1:03 PM - Mike Kelly: my dogs already handle that
May 20, 2015 1:04 PM - Stephen Capistron: A sheep would be easier to control
May 20, 2015 1:04 PM - Mike Glass: or a lawnmower
May 20, 2015 1:04 PM - Mike Kelly: yeah but sheeps eat out the roots
May 20, 2015 1:04 PM - Stephen Capistron: a cow?
May 20, 2015 1:05 PM - Mike Kelly: same problem
May 20, 2015 1:05 PM - Mike Kelly: goats are the only one who eat the blade only
May 20, 2015 1:05 PM - Stephen Capistron: llama? alpaca?
May 20, 2015 1:05 PM - Mike Kelly: also they don't make pigmy cows
May 20, 2015 1:06 PM - Stephen Capistron: Yeah they do, all you have to do is go to a slaughterhouse every few months and then get a new one
May 20, 2015 1:06 PM - Mike Kelly: i do like veal...
May 20, 2015 1:07 PM - Mike Kelly: alright fixed half the wiring up
May 20, 2015 1:08 PM - Mike Kelly: i think i just need to say screw z height and make a lid for my carriage to hide the wiring
May 20, 2015 1:09 PM - Stephen Capistron: So my wife and I were in Scotland about a year ago and we were taking the train from Inverness down to Edinburgh. A lovely trip through the countryside, little lambs frollicing about. The whole nine yards. So of course at dinner I order the lamb and lean over to my wife and say "you remember those little lambs we saw running around, this is the one on the left"
May 20, 2015 1:10 PM - daniel871: Reminds me of a joke about kilts.
May 20, 2015 1:10 PM - Mike Kelly: lol you've got a bit of a morbid sense of humor don't ya?
May 20, 2015 1:10 PM - daniel871: Punchline was "because sheep run if they hear a zipper".
May 20, 2015 1:10 PM - Stephen Capistron: sometimes
May 20, 2015 1:11 PM - jbigler1986: rack of lamb is delicious
May 20, 2015 1:11 PM - Mike Kelly: ^
May 20, 2015 1:12 PM - Stephen Capistron: you guys do a lot of lamb in colorado
May 20, 2015 1:12 PM - daniel871: Also, this owns all other People of Walmart images.
May 20, 2015 1:12 PM - daniel871: Tuck tits into pants, good to go.
May 20, 2015 1:12 PM - Stephen Capistron: Can people of walmart go into the same bucket as politics?
May 20, 2015 1:12 PM - Mike Kelly: haha
May 20, 2015 1:12 PM - Mike Kelly: yeah i think we have enough people of walmart
May 20, 2015 1:13 PM - daniel871: What if I made a Tglase Lithophane of some of those images?
May 20, 2015 1:13 PM - Mike Kelly: that's allowed
May 20, 2015 1:13 PM - daniel871:
May 20, 2015 1:14 PM - jbigler1986: now i want some lamb. or at the least a nice steak
May 20, 2015 1:15 PM - Mike Kelly: i love me some buffalo
May 20, 2015 1:15 PM - Mike Kelly: i'm with ted, buffalo should be our primary red meat
May 20, 2015 1:15 PM - Mike Glass: Turner is such an ass though
May 20, 2015 1:16 PM - Mike Kelly: oh totally
May 20, 2015 1:16 PM - Mike Kelly: but buffalo is such a better livestock than cattle
May 20, 2015 1:16 PM - daniel871: Ugh. 3 hours and 20 minutes for that last one.
May 20, 2015 1:17 PM - Stephen Capistron: I'm a pork kind of guy
May 20, 2015 1:17 PM - daniel871: Also lost some detail.
May 20, 2015 1:18 PM - Mike Glass: lol
May 20, 2015 1:18 PM - Stephen Capistron: but it is hard to find good pork, the other white meat campaign really ruined it
May 20, 2015 1:18 PM - daniel871: I'm liking how easy that lithophane web app makes the STL creation from an image file though.
May 20, 2015 1:18 PM - Stephen Capistron: I can see Daniel starting a whole side business selling lithopanes of people of walmart to people at walmart
May 20, 2015 1:19 PM - Mike Glass: does anybody have any lithopanes they have done they can show?
May 20, 2015 1:19 PM - Stephen Capistron: And then have someone take a picture of that activity and make a lithopane of that
May 20, 2015 1:20 PM - daniel871: I'm going to try to print this one and put it on my desk at work.
May 20, 2015 1:21 PM - daniel871: Just trying to decide whether to do it in green, red or clear T-glase (have a roll of each).
May 20, 2015 1:21 PM - Mike Glass: what the hell is it
May 20, 2015 1:21 PM - daniel871: Wet end of a paper machine, modeled in Solidworks.
May 20, 2015 1:21 PM - Mike Glass: dont think clear would work with those
May 20, 2015 1:22 PM - Stephen Capistron: can the lithopanes be made flat instead of curved?
May 20, 2015 1:22 PM - daniel871: Yeah.
May 20, 2015 1:22 PM - daniel871: There are all kinds of options here. Hang on and I'll post the link.
May 20, 2015 1:22 PM - daniel871: http://3dp.rocks/lithophane/
May 20, 2015 1:22 PM - Stephen Capistron: even if the detail doesn't come out quite right you could always use it as a stamp
May 20, 2015 1:22 PM - jbigler1986: what is the link to that site again
May 20, 2015 1:23 PM - jbigler1986: nvm
May 20, 2015 1:23 PM - Mike Glass: Its subtrative not additive so stamp would not work
May 20, 2015 1:23 PM - daniel871: Basically, go to the image tab and upload your image, then go to the settings and fiddle with how big/detailed you want it, then go to the middle tab and pick the type of lithophane, then refresh and save your STL.
May 20, 2015 1:24 PM - daniel871: Refresh with the button in the app, not the browser.
May 20, 2015 1:24 PM - Stephen Capistron: ok, then cast urethane on top of it and use that as a stamp
May 20, 2015 1:24 PM - Mike Glass: That you could SC
May 20, 2015 1:24 PM - Stephen Capistron: or make a lithopane of the negative
May 20, 2015 1:24 PM - Mike Glass: I can do these on the cnc with corian or just plain old plastic cutting boards
May 20, 2015 1:25 PM - Stephen Capistron: these are surprisingly good although difficult to mix > http://www.mcmaster.com/#urethane-casting-compounds/=x9m6nc
May 20, 2015 1:25 PM - Stephen Capistron: Unless you have access to a paint shaker
May 20, 2015 1:25 PM - Mike Glass: Or like Bill, and his giant vib.
May 20, 2015 1:25 PM - daniel871: I figured the lithophane thing there would be good for people that don't have Vcarve or a CNC mill though.
May 20, 2015 1:26 PM - daniel871:
May 20, 2015 1:26 PM - Mike Glass: Then I would have to be one of those people Not

 

May 20, 2015 1:26 PM - Mike Kelly: i thought cura or something can make lithopanes
May 20, 2015 1:27 PM - daniel871: S3D supposedly can as well, but I couldn't get it to work as easily as this app does.
May 20, 2015 1:27 PM - daniel871: Kept getting blank STL files.
May 20, 2015 1:28 PM - daniel871: Would be nice to have that app in a form that could download and run off your PC though.
May 20, 2015 1:29 PM - Stephen Capistron: it is harder for them to track your movements if you go off line
May 20, 2015 1:29 PM - Mike Glass: there actually is
May 20, 2015 1:29 PM - Mike Glass: I have it at home let me check
May 20, 2015 1:32 PM - Mike Glass: lithophane 3d is the one I have
May 20, 2015 1:35 PM - bamhm182: Hey guys
May 20, 2015 1:36 PM - toy: mk, on the bondtechs. when it says to drill out the 3mm hole...are they talking about the hole the filament travels through?
May 20, 2015 1:36 PM - Mike Kelly: no probably the holes for the screws
May 20, 2015 1:36 PM - Mike Kelly: the filament hole i think is 2mm
May 20, 2015 1:36 PM - Mike Kelly: http://www.instructables.com/id/REUSE-YOUR-OLD-LAPTOP-BATTERY-TO-MAKE-A-POWER-BANK/?ALLSTEPS i knew i saved that old battery pack for a reason
May 20, 2015 1:37 PM - toy: did u do any drilling?
May 20, 2015 1:37 PM - Mike Kelly: yeah on the screw holes i bored them out
May 20, 2015 1:38 PM - toy: stepper mount holes?
May 20, 2015 1:38 PM - Mike Kelly: right
May 20, 2015 1:39 PM - toy: what about the the 2 holes that keep the housings attached?
May 20, 2015 1:39 PM - Mike Kelly: man i think i need to get some dimensions from a part in our other building
May 20, 2015 1:39 PM - Mike Kelly: same thing
May 20, 2015 1:39 PM - Stephen Capistron: someone in germany launched a "will the tesla home battery save you money" calculator
May 20, 2015 1:39 PM - Mike Glass: maybe across the state
May 20, 2015 1:40 PM - Mike Kelly: i think he says that because on his model he has the support material to print the holeson
May 20, 2015 1:40 PM - Mike Kelly: so they print "solid"
May 20, 2015 1:40 PM - Mike Kelly: and need to have that material removed
May 20, 2015 1:40 PM - Mike Kelly: i'll be back
May 20, 2015 1:42 PM - Mike Glass: Get them while they are availiable
May 20, 2015 1:44 PM - Stephen Capistron: How much did blockbuster miss out on with rewinding fees once dvds came about? Nevermind how much they lost out with netflix
May 20, 2015 1:45 PM - Stephen Capistron: and if anyone is interested, netflix has interesting HR policies https://www.google.com/url?sa=t&rct...=n9YP1bokDL-5yco5KKPUVg&bvm=bv.93756505,d.b2w
May 20, 2015 2:11 PM - Mike Kelly: you find the longest articles
May 20, 2015 2:28 PM - toy: mk whats the best way to install the press fit connectors
May 20, 2015 2:29 PM - Mike Kelly: i used a soldering iron
May 20, 2015 2:29 PM - toy: ok thanks
May 20, 2015 2:30 PM - jbigler1986: KY of course
May 20, 2015 2:34 PM - Mike Glass: you home now JB
May 20, 2015 2:50 PM - Mike Kelly: stephen that article is good though
May 20, 2015 2:57 PM - Mike Kelly: i finally got a perfect A block
May 20, 2015 2:57 PM - Mike Kelly: now to do some light sanding and then a vapor polish
May 20, 2015 3:03 PM - Mike Glass: what did you change?
May 20, 2015 3:04 PM - jbigler1986: http://m.ustream.tv/channel/jbigler1986
May 20, 2015 3:04 PM - jbigler1986: Looking awesome
May 20, 2015 3:07 PM - Mike Glass: hey were's my dragon?
May 20, 2015 3:07 PM - jbigler1986: Gonna print that dragon with support overnight
May 20, 2015 3:07 PM - Mike Glass: No support
May 20, 2015 3:07 PM - jbigler1986: Well start it after this is done that is
May 20, 2015 3:07 PM - jbigler1986: Using craftware
May 20, 2015 3:08 PM - Mike Glass: You dont need support
May 20, 2015 3:08 PM - jbigler1986: Well I want to test it with something that needs a bunch of support
May 20, 2015 3:08 PM - jbigler1986: So find me something good and small that needs support
May 20, 2015 3:09 PM - Mike Glass: ok I got just the one.
May 20, 2015 3:09 PM - jbigler1986: I will print that then the Dragon overnight
May 20, 2015 3:09 PM - Mike Glass: http://www.thingiverse.com/thing:218026
May 20, 2015 3:10 PM - jbigler1986: Lol. That going to be overnight
May 20, 2015 3:10 PM - Mike Glass: oh yea didnt see that
May 20, 2015 3:10 PM - Mike Glass: thats the next one I want to do
May 20, 2015 3:11 PM - jbigler1986: That's the one I was going to print with support
May 20, 2015 3:11 PM - jbigler1986: I will scale it down
May 20, 2015 3:11 PM - jbigler1986: The one you want is the singing one right?
May 20, 2015 3:12 PM - Mike Glass: how about a knot http://www.thingiverse.com/thing:8770/#files
May 20, 2015 3:13 PM - jbigler1986: Deal. That shouldn't take long
May 20, 2015 3:13 PM - Mike Glass: either one, that one looks harder for sure, the better dragon one.
May 20, 2015 3:14 PM - Mike Glass: Mine took 14 hours@ 60mms but noticed I did it at .1
May 20, 2015 3:14 PM - jbigler1986: How small should I scale it. Don't want to go over 2 hours
May 20, 2015 3:15 PM - Mike Glass: the knot?
May 20, 2015 3:15 PM - jbigler1986: Which one would be a better test for support
May 20, 2015 3:16 PM - Mike Glass: maybe not the knot, not
May 20, 2015 3:17 PM - Mike Kelly: Mike: I changed which part of the block was which color
May 20, 2015 3:17 PM - Mike Kelly: https://plus.google.com/u/1/+Techmog/posts/h6rL8cMeu4p lmao
May 20, 2015 3:18 PM - toy: 1 bondtech extruder printed and assembled
May 20, 2015 3:18 PM - Mike Kelly: sweet
May 20, 2015 3:19 PM - toy: the printed part needed some cleaning up, the oval hole for the floatring shaft was undersized
May 20, 2015 3:20 PM - toy: did u finish your wiring mk?
May 20, 2015 3:22 PM - Mike Kelly: i got the pins out and half put back in
May 20, 2015 3:22 PM - Mike Kelly: should only take like 5 minutes to get back up and running once i'm home
May 20, 2015 3:22 PM - Mike Kelly: https://scontent.xx.fbcdn.net/hphot...=822ecea3a221c06b900941bb2c30371e&oe=55C8E9E4
May 20, 2015 3:25 PM - Mike Glass: Beer
May 20, 2015 3:26 PM - Mike Kelly: i don't care for wheat beer anyways
May 20, 2015 3:45 PM - jbigler1986: About to scale and slice the better dragon.
May 20, 2015 3:45 PM - jbigler1986: Stupid ustream keeps losing connection
May 20, 2015 3:46 PM - Mike Kelly: i'm really annoyed with ustream lately
May 20, 2015 3:47 PM - Mike Kelly: it keeps saying "not enough usb bandwidth available"
May 20, 2015 3:57 PM - jbigler1986: damnit. this thing didn't slice right
May 20, 2015 3:59 PM - jbigler1986: holes on the inside. not a failed print. let me get a pic
May 20, 2015 4:01 PM - jbigler1986:
May 20, 2015 4:02 PM - jbigler1986: I guess that's what I get for not checking it in the slicer
May 20, 2015 4:08 PM - Mike Kelly: yeah it's an easy trap to fall into, slice twice print once should be the new motto
May 20, 2015 4:08 PM - Mike Kelly: or something more catchy
May 20, 2015 4:13 PM - jbigler1986: scaled this thing way down with full support. lets see how it does
May 20, 2015 4:13 PM - jbigler1986: stream is up
May 20, 2015 4:19 PM - jbigler1986: may have scaled it to much. lol. it's gonna be tiny
May 20, 2015 4:21 PM - jbigler1986: maybe not. the claws look really good
May 20, 2015 4:50 PM - jbigler1986: gonna scale it up a little. that was a fail
May 20, 2015 5:47 PM - daniel871: Well shit. Hair spray by itself is holding better than the tape ever did so far.
May 20, 2015 5:48 PM - daniel871: Not too crazy about the smell as it was cooking up during the preheat though.
May 20, 2015 5:48 PM - daniel871: Reminds me of why I avoid hair salons that also do nails.
May 20, 2015 6:11 PM - jbigler1986: I don't mind the smell. Yeah hairspray is amazing. Can't believe you waited this long to use it
May 20, 2015 6:18 PM - jbigler1986: This little dragon is looking really good
May 20, 2015 6:26 PM - WayUpNorthMN: SO how would I go about not having one entire side of my herringbone gears warp upwards?
May 20, 2015 6:28 PM - WayUpNorthMN: Would cooling do that?
May 20, 2015 6:29 PM - jbigler1986: While trying to print them?

 

May 20, 2015 6:30 PM - WayUpNorthMN: Yeah, I am printing a herringbone gear, a small one, and it prints fine the couple of first layers, then the layer on the opposite side of the fan begins violently warping up as the layers go by.
May 20, 2015 6:30 PM - Droid: but can it print bacon? https://www.kickstarter.com/project...and-play-3d-food-printi?ref=category_featured
May 20, 2015 6:31 PM - jbigler1986: Abs or pla?
May 20, 2015 6:31 PM - WayUpNorthMN: PLA
May 20, 2015 6:32 PM - WayUpNorthMN: @Droid is that literally just a printrbot Simple metal?
May 20, 2015 6:32 PM - jbigler1986: You can try an ABS slurry. Or just print it with PLA and you won't have that problem
May 20, 2015 6:34 PM - WayUpNorthMN: No, not print bed adhesion.
May 20, 2015 6:34 PM - WayUpNorthMN: The layers that it is currently printing start to warp upwards.
May 20, 2015 6:34 PM - jbigler1986: Do you have 2 parts fans?
May 20, 2015 6:37 PM - WayUpNorthMN: No, only one.
May 20, 2015 6:37 PM - WayUpNorthMN: Just a single 40mm
May 20, 2015 6:37 PM - WayUpNorthMN: "curling", I guess.
May 20, 2015 6:38 PM - jbigler1986: What temp are you printing at
May 20, 2015 6:40 PM - Droid: yeah it looks like a printbot simple
May 20, 2015 6:40 PM - WayUpNorthMN: 200:70
May 20, 2015 6:41 PM - jbigler1986: Drop the bed temp
May 20, 2015 6:41 PM - WayUpNorthMN: If it helps, I am currently at this exact second not using a shroud.
May 20, 2015 6:41 PM - jbigler1986: Try 50
May 20, 2015 6:41 PM - jbigler1986: Shrouds aren't needed
May 20, 2015 6:42 PM - jbigler1986: 70 is warm for PLA
May 20, 2015 6:42 PM - WayUpNorthMN: Just to try to see if the fan is being too direct on one side. The side that the fan blows on is usually perfect.
May 20, 2015 6:42 PM - WayUpNorthMN: Then on the other side, it is mangled, and curling up, but it is still making perfect contact with the bed. (No warping there)
May 20, 2015 6:43 PM - jbigler1986: Add another parts fan
May 20, 2015 6:44 PM - WayUpNorthMN: How do?
May 20, 2015 6:45 PM - WayUpNorthMN: Can the RAMPS take another fan?
May 20, 2015 6:46 PM - jbigler1986: No. You add it to the x carriage
May 20, 2015 6:47 PM - jbigler1986: Search dual fans robo 3d and you will see what I'm talking about
May 20, 2015 6:49 PM - Mike Glass: jb your not streaming
May 20, 2015 6:49 PM - WayUpNorthMN: Do I need to route another fan to the RAMPS? -.-
May 20, 2015 6:50 PM - WayUpNorthMN: I have never even touched the RAMPS before.
May 20, 2015 6:50 PM - Mike Glass: ramps does not get that hot
May 20, 2015 6:50 PM - WayUpNorthMN: No... *facepalm*
May 20, 2015 6:51 PM - WayUpNorthMN: I am looking to add another parts fan to the robo
May 20, 2015 6:51 PM - Mike Glass: yea just wire it with your existing fan
May 20, 2015 6:52 PM - WayUpNorthMN: How so?
May 20, 2015 6:52 PM - Mike Glass: splice the wires
May 20, 2015 6:52 PM - WayUpNorthMN: Will it have enough power for that?
May 20, 2015 6:53 PM - Mike Glass: yes plenty. or get some of these. http://www.amazon.com/gp/product/B00MJVKKKI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
May 20, 2015 6:53 PM - jbigler1986: Stream is back up
May 20, 2015 6:53 PM - Mike Glass: these are the fans I use. http://www.amazon.com/gp/product/B002OFL1J8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
May 20, 2015 6:54 PM - Mike Glass: I just printed another gear bearing, came of the bed and spun, I slowed this one down to 40 works perfect
May 20, 2015 6:55 PM - Mike Glass: Although the one I did at 60 worked I placed all the start points together and that made it sticky on one roller.
May 20, 2015 6:56 PM - Droid: hour and a half into a 15+ hour print
May 20, 2015 6:57 PM - Droid: swapped nozzle to a .6 to cut down print time
May 20, 2015 6:57 PM - jbigler1986: I love printing moving parts
May 20, 2015 6:58 PM - Mike Glass: Have you printed it JB?
May 20, 2015 6:58 PM - jbigler1986: Not that one. Printed Ball bearings though
May 20, 2015 6:59 PM - Mike Glass: are you doing the "better Dragon" now
May 20, 2015 6:59 PM - jbigler1986: Yeah. Almost done. Gonna change colors then print the singing one
May 20, 2015 7:00 PM - Mike Glass: is it printing the wings now?
May 20, 2015 7:00 PM - jbigler1986: I moved it towards the front of the bed so it looks bigger then what it really is
May 20, 2015 7:01 PM - WayUpNorthMN: https://www.dropbox.com/s/4cdqxytaip9utxl/20150520_210112.jpg?dl=0
May 20, 2015 7:01 PM - WayUpNorthMN: Sorry it's sideways.
May 20, 2015 7:02 PM - jbigler1986: Lower part of the wings and the head. It needs slowed down. No idea what speed it's at
May 20, 2015 7:03 PM - jbigler1986: Thought I set it to 60mm/s but I'm positive it's going faster
May 20, 2015 7:05 PM - WayUpNorthMN: So best thing for me would be to get another fan?
May 20, 2015 7:05 PM - jbigler1986: Do you have a link to that gear. Might as well print it with the Dragon
May 20, 2015 7:06 PM - WayUpNorthMN: Because it is obviously not cooled well enough on that side. What would you recommend for a quick and dirty solution until I get the new fan?
May 20, 2015 7:06 PM - WayUpNorthMN: "Dragon"?
May 20, 2015 7:06 PM - jbigler1986: Yeah. Also turn down the heated bed temp
May 20, 2015 7:06 PM - Mike Glass: http://www.thingiverse.com/thing:53451
May 20, 2015 7:06 PM - WayUpNorthMN: It was at 50.
May 20, 2015 7:06 PM - Mike Glass: do you have a regular fan?
May 20, 2015 7:07 PM - jbigler1986: Thx. Try to lower nozzle temp
May 20, 2015 7:07 PM - WayUpNorthMN: As in... a desk fan?
May 20, 2015 7:07 PM - Mike Glass: I used a desktop fan until I installed the 2nd one
May 20, 2015 7:07 PM - jbigler1986: Yeah
May 20, 2015 7:07 PM - WayUpNorthMN: Lel, that works well?
May 20, 2015 7:08 PM - jbigler1986: Pla likes lots of cooling
May 20, 2015 7:08 PM - Mike Glass: sure as shit
May 20, 2015 7:09 PM - WayUpNorthMN: I'll have to add that to my list. I have a heap of a printer setup right now until a rainy day so I can cable manage the fk out of it. (See: duct tape and zip ties)
May 20, 2015 7:09 PM - jbigler1986: Now it's printing the wings
May 20, 2015 7:09 PM - jbigler1986: Been there
May 20, 2015 7:10 PM - WayUpNorthMN: And for time lapse footage, I am using my laptop, rotated towards the printer, and the light is a flourescent lamp that is meant to go over a stove.
May 20, 2015 7:10 PM - WayUpNorthMN: All on the list.
May 20, 2015 7:12 PM - jbigler1986: Yeah I'm finally done adding stuff to mine after 3 months of upgrading and tweaking stuff
May 20, 2015 7:18 PM - Droid: i run pla at 210 and 50 with zero issues
May 20, 2015 7:18 PM - Mike Glass: damn ads
May 20, 2015 7:19 PM - Mike Glass: ^
May 20, 2015 7:19 PM - Mike Glass: that red is hard to see
May 20, 2015 7:20 PM - Mike Glass: what scale did you do that?
May 20, 2015 7:20 PM - jbigler1986: hell idk. it wasn't a numbered scale. printing way to fast for the size too
May 20, 2015 7:21 PM - jbigler1986: just wanted to test the support really. settings need figured out more that's for sure. haven't dove into them more
May 20, 2015 7:22 PM - jbigler1986: about to slice these parts and get em ready
May 20, 2015 7:23 PM - Mike Glass: IM gonna print the yes no thing
May 20, 2015 7:23 PM - jbigler1986: did you do the 5 or 6 gear
May 20, 2015 7:23 PM - Mike Glass: 6
May 20, 2015 7:24 PM - Mike Glass: looking at the settings I did it at .22..
May 20, 2015 7:24 PM - jbigler1986: random
May 20, 2015 7:25 PM - jbigler1986: love the smell of opening this tub of pla
May 20, 2015 7:25 PM - Mike Glass: sweet smell of moldy corn
May 20, 2015 7:26 PM - jbigler1986: yummy
May 20, 2015 7:30 PM - Mike Glass: what lh are you doing the dragon?
May 20, 2015 7:31 PM - jbigler1986: .2
May 20, 2015 7:31 PM - jbigler1986: .05 lol
May 20, 2015 7:31 PM - Mike Glass: I did mine at .1, I couldnt understand why it was taking so long..lol
May 20, 2015 7:32 PM - Mike Glass: I could of done it in 6 hours
May 20, 2015 7:35 PM - Mike Kelly: heya
May 20, 2015 7:36 PM - jbigler1986: woah
May 20, 2015 7:37 PM - Mike Glass: Is that really you Mike?

 

May 20, 2015 7:37 PM - Mike Kelly: i know right?
May 20, 2015 7:38 PM - Mike Glass: I just spent 3 hours mowing the back yard
May 20, 2015 7:38 PM - Mike Kelly: i got the wiring done, need to level the nozzles
May 20, 2015 7:38 PM - Mike Kelly: lol and i thought i had it bad
May 20, 2015 7:38 PM - Mike Kelly: buy a goat!
May 20, 2015 7:38 PM - Mike Glass: I could borrow the ones across the street.
May 20, 2015 7:39 PM - Mike Kelly: good god the rangers-lightning just got to 5-5
May 20, 2015 7:41 PM - Mike Glass: How can you calculate speed if you change it on the lcd when printing?
May 20, 2015 7:42 PM - Mike Glass: So the print was set at 60mm/s you change the lcd to say 120%, what is the actual speed, just 20% faster?
May 20, 2015 7:42 PM - Mike Kelly: that's what i assume
May 20, 2015 7:42 PM - Mike Kelly: but i think it also increases jerk and acceleration settings
May 20, 2015 7:43 PM - Mike Glass: is that good, or bad
May 20, 2015 7:43 PM - jbigler1986: if you start at 60 and you change it to 120 just multiply 60 x 1.20
May 20, 2015 7:43 PM - Mike Kelly: depends if your machine can handle it
May 20, 2015 7:43 PM - Mike Kelly: though don't quote me on that as I really have very little idea on Feed and Flow %
May 20, 2015 7:43 PM - jbigler1986: so start speed x whatever percentage you change it to
May 20, 2015 7:44 PM - Mike Kelly: i tried messing with that during some calibration cubes and they came out really tall
May 20, 2015 7:44 PM - Mike Kelly: so i haven't messed with them
May 20, 2015 7:45 PM - Mike Glass: so the FR is flow rate, not the same as movement speed?
May 20, 2015 7:46 PM - Mike Kelly: well it did move faster...
May 20, 2015 7:46 PM - Mike Kelly: like i said, that's a bit black box to me
May 20, 2015 7:48 PM - Mike Glass: I use it if the print is going to fast or slow but seems to work, just didnt know the math on what the actual speed may be
May 20, 2015 7:50 PM - Mike Glass: I hope it works good, could be a fun thing for the office
May 20, 2015 7:51 PM - Mike Glass: I should have all my stuff for the sphere bot on tuesday, just ordered a Uno and a few drivers, should be a fun project.
May 20, 2015 7:51 PM - jbigler1986: wtf. print won't start from lcd. hmmm
May 20, 2015 8:03 PM - jbigler1986: ok. not sure wtf was going on
May 20, 2015 8:04 PM - Mike Glass: are you using MC again
May 20, 2015 8:05 PM - jbigler1986: ha. no. s3d. bed heated but not hotend. damnit
May 20, 2015 8:16 PM - jbigler1986: stream is up
May 20, 2015 8:18 PM - jbigler1986: calling it a night gentleman
May 20, 2015 8:18 PM - jbigler1986: night. have fun with whatever you may be doing
May 20, 2015 8:20 PM - Mike Kelly: later
May 20, 2015 8:30 PM - Mike Glass: yea me too so tired.

 

May 21, 2015 1:21 AM - Bill Monroe: goooood morning
May 21, 2015 3:09 AM - jbigler1986: Morning
May 21, 2015 3:11 AM - daniel871: well, bridge nylon printed the herringbone gears pretty well other than the base layer delaminating when I pried them off the bed this morning.
May 21, 2015 3:14 AM - jbigler1986: Hairspray?
May 21, 2015 3:14 AM - daniel871: uhu stick glue
May 21, 2015 3:15 AM - daniel871: S3D had the base layer running slow then speeding up for the remaining layers, which is probably why it separated there.
May 21, 2015 3:16 AM - daniel871: base layer was almost clear while the remaining layers turned white, too.
May 21, 2015 3:16 AM - jbigler1986: That's normal. First layer is always slower than the rest
May 21, 2015 3:16 AM - jbigler1986: Shouldn't have an effect like that
May 21, 2015 3:17 AM - daniel871: I'll take a couple pics for my printer thread when I get back home.
May 21, 2015 3:18 AM - daniel871: bullet box failed on hairspray right as the connection between the support material and the main body was beibg printed.
May 21, 2015 3:18 AM - daniel871: being
May 21, 2015 3:19 AM - daniel871: so I'm going to invert the model in S3D and reprint so that the support will be inside the bucket.
May 21, 2015 3:25 AM - daniel871: Also learned not to leave laywood in the hotend after printing like its regular PLA. had to completely dismantle the hotend and drill it out.
May 21, 2015 3:27 AM - jbigler1986: Oh yeah bullet box you need to have 40 skirt lines so the support has something to hold on to
May 21, 2015 3:27 AM - jbigler1986: Should have mentioned that
May 21, 2015 3:43 AM - daniel871: ah, thanks.
May 21, 2015 4:41 AM - Bill Monroe: morning
May 21, 2015 4:45 AM - jbigler1986: Hello Bill
May 21, 2015 4:46 AM - Bill Monroe: Hi jb
May 21, 2015 4:46 AM - Stephen Capistron: bill you already said morning hours ago
May 21, 2015 4:47 AM - Stephen Capistron: JB did you flip through that Netflix HR presentation?
May 21, 2015 4:47 AM - Bill Monroe: I had no idea my salutations were being tabulated
May 21, 2015 4:49 AM - Stephen Capistron: the man is always watching and logging your actions
May 21, 2015 4:49 AM - Bill Monroe: I guess so
May 21, 2015 4:50 AM - jbigler1986: I did not. I was busy as hell yesterday
May 21, 2015 4:56 AM - Stephen Capistron: bill I want details on your new toy
May 21, 2015 4:56 AM - Bill Monroe: well, it's technically not *my* toy but.. what do you want to know?
May 21, 2015 4:58 AM - Stephen Capistron: what's it do? Pick n place?
May 21, 2015 4:59 AM - Bill Monroe: pretty much.. it's a centralized distrubtion for pharmaceuticals..
May 21, 2015 5:00 AM - Bill Monroe: it's tailored towards the european distribution model, which the US is moving to more and more
May 21, 2015 5:02 AM - Stephen Capistron: who needs a pharmacist lacky right?
May 21, 2015 5:02 AM - Bill Monroe: ya, kinda. europe handles pill distibution differently, and it's gaining popularity here
May 21, 2015 5:04 AM - Bill Monroe: the machine has an additional feature, an ATM-like terminal complete with 2-way coms to a doctor
May 21, 2015 5:05 AM - Bill Monroe: the biggest change is that it doesnt store single-dose packages.. it's able to handle all the multipaks different vendors have, including my company's tamper-evident trackable refillable containers
May 21, 2015 5:05 AM - Bill Monroe: and has refrigeration
May 21, 2015 5:06 AM - Bill Monroe: (I put my snapples in there) told marketing they were simulating IV bottles
May 21, 2015 5:06 AM - Stephen Capistron: ha
May 21, 2015 5:06 AM - Stephen Capistron: now you need to design a machine to refill the machine
May 21, 2015 5:07 AM - Bill Monroe: actually, that's kinda already done
May 21, 2015 5:07 AM - Bill Monroe: there's a bin on the side, pharmacy personell dump the paks in there, it sorts, scans, and stores them
May 21, 2015 5:07 AM - Stephen Capistron: okay, then a machine that goes and picks up your scripts for you
May 21, 2015 5:08 AM - Bill Monroe: we had that, hospitals tried it but it didnt take hold.. apparently patients didnt like sharing hallways with robotic delievery
May 21, 2015 5:09 AM - Stephen Capistron: need to make the robot cute
May 21, 2015 5:09 AM - Stephen Capistron: it should resemble a puppy. people love puppies
May 21, 2015 5:09 AM - Bill Monroe: we call the cute robots candy-stripers
May 21, 2015 5:10 AM - jbigler1986: straight off the printer earlier
May 21, 2015 5:11 AM - Bill Monroe: we have a new product that'll hit limited release at the end of the year.. it's a tray with tracking..
May 21, 2015 5:16 AM - jbigler1986: got this going right now http://www.ustream.tv/channel/jbigler1986
May 21, 2015 5:36 AM - daniel871: Urk, motion blur, *pukes*
May 21, 2015 5:37 AM - daniel871:
May 21, 2015 5:38 AM - jbigler1986: yeah not sure why it started doing that
May 21, 2015 5:38 AM - jbigler1986: need to remount it i guess
May 21, 2015 5:39 AM - daniel871: What webcam/mount are you using by the way?
May 21, 2015 5:39 AM - daniel871: There are pics in your thread, but I think I missed the names for them.
May 21, 2015 5:43 AM - jbigler1986: i designed one
May 21, 2015 5:43 AM - daniel871: There's one on Thingiverse, but for a specific camera.
May 21, 2015 5:43 AM - jbigler1986: webcam is logitech c525 i believe
May 21, 2015 5:44 AM - daniel871: http://www.thingiverse.com/thing:717848
May 21, 2015 5:45 AM - daniel871: Oh hey, check out this spool holder. http://www.thingiverse.com/thing:734576
May 21, 2015 5:46 AM - bamhm182: I used my GoPro for recording a few timelapse videos, it worked pretty well with the holder I made for it that swivels down in front of the carriage
May 21, 2015 5:46 AM - bamhm182: Can't stream though
May 21, 2015 5:47 AM - bamhm182: That's REALLY fancy for a spool holder, haha
May 21, 2015 5:47 AM - jbigler1986: won't work for mine which is why i designed my own. Worked great for a while
May 21, 2015 5:48 AM - bamhm182:
May 21, 2015 5:48 AM - bamhm182: That's mine, my gopro has been acting up recently though, so I quit using it
May 21, 2015 5:48 AM - jbigler1986: yeah that spool holder would be be fine. don't need the nuts and bolts and moving parts
May 21, 2015 5:49 AM - daniel871: That's what makes it super special.
May 21, 2015 5:49 AM - jbigler1986: the spool itself would spin
May 21, 2015 5:49 AM - daniel871:
May 21, 2015 5:49 AM - bamhm182: haha
May 21, 2015 5:49 AM - daniel871: Yeah, I was just laughing at the name for it.
May 21, 2015 5:49 AM - bamhm182: Just need to slap a motor on it
May 21, 2015 5:49 AM - jbigler1986: yeah. lol. might as well
May 21, 2015 5:49 AM - daniel871: Something to keep tension on it.
May 21, 2015 5:50 AM - daniel871: Like another arm with a bearing on it to keep the filament path centered in the slot length.
May 21, 2015 5:50 AM - jbigler1986: i'm still avoiding have spools above the machine again though
May 21, 2015 5:50 AM - daniel871: (and just traveling back and forth with the extruder)
May 21, 2015 5:51 AM - daniel871: I'm thinking about printing this in Nylon and replacing my current LCD mount (which doesn't actually mount because the Y-axis tries to knock it off the machine). http://www.thingiverse.com/thing:681887/#files
May 21, 2015 5:52 AM - Stephen Capistron: I saw one that just had a big fat channel in the top for some large ball bearings to sit in. That is as fancy as I would get. For now I will stick to my tried and true 1/2" breaker bar
May 21, 2015 5:53 AM - jbigler1986: did you see my gear i printed
May 21, 2015 5:53 AM - daniel871: Me? No.
May 21, 2015 5:53 AM - jbigler1986:
May 21, 2015 5:54 AM - Stephen Capistron: http://www.thingiverse.com/thing:687698
May 21, 2015 5:54 AM - bamhm182: Nice
May 21, 2015 5:55 AM - bamhm182: I tried to print the modular carriage earlier and my printer was having none of it. Had to return to work so I didn't have time to troubleshoot
May 21, 2015 5:55 AM - jbigler1986: lol stephen
May 21, 2015 5:56 AM - Stephen Capistron:
May 21, 2015 5:56 AM - bamhm182: I like how the finger checks if the switch has been pressed like it's paranoid about it
May 21, 2015 6:00 AM - Stephen Capistron: i think he might have put the switch in a middle / have triggered position, but i don't know
May 21, 2015 6:00 AM - bamhm182: Oh, nevermind then
May 21, 2015 6:00 AM - bamhm182: Still funny
May 21, 2015 6:00 AM - Stephen Capistron: without a doubt
May 21, 2015 6:00 AM - bamhm182: You could totally program it to check too since it's arduino based
May 21, 2015 6:00 AM - Stephen Capistron: this guy has too much time >
May 21, 2015 6:01 AM - bamhm182: I'd make the finger a tiny person
May 21, 2015 6:01 AM - bamhm182: Yeah he does, I want that much free time
May 21, 2015 6:01 AM - jbigler1986: lol
May 21, 2015 6:02 AM - Stephen Capistron: i was going to say add another servo so when it checks on the switch it turns left and right like it is looking around
May 21, 2015 6:02 AM - bamhm182: That too

 

May 21, 2015 6:03 AM - bamhm182: That video's great jb, I'm going to have to remember it
May 21, 2015 6:05 AM - Stephen Capistron: how about a box that only flips the other boxes switch
May 21, 2015 6:06 AM - Stephen Capistron: dangerous >
May 21, 2015 6:08 AM - bamhm182: I wonder what he had in there? Capacitor that got overcharged maybe? Those are good at exploding
May 21, 2015 6:09 AM - daniel871: What do you guys think, will this work without support?
May 21, 2015 6:09 AM - daniel871: Should, not will, rather.
May 21, 2015 6:10 AM - Stephen Capistron: back cover is a little iffy. PLA? Could always try craftware.
May 21, 2015 6:11 AM - jbigler1986: s3d you can manually add support
May 21, 2015 6:11 AM - jbigler1986: just add a little there
May 21, 2015 6:11 AM - daniel871: This will be Bridge.
May 21, 2015 6:12 AM - daniel871: If that makes a difference.
May 21, 2015 6:15 AM - daniel871: Added some support to just that back cover and will give it a shot.
May 21, 2015 6:16 AM - daniel871: Side question about bed adhesion, is there any reason not to use the glue stick for materials other than Bridge?
May 21, 2015 6:17 AM - bamhm182: Anyways, should probably get to bed, later guys
May 21, 2015 6:17 AM - Stephen Capistron: I live and die by hairspray myself
May 21, 2015 6:17 AM - jbigler1986: ^
May 21, 2015 6:17 AM - jbigler1986: so easy to use and holds great
May 21, 2015 6:18 AM - daniel871: Yeah, I got a big bottle of Aquanet to use, it just stinks.
May 21, 2015 6:19 AM - jbigler1986: leaves the part super smooth and shiny
May 21, 2015 6:19 AM - jbigler1986: smells like hairspray. goes away after a few secnds
May 21, 2015 6:21 AM - Stephen Capistron: I just put a small box over the print bed to contain everything
May 21, 2015 6:21 AM - Stephen Capistron: unless i am printing something small, then i just put a little hit in the middle
May 21, 2015 6:22 AM - daniel871: That's what I was doing yesterday. Just the bullet box for a X-axis counterweight.
May 21, 2015 6:23 AM - Stephen Capistron: Right now my counterweight is a failed part and a 3/8" hex key zip tied to the side
May 21, 2015 6:23 AM - Stephen Capistron: I should fix that
May 21, 2015 6:24 AM - daniel871: Right now my counterweight is that magnetic angle finder I use to double-check the X-axis being parallel to the bed.
May 21, 2015 6:24 AM - daniel871: Which isn't quite heavy enough, but takes most of the chatter out.
May 21, 2015 6:25 AM - daniel871: (with the magnets turned away from the rods since they won't stick anyway)
May 21, 2015 6:25 AM - daniel871: And a small tin of Carmex because it was the only thing made of metal that would stick to the magnet that I had on hand.
May 21, 2015 6:26 AM - daniel871: It stays balanced on the back side of the axis, but I figure it would be better to have the bullet box so I didn't have to worry about a rapid move or tall print colliding.
May 21, 2015 6:30 AM - Stephen Capistron: I print topless so space is not really a concern
May 21, 2015 6:40 AM - jbigler1986: since i added the bullet box i have yet to mess with leveling the bed again. it's been perfect
May 21, 2015 6:41 AM - jbigler1986: ahhhhhhhh. Fuck you ustream. Loses connection every 5 minutes
May 21, 2015 6:41 AM - Stephen Capistron: At some point Robo should think of shipping them with a counterwieght
May 21, 2015 6:45 AM - jbigler1986: agreed
May 21, 2015 6:52 AM - Stephen Capistron: I'm going through a giant draft spreadsheet another engineer has put together and it is brutal. I'm no English language wiz, clearly, but some of the stuff in this thing is just non-sensical
May 21, 2015 6:56 AM - Stephen Capistron: I can't tell you how many times I have fixed "word(word..." and sentences that reads "user using ... ... useful"
May 21, 2015 7:03 AM - daniel871: Palindrome instructions for templates are also a pain to sort out.
May 21, 2015 7:04 AM - daniel871: Doesn't happen often, but I think it's from someone using a bad google translation from Spanish or something for some of the OEM stuff we have from Central/South America
May 21, 2015 7:06 AM - daniel871: "This configuration includes SST hardware (hardware SST not necessarily included)" being a literal quote from some of the stuff I've seen.
May 21, 2015 7:06 AM - daniel871: One of those should have been "requires" but I don't know how they would screw that up.
May 21, 2015 7:08 AM - daniel871: Oh, speaking of work, are there any planetary gear scripts that aren't written for SCAD, or are they hidden somewhere in Solidworks where I wouldn't know about unless someone pointed it out?
May 21, 2015 7:10 AM - Stephen Capistron: It doesn't work great but you can open STL files in FreeCad, convert it to a solid, save it as a STEP file, then open in SW
May 21, 2015 7:11 AM - Stephen Capistron: It is a dumb featureless solid, but it beats a blank
May 21, 2015 7:11 AM - daniel871: I mean more for creating a custom planetary assembly like the emmet gears as a starting point to build off of the Sun and Ring gears.
May 21, 2015 7:12 AM - daniel871: Or should I suffer learning SCAD to go through the steps you talk about?
May 21, 2015 7:13 AM - daniel871: Or whatever program those files were created in.
May 21, 2015 7:13 AM - Stephen Capistron: Well once you have that dumb body you can extrude and cut to your hearts content on it
May 21, 2015 7:13 AM - jbigler1986: SW needs to add stl feature
May 21, 2015 7:13 AM - jbigler1986: I would buy it if it did
May 21, 2015 7:14 AM - Stephen Capistron: They never will. The people that pay for it have no need for it.
May 21, 2015 7:14 AM - jbigler1986: i'm sure it wouldn't be that hard. it can export it fine
May 21, 2015 7:15 AM - daniel871: You can "import" STLs and run feature recognition with Solidworks Premium, it just isn't every good at it.
May 21, 2015 7:15 AM - daniel871: You have to specifically say ".STL" in the Open File command for it to work though.
May 21, 2015 7:16 AM - daniel871: It absolutely hated the Greg's Wade E3D body on Thingiverse when I tried it.
May 21, 2015 7:16 AM - jbigler1986: i want to load an stl and edit it
May 21, 2015 7:16 AM - daniel871: You'd have to run featureworks on the Data Migration tab, edit and then export again.
May 21, 2015 7:16 AM - jbigler1986: i have been using tinkercad to edit some stl files. it's not bad for that. designing from scrath i use SW
May 21, 2015 7:17 AM - daniel871: That's the thing, I need to bone up on designing from scratch in SW for the planetary gear stuff.
May 21, 2015 7:17 AM - daniel871: Found an assembly on GrabCAD, but the setup is way too big at 8" diameter for what I want to do.
May 21, 2015 7:18 AM - daniel871: (and no configurations/equations to work with, everything was modeled what I would call "the hard way" for each gear).
May 21, 2015 7:19 AM - Stephen Capistron: can't just scale it to the size you want in SW?
May 21, 2015 7:20 AM - daniel871: Haven't tried it yet. Figured I'd got to each part and apply the same scaling factor and hope for the best.
May 21, 2015 7:20 AM - daniel871: go
May 21, 2015 7:21 AM - daniel871: And build a new assembly file since that will probably break the original
May 21, 2015 7:21 AM - Stephen Capistron: save the assembly as a part file and then try it on everything at once?
May 21, 2015 7:24 AM - daniel871: I'm fiddling with the customzizer thing on Thingiverse for the emmet gears to make a starting STL file to import/convert right now. Don't know how well it'll work though.
May 21, 2015 7:27 AM - daniel871: Probably have to download it and run it through netfabb before importing it.
May 21, 2015 7:33 AM - jbigler1986: which emmet gears
May 21, 2015 7:33 AM - Stephen Capistron: the bearing thing you printed
May 21, 2015 7:33 AM - jbigler1986: ah
May 21, 2015 7:33 AM - Stephen Capistron: which worked pretty flawlessly
May 21, 2015 7:34 AM - jbigler1986: yes it did. came straight off the bed like that. add a little lubricant and it would probably be pretty amazing
May 21, 2015 7:35 AM - Stephen Capistron: well this comment is useless now
May 21, 2015 7:35 AM - jbigler1986: there. just saying lube doesn't sound right when referring to parts
May 21, 2015 7:38 AM - daniel871: I'll be glad when my stainless nozzles come in so I can experiment with the metal filaments more.
May 21, 2015 7:53 AM - Bill Monroe: http://www.ustream.tv/channel/bills-lab
May 21, 2015 7:58 AM - jbigler1986: what is that Bill
May 21, 2015 7:58 AM - Bill Monroe: couple of pulleys
May 21, 2015 7:58 AM - Bill Monroe: tried printing laying down.. though I'd try them on end
May 21, 2015 7:59 AM - Bill Monroe: edge
May 21, 2015 7:59 AM - Bill Monroe: might need a raft though... we'll see
May 21, 2015 8:00 AM - jbigler1986: feel good just printing and not messing with the printer doesn't it?
May 21, 2015 8:00 AM - Bill Monroe: dman right
May 21, 2015 8:00 AM - Bill Monroe: err
May 21, 2015 8:00 AM - Bill Monroe: damn right
May 21, 2015 8:01 AM - Bill Monroe: I just discovered I can changed the camera settings while it's running... i'm really liking this camera
May 21, 2015 8:02 AM - jbigler1986: it's good quality. what kind is it
May 21, 2015 8:05 AM - Bill Monroe: Ipevo
May 21, 2015 8:10 AM - jbigler1986: http://support.ipevo.com/support/qa/POV_USB_Camera
May 21, 2015 8:12 AM - Bill Monroe: this is the one I'm using: http://support.ipevo.com/support/qa/IPEVO_iZiggi-HD_Wireless_Document_Camera_for_iPad_PC_and_Mac
May 21, 2015 8:16 AM - Mike Kelly: hiya
May 21, 2015 8:18 AM - Mike Glass: hoya
May 21, 2015 8:19 AM - jbigler1986: hello
May 21, 2015 8:20 AM - Mike Kelly: how are things
May 21, 2015 8:22 AM - jbigler1986: no complaints here. gear turned out awesome and the dragon is looking good
May 21, 2015 8:22 AM - jbigler1986: u
May 21, 2015 8:24 AM - Mike Glass: http://imgur.com/UvxXvnI,NHcsNKa
May 21, 2015 8:25 AM - jbigler1986: nice MG
May 21, 2015 8:25 AM - Mike Kelly: nice mike, require a lot of support?

 

May 21, 2015 8:25 AM - jbigler1986: Did you see my vid of the gear
May 21, 2015 8:26 AM - Mike Glass: The first one I forgot, fail. this need support montly on the middle
May 21, 2015 8:26 AM - Mike Kelly: holy shit that bearing works well
May 21, 2015 8:26 AM - Mike Glass: http://imgur.com/LcOePBN
May 21, 2015 8:26 AM - Mike Glass: I printed a new bearing an its the bomb
May 21, 2015 8:27 AM - jbigler1986: gonna at some lubricant and see how long it will spin
May 21, 2015 8:27 AM - donhuevo: what'd you change?
May 21, 2015 8:27 AM - donhuevo: and good morning
May 21, 2015 8:27 AM - jbigler1986: i changed nothing. That was my first attempt
May 21, 2015 8:27 AM - daniel871: Haha, I forgot to print the Yes/No while printing upgrades for my printer last night
May 21, 2015 8:28 AM - donhuevo: I forgot to reprint the bearing last night
May 21, 2015 8:28 AM - daniel871: What's that round thing I see in some streams of the Robo on the Z-axis? Mine has this rectangular bracket with a nut in it.
May 21, 2015 8:29 AM - Mike Glass: Hey Don, I was stupid and choose start points on the model to be the same location, so one of the gears had build up.
May 21, 2015 8:29 AM - donhuevo: ah
May 21, 2015 8:29 AM - Mike Glass: new on is kick ass
May 21, 2015 8:29 AM - donhuevo: good to know. I'm pretty sure mine is set to pick random start points.
May 21, 2015 8:30 AM - Mike Glass: I slowed it down and it took 2hours 1 min
May 21, 2015 8:30 AM - jbigler1986: @Daniel this
May 21, 2015 8:31 AM - donhuevo: that's what I'll do... go slower
May 21, 2015 8:31 AM - daniel871: Yeah, that.
May 21, 2015 8:31 AM - daniel871: It's just to keep the Z-sensor from spinning out if it dips too far?
May 21, 2015 8:32 AM - jbigler1986: an adapter for the steppers with integrated threaded rods
May 21, 2015 8:32 AM - jbigler1986:
May 21, 2015 8:33 AM - daniel871: Not for the M8 threaded rods on the R1, or from some other mod?
May 21, 2015 8:33 AM - jbigler1986: other mod. as you can see there are no couplers
May 21, 2015 8:33 AM - donhuevo: he has linear steppers. threaded shaft
May 21, 2015 8:34 AM - Mike Glass: why dont you point him to the thread instead of posting it all here
May 21, 2015 8:34 AM - daniel871:
May 21, 2015 8:34 AM - jbigler1986: you have them to right don?
May 21, 2015 8:35 AM - donhuevo: I do but a completely different system for my z switches
May 21, 2015 8:35 AM - daniel871: Think I found it.
May 21, 2015 8:35 AM - daniel871: http://community.robo3d.com/index.p...more-couplers-instructions-not-finished.5083/
May 21, 2015 8:35 AM - jbigler1986: that's it
May 21, 2015 8:36 AM - jbigler1986: keep forgetting to finish it
May 21, 2015 8:36 AM - donhuevo:
May 21, 2015 8:37 AM - Mike Glass: Dual smooth rods..
May 21, 2015 8:37 AM - donhuevo: yeah buddy
May 21, 2015 8:37 AM - Mike Glass: I think thats what Toy is doing on his build
May 21, 2015 8:37 AM - donhuevo: cool.
May 21, 2015 8:37 AM - daniel871: Dual smooth rods and one threaded rod in the middle? For balance?
May 21, 2015 8:38 AM - Mike Glass: so he can support that big hotend
May 21, 2015 8:38 AM - donhuevo: more stable. much more massive bottom supports and I also added rods across the top
May 21, 2015 8:39 AM - donhuevo:
May 21, 2015 8:39 AM - Mike Glass: Don is a Uber modifier.
May 21, 2015 8:39 AM - daniel871: Bulking up for some heavy duty printing, eh?
May 21, 2015 8:40 AM - donhuevo: I just wanted as much stability as possible. Here's a mostly-accurate render... http://i.imgur.com/pJuwXe3.jpg
May 21, 2015 8:40 AM - jbigler1986: just more sturdy so more accurate prints and more consistency
May 21, 2015 8:41 AM - donhuevo: that's the hope.
May 21, 2015 8:41 AM - Mike Glass: now all you need is an aluminum plate.
May 21, 2015 8:41 AM - donhuevo: true
May 21, 2015 8:41 AM - Mike Kelly: do it don, do it
May 21, 2015 8:42 AM - donhuevo: it'll be the first thing I make on the cnc I haven't built yet. go wait in the car
May 21, 2015 8:42 AM - Mike Kelly: http://imgur.com/a/x1ntl
May 21, 2015 8:43 AM - donhuevo: all that work for a lamp shade
May 21, 2015 8:43 AM - jbigler1986:
May 21, 2015 8:43 AM - Mike Kelly: lol
May 21, 2015 8:45 AM - Mike Kelly: BIGREP
May 21, 2015 8:47 AM - jbigler1986: only one spool of filament. come on
May 21, 2015 8:47 AM - daniel871: Make something that big, put multiple extruders on it and have multiple filaments running.
May 21, 2015 8:48 AM - Mike Glass: The BAP is almost that size
May 21, 2015 8:48 AM - daniel871: I'm trying to remember how big the prospective R Mega is in comparison to that.
May 21, 2015 8:49 AM - donhuevo: not huge but cheap... http://www.amazon.com/CTC-Printer-E...F8&qid=1432223381&sr=8-12&keywords=3d+printer
May 21, 2015 8:50 AM - Mike Glass: just buy a refurb robo for cheap
May 21, 2015 8:52 AM - daniel871: Here's the R Mega, 39" cube print area. http://imgur.com/Q5y0efc
May 21, 2015 8:54 AM - Mike Kelly: i think it's down to 30" cubed
May 21, 2015 8:58 AM - Mike Glass: I thought it was 36"
May 21, 2015 8:59 AM - Mike Kelly: last time braydon said 30
May 21, 2015 8:59 AM - jbigler1986: don that looks interesting
May 21, 2015 8:59 AM - donhuevo: the customer reviews are hinky
May 21, 2015 9:01 AM - jbigler1986: yeah they are
May 21, 2015 9:01 AM - Mike Glass: too bad its not all metal
May 21, 2015 9:01 AM - Mike Kelly: i wouldn't buy a replicator clone that wasn't a flashforge
May 21, 2015 9:01 AM - donhuevo: try this... http://www.amazon.com/Assembled-Pri...F8&qid=1432223381&sr=8-14&keywords=3d+printer
May 21, 2015 9:02 AM - jbigler1986: also reviews lol. just say like 8 on the 19th. fail
May 21, 2015 9:02 AM - jbigler1986: had an up mini
May 21, 2015 9:10 AM - Mike Glass: ok I did not know you could powder coat MDF..
May 21, 2015 9:11 AM - donhuevo: yup. A lot of that mdf furniture is powder coated. Makes for a really pretty finish
May 21, 2015 9:12 AM - donhuevo: so I'm thinking about popping the 1.2.6 slic3r engine into repetier tonight and trying that with the bearing
May 21, 2015 9:13 AM - Mike Glass: ABS?
May 21, 2015 9:13 AM - donhuevo: no
May 21, 2015 9:13 AM - donhuevo: NO
May 21, 2015 9:13 AM - donhuevo: N O
May 21, 2015 9:13 AM - jbigler1986: lol. he hates abs just like i do
May 21, 2015 9:14 AM - Mike Glass: No, you just dont know how to use it..
May 21, 2015 9:14 AM - daniel871: Lots of ventilation?
May 21, 2015 9:14 AM - jbigler1986: opposite
May 21, 2015 9:14 AM - Mike Glass: screw that
May 21, 2015 9:14 AM - donhuevo: I have a plan to eventually build a 3d printer inside a wine cooler fridge so I can keep it heated
May 21, 2015 9:15 AM - Mike Glass: That is the best high
May 21, 2015 9:15 AM - donhuevo: then maybe
May 21, 2015 9:15 AM - daniel871: Okay, print in a room you don't care about and ventilate after finished?
May 21, 2015 9:15 AM - donhuevo: There are so many better alternatives out there
May 21, 2015 9:15 AM - Mike Glass: I print abs in my office, no vents
May 21, 2015 9:15 AM - jbigler1986: you get use to the fumes
May 21, 2015 9:15 AM - donhuevo: does work turn into a Cheech and Chong movie?
May 21, 2015 9:16 AM - daniel871: Anybody tried Formfutura's Clearscent ABS?
May 21, 2015 9:16 AM - jbigler1986: the smell isn't why i hate it
May 21, 2015 9:16 AM - Mike Glass: Chinese abs is the best, as you now there will be no toxins in it.
May 21, 2015 9:16 AM - jbigler1986: MG if that's the case then you just don't know how to use XT.
May 21, 2015 9:17 AM - donhuevo: only the stuff manufactured by three-armed people though.

 

May 21, 2015 9:17 AM - Mike Glass: I can use it, I dont want to spend my life just printing one small part at 5mm/s
May 21, 2015 9:18 AM - jbigler1986: 1 week for a cabinet knob. sure
May 21, 2015 9:18 AM - Mike Glass: Remember I did print the Mini Robo with XT
May 21, 2015 9:19 AM - donhuevo: what's the other stuff like XT?
May 21, 2015 9:19 AM - Mike Glass: or and the tool holder
May 21, 2015 9:19 AM - Mike Glass: PETG?
May 21, 2015 9:19 AM - donhuevo: PET+
May 21, 2015 9:20 AM - donhuevo: I've had good luck with that
May 21, 2015 9:20 AM - Mike Kelly: people really like PET
May 21, 2015 9:20 AM - daniel871: PET+ has been the best stuff for me so far.
May 21, 2015 9:20 AM - donhuevo: It's my choice for an ABfnS replacement
May 21, 2015 9:21 AM - Mike Kelly: it's definitely good at that
May 21, 2015 9:21 AM - daniel871: No bed prep of any kind, print it hot.
May 21, 2015 9:21 AM - Mike Kelly: not quite as high of a glass transition but still a lot of similar characteristic
May 21, 2015 9:21 AM - Stephen Capistron: I find the generic PETG to not be very good at details or bridging (no fan shrouds), but it is awesome for anything structural
May 21, 2015 9:22 AM - daniel871: Anyway, here is the supposed no-fumes ABS. http://www.formfutura.com/clearscent/
May 21, 2015 9:22 AM - Stephen Capistron: instead of scented toxic fumes, they are odorless toxic fumes
May 21, 2015 9:22 AM - daniel871: Probably.
May 21, 2015 9:23 AM - daniel871: I don't know. "Our ClearScent™ ABS does not contain any hazardous, or chemical substances. In fact, all our ClearScent™ ABS filaments are RoHS certified, REACH compliant and even are FDA food and drink contact approved."
May 21, 2015 9:24 AM - daniel871: But is it dishwasher safe?
May 21, 2015 9:27 AM - Mike Kelly: ABS has a glass transition of like 105C
May 21, 2015 9:29 AM - Stephen Capistron: Doesn't Rohs just mean a lack of heavy metals, namely lead
May 21, 2015 9:29 AM - daniel871: Should eliminate the chinese lead product fear, then!
May 21, 2015 9:30 AM - jbigler1986: they just put another cancerous material in it
May 21, 2015 9:30 AM - Stephen Capistron: just because they say it doesn't have lead, does not in fact mean there is no lead
May 21, 2015 9:31 AM - daniel871: Shrodinger's Carcinogen?
May 21, 2015 9:31 AM - Stephen Capistron: A long while back a company I worked for thought they'd try a new supplier for titanium. Thankfully our QC people were properly paranoid and sent a sample out for testing and it was not up to snuff. Turns out the supplier was a reseller of chinese material. we went back to the more expensive, but known supplier
May 21, 2015 9:32 AM - jbigler1986: cheaper is rarely better
May 21, 2015 9:32 AM - Stephen Capistron: like everything is labeled as "known to cause cancer in the state of california" unless they have test data that states otherwise.
May 21, 2015 9:34 AM - donhuevo: wondering now if the state of California itself is known to cause cancer
May 21, 2015 9:34 AM - daniel871: Yes.
May 21, 2015 9:34 AM - daniel871: Though they probably blame it on the Fukushima disaster now.
May 21, 2015 9:34 AM - daniel871: (which is bullshit, but whatever)
May 21, 2015 9:35 AM - Stephen Capistron: have you ever flown into LA? it is disgusting. You can see the brown smog just hanging in the air.
May 21, 2015 9:36 AM - daniel871: How is that different from Atlanta, where you can see it just on the morning commute?
May 21, 2015 9:36 AM - donhuevo: oooh.. http://www.amazon.com/0-4mm-MakerBo...sim_328_6?ie=UTF8&refRID=0R0FPV1DZ2R78Y5AHG7N
May 21, 2015 9:36 AM - JeffTheMess: Hello Hello Hello there
May 21, 2015 9:37 AM - daniel871: Love the reviews on that one, don.
May 21, 2015 9:37 AM - daniel871: "Managed to work, but I think I broke it when I tossed it back into the box"
May 21, 2015 9:37 AM - Mike Glass: Hey Jeff
May 21, 2015 9:38 AM - JeffTheMess: You guys missed the mess? ofcourse you did.....how are we today
May 21, 2015 9:39 AM - donhuevo: ok... how about this... http://www.amazon.com/Hatchbox-1-75...sim_328_6?ie=UTF8&refRID=1AJTJXKG5KX9ZRRGKSAG
May 21, 2015 9:40 AM - Mike Glass: ok don if that was abs
May 21, 2015 9:40 AM - donhuevo: haha
May 21, 2015 9:41 AM - daniel871: http://www.amazon.com/HATCHBOX-1-75...id=1432226502&sr=8-1&keywords=1.75mm+filament
May 21, 2015 9:41 AM - donhuevo: I bought two
May 21, 2015 9:42 AM - daniel871: Hahaha. http://www.amazon.com/dp/B00S4H3I4Q?psc=1
May 21, 2015 9:42 AM - jbigler1986: hatchbox pla is awesome
May 21, 2015 9:42 AM - donhuevo: and cheap
May 21, 2015 9:42 AM - Mike Glass: I like hatchbox, but really like the JUSTpla brand
May 21, 2015 9:42 AM - daniel871: I like the all caps stuff on that last one.
May 21, 2015 9:42 AM - JeffTheMess: Hatchbox is great
May 21, 2015 9:43 AM - Mike Glass: You should try the JustPla, they have some great colors and transparents
May 21, 2015 9:44 AM - Mike Glass: although I do run them at 215, but they stick to the bed like crazy, they wont pop off until the bed is 35c
May 21, 2015 9:50 AM - jbigler1986: they are also like $29
May 21, 2015 9:50 AM - jbigler1986: i do like some of the colors they offer though
May 21, 2015 9:53 AM - Mike Glass: I only paid $29 for one most the time they are $23
May 21, 2015 9:54 AM - donhuevo: I was paying 31 a roll for MatterHackers.
May 21, 2015 9:54 AM - Mike Kelly: i still can't believe how much filament prices dropped in a year
May 21, 2015 9:55 AM - Mike Glass: http://www.amazon.com/justpla-Chrom...e=UTF8&qid=1432227333&sr=8-7&keywords=justpla actually cheaper now
May 21, 2015 9:55 AM - Mike Glass: same as hatchbox
May 21, 2015 9:55 AM - Mike Kelly: ugh crap i can't think of anything to work on
May 21, 2015 9:57 AM - jbigler1986: i was looking on their site. didn't look them up on amazon. thx
May 21, 2015 9:58 AM - Stephen Capistron: any carl's jr fans? http://www.csmonitor.com/Business/T...t-American-Thickburger-breaks-5-price-ceiling
May 21, 2015 9:59 AM - jbigler1986: that looks gross
May 21, 2015 9:59 AM - Mike Glass: I bought on from them on thier website, they do ship fast.
May 21, 2015 10:00 AM - Mike Kelly: that gold they have looks nice
May 21, 2015 10:00 AM - Mike Kelly: they also have translucent black
May 21, 2015 10:01 AM - jbigler1986: oh really
May 21, 2015 10:01 AM - Mike Glass: haha 1000 calories for that burger,, holy crap
May 21, 2015 10:01 AM - Mike Kelly: http://www.amazon.com/dp/B00M1DQV34...TF8&colid=3A0HJY1JXP56I&coliid=I1BYGI0P8O7JU4
May 21, 2015 10:02 AM - Mike Kelly: i love me some carls
May 21, 2015 10:02 AM - jbigler1986: it's hardees here. same thing though
May 21, 2015 10:02 AM - Mike Glass: what would you use that black on?
May 21, 2015 10:02 AM - Mike Glass: yea we just have hardees
May 21, 2015 10:02 AM - jbigler1986: lots of stuff
May 21, 2015 10:02 AM - Stephen Capistron: we have neither
May 21, 2015 10:02 AM - Mike Kelly: a ghost? i dunno
May 21, 2015 10:03 AM - jbigler1986: have you seen a print with it?
May 21, 2015 10:03 AM - Mike Glass: dont you live in the boonies?
May 21, 2015 10:03 AM - Stephen Capistron: boston
May 21, 2015 10:03 AM - Mike Glass: thats what I meant
May 21, 2015 10:03 AM - jbigler1986: MK what was that guys name where i saw that translucent black
May 21, 2015 10:05 AM - Mike Kelly: walter
May 21, 2015 10:06 AM - daniel871: Was that the burger that had a hotdog and chips on it?
May 21, 2015 10:06 AM - daniel871: Saw a big poster on a Hardee's about it on the way to work and almost wrecked laughing at it.
May 21, 2015 10:07 AM - daniel871: Helps if I click links, but I've been goatse'd too many times to trust random urls.
May 21, 2015 10:07 AM - jbigler1986: https://www.thingiverse.com/make:115536
May 21, 2015 10:08 AM - jbigler1986: transparent black. awesome
May 21, 2015 10:08 AM - Mike Glass: you have to be carefull here as there are a bunch of hackers here
May 21, 2015 10:08 AM - daniel871: Yeah, I'm going to get some of that PLA.
May 21, 2015 10:09 AM - Mike Glass: 14 left better hurry guys
May 21, 2015 10:11 AM - Mike Glass: http://www.amazon.com/justpla-Chrom...=UTF8&qid=1432228268&sr=1-24&keywords=JustPla here is that cinnamon I got, really like it
May 21, 2015 10:11 AM - jbigler1986: i could have it tomorrow. hmmm
May 21, 2015 10:11 AM - Mike Kelly: what did you print the dragon in
May 21, 2015 10:12 AM - jbigler1986: me?
May 21, 2015 10:12 AM - daniel871: I'll have to wait to order it until after the weekend. Won't be home to take deliveries.
May 21, 2015 10:12 AM - daniel871: And I'm leery about letting boxes sit out in the sun.
May 21, 2015 10:13 AM - Mike Glass: sun is good for filament, dries it out
May 21, 2015 10:13 AM - Mike Glass: I printed all my dragons with all the JUSTpla colors I had

 

May 21, 2015 10:14 AM - Mike Kelly: also embrittles it
May 21, 2015 10:14 AM - Mike Glass: except gray
May 21, 2015 10:14 AM - Mike Kelly: i need more colors in PLA
May 21, 2015 10:14 AM - Mike Kelly: i only have neutrals
May 21, 2015 10:14 AM - Mike Kelly: and that translucent orange/red i have from robo
May 21, 2015 10:15 AM - jbigler1986: i printed it in the same color as the gear. the lighting makes it look weird
May 21, 2015 10:15 AM - Mike Kelly: https://plus.google.com/u/1/117180320763045071687/posts/X9AmFJd2tkZ?cfem=1 this is my kind of color scheme
May 21, 2015 10:16 AM - daniel871: What is PLA really good for mechanically? Or is it just messing around filament?
May 21, 2015 10:17 AM - daniel871: Model/artistic prints?
May 21, 2015 10:17 AM - Mike Kelly: i find PLA better for fine detail yes
May 21, 2015 10:17 AM - Mike Kelly: abs is finicky when you get small
May 21, 2015 10:17 AM - jbigler1986: lots of stuff that won't see heat
May 21, 2015 10:18 AM - Mike Glass: I find abs works better for smaller parts, but I run a fan on smaller parts..
May 21, 2015 10:18 AM - Mike Kelly: yeah i need to do that i suppose
May 21, 2015 10:18 AM - Mike Kelly: i just worry about layer delamination
May 21, 2015 10:18 AM - daniel871: Fine, I ordered some cinnamon and smoke black. Hope you're happy.
May 21, 2015 10:18 AM - Mike Glass: like my ducatti foot pegs and shifters came out awesome
May 21, 2015 10:19 AM - daniel871: I read that F as a T for a second there.
May 21, 2015 10:21 AM - Mike Kelly: crap i'm getting listless
May 21, 2015 10:21 AM - Mike Glass: man that is a work of art, I want one
May 21, 2015 10:21 AM - jbigler1986: http://www.ustream.tv/channel/jbigler1986 looks good from i can see
May 21, 2015 10:22 AM - Mike Glass: Eustathios ninja edition..lol
May 21, 2015 10:22 AM - Mike Kelly: right?
May 21, 2015 10:22 AM - Mike Kelly: jb you need a wide angle
May 21, 2015 10:22 AM - jbigler1986: that i do
May 21, 2015 10:23 AM - jbigler1986: probably gonna do that samsung wifi one soon
May 21, 2015 10:24 AM - Mike Kelly: https://plus.google.com/u/1/112024085862291344951/posts/F8sJ42c8DGd fun
May 21, 2015 10:26 AM - jbigler1986: nice
May 21, 2015 10:26 AM - Mike Kelly: this is also interesting: http://intentional3d.com/teardown-of-the-makerbot-5th-gen-replicator-smart-extruder/
May 21, 2015 10:26 AM - jbigler1986: no robo member again? wth
May 21, 2015 10:27 AM - Mike Kelly: it's still a bit early for that
May 21, 2015 10:28 AM - jbigler1986: true
May 21, 2015 10:29 AM - donhuevo: so Cura is stupid when it comes to bridging.
May 21, 2015 10:29 AM - Mike Kelly: yeah i dislike cura's bridges
May 21, 2015 10:29 AM - Mike Kelly: also braydon was at BSA yesterday so i doubt he's back
May 21, 2015 10:30 AM - donhuevo: that's why I'm ready to try the slic3r engine again
May 21, 2015 10:31 AM - jbigler1986: fancy extruder there
May 21, 2015 10:34 AM - jbigler1986: they are like $180. saw one at frys
May 21, 2015 10:36 AM - Mike Kelly: yeah they're pricey
May 21, 2015 10:36 AM - Mike Kelly: i think they drop 75 if you exchange the old one but still
May 21, 2015 10:37 AM - jbigler1986: waiting on an email from Braydon before i pull the trigger
May 21, 2015 10:49 AM - Mike Kelly: no braydon today, he's in hotlanta
May 21, 2015 10:49 AM - Mike Kelly: you should go say hi daniel
May 21, 2015 10:52 AM - Mike Kelly: watching a video on a hand made chair, and he cuts the seat shape with a band saw
May 21, 2015 10:52 AM - Mike Kelly: wait what
May 21, 2015 10:54 AM - Mike Kelly: oh now he's carving the seat indent with an angle grinder
May 21, 2015 10:59 AM - donhuevo: the butt dip?
May 21, 2015 11:00 AM - Mike Kelly: uh sure
May 21, 2015 11:02 AM - donhuevo: so I finally got around to watching Fitty Shade. It mostly sucked.
May 21, 2015 11:02 AM - donhuevo: not in the good way
May 21, 2015 11:03 AM - Mike Kelly: just looks dumb to me
May 21, 2015 11:03 AM - donhuevo: I'm ranking it right down there with Hot Tub Time Machine 2
May 21, 2015 11:05 AM - Mike Kelly: haha my friends were just saying we should watch that
May 21, 2015 11:05 AM - donhuevo: don't know if you remember how disappointed you were with Caddyshack 2 but it's on par
May 21, 2015 11:12 AM - Mike Glass: Mike is that Sam Maloof
May 21, 2015 11:13 AM - Mike Kelly: lol no
May 21, 2015 11:13 AM - Mike Kelly:
May 21, 2015 11:15 AM - Stephen Capistron: that little halls effect sensor to tell if filament is actually being fed is nice
May 21, 2015 11:15 AM - Mike Kelly: the rotary wheel?
May 21, 2015 11:16 AM - Stephen Capistron: yeah
May 21, 2015 11:16 AM - Mike Kelly: agreed
May 21, 2015 11:17 AM - Stephen Capistron: that could double as an "out of filament" switch too
May 21, 2015 11:18 AM - jbigler1986: wonder if we could design one into a filament guide or oiler?
May 21, 2015 11:19 AM - Stephen Capistron: the hard part is the coding around retractions and non-extruding print movements
May 21, 2015 11:21 AM - jbigler1986: wonder if there could be a certain amount of time you could code it for. so like if it's activated for like 3 seconds then it stops the print or something along those lines
May 21, 2015 11:23 AM - jbigler1986: MK did you and mike find a stepper wire extension cable on amazon
May 21, 2015 11:27 AM - Mike Glass: wasnt on amazon, ti was from cananada
May 21, 2015 11:27 AM - jbigler1986: was just wondering if you guys found one on ther
May 21, 2015 11:28 AM - Mike Glass: Mike, the way he made dowels was amazing, never seen that before.
May 21, 2015 11:32 AM - Mike Kelly: yeah that was cool
May 21, 2015 11:37 AM - Mike Kelly: https://imgur.com/a/i2MIm nice table
May 21, 2015 11:38 AM - jbigler1986: ugly chair but nice work though
May 21, 2015 11:40 AM - Stephen Capistron: 30 minutes. TLDW
May 21, 2015 11:43 AM - Mike Kelly: hey i read that netflix article!
May 21, 2015 11:43 AM - Mike Glass: anybody watch Lettermans last show
May 21, 2015 11:43 AM - Mike Kelly: nope was it good
May 21, 2015 11:43 AM - Stephen Capistron: not yet. got it DVRd
May 21, 2015 11:44 AM - Mike Glass: yea it was pretty funny
May 21, 2015 11:44 AM - Mike Kelly: open zip ties from the middle to keep them in the pack: http://i.imgur.com/gVggViw.jpg
May 21, 2015 11:44 AM - Mike Glass: lot of celebs on the top 10
May 21, 2015 11:45 AM - Mike Glass: is there any other way?
May 21, 2015 11:45 AM - Mike Kelly: well aren't you all smart for knowing that
May 21, 2015 11:46 AM - Stephen Capistron: ah, tear the bag open and dump them out
May 21, 2015 11:46 AM - Stephen Capistron: take what you need like playing pick up sticks
May 21, 2015 11:47 AM - Mike Glass: I take one of the ties and tie it around the remaining also in my toolbag.
May 21, 2015 11:48 AM - Stephen Capistron: on a more serious note i've used elastics
May 21, 2015 11:48 AM - Stephen Capistron: But the good silicone ones
May 21, 2015 11:48 AM - Stephen Capistron: http://www.amazon.com/Architec-Stre...id=1432234162&sr=1-3&keywords=cooking+elastic
May 21, 2015 11:48 AM - Stephen Capistron: They don't dry out and stuff
May 21, 2015 11:49 AM - jbigler1986: zip loc bag here
May 21, 2015 11:50 AM - Mike Kelly: didn't know those existed
May 21, 2015 11:56 AM - toy: bondtechs working mk?
May 21, 2015 11:57 AM - Mike Kelly: got the printer mostly working last night
May 21, 2015 11:57 AM - Mike Kelly: about to go try and level the nozzles
May 21, 2015 11:57 AM - jbigler1986: until it exploded
May 21, 2015 11:58 AM - toy: does the floating shaft move back and forth in the slot freely? for the tension
May 21, 2015 12:10 PM - jbigler1986: time to start looking for a house to rent. about to sell ours
May 21, 2015 12:11 PM - jbigler1986: oh yeah
May 21, 2015 12:15 PM - jbigler1986: https://myminifactory.com/object/ultron-fully-wearable-mask-6899 this is cool
May 21, 2015 12:18 PM - daniel871: Made about 30% as cool if anybody other than James Spader is wearing it.

 

May 21, 2015 12:19 PM - daniel871: "Oh, for god's sake!" got a lot of laughs when I saw the movie.
May 21, 2015 12:30 PM - Stephen Capistron: I hope the sale / move is for good reasons
May 21, 2015 12:31 PM - Stephen Capistron: And when you look for the rental you make sure your robo has its own room
May 21, 2015 12:32 PM - jbigler1986: it is for good reasons
May 21, 2015 12:33 PM - jbigler1986: yeah i will be getting my own "work" space when we buy a new house
May 21, 2015 12:33 PM - donhuevo: way cooler than the chair
May 21, 2015 12:34 PM - Stephen Capistron: that opening makes me think of junkyard wars
May 21, 2015 12:34 PM - Stephen Capistron: man that was a great show
May 21, 2015 12:37 PM - Stephen Capistron: is there no talking in these handmade videos
May 21, 2015 12:37 PM - donhuevo: only your inner dialogue
May 21, 2015 12:38 PM - donhuevo: 'nice knife'...'boobs'...'I'm hungry'...'boobs'
May 21, 2015 12:38 PM - Stephen Capistron: there is a lot of that. It is distracting too
May 21, 2015 12:38 PM - Stephen Capistron: only thing missing from your list is scotch and beer
May 21, 2015 12:38 PM - donhuevo: haha
May 21, 2015 12:39 PM - Stephen Capistron: is there a way to watch a youtube video backwards? I think these might work better that way
May 21, 2015 12:40 PM - donhuevo: boob spelled backward
May 21, 2015 12:42 PM - Stephen Capistron: MK what were your thoughts on netflix HR
May 21, 2015 12:45 PM - Mike Kelly: http://m.ustream.tv/channel/ride-along-my-robo-3d
May 21, 2015 12:47 PM - Stephen Capistron: hungry? http://www.csmonitor.com/Technology/2015/0520/How-mCookie-s-DIY-computer-tech-brings-Legos-to-life
May 21, 2015 12:48 PM - Mike Kelly: i thought it was interesting
May 21, 2015 12:48 PM - Stephen Capistron: would be a weird place to work if you are not self aware
May 21, 2015 12:50 PM - Mike Kelly: yeah
May 21, 2015 12:50 PM - Mike Kelly: man simplify3d was way off on this time estimate
May 21, 2015 12:50 PM - Mike Kelly: i started the print around 9pm last night
May 21, 2015 12:50 PM - Mike Kelly: said 13hours and 14 minutes for the est
May 21, 2015 12:50 PM - jbigler1986: lol. watching ur stream and the front nozzle was in front on the part. i was like wtf. then realized you had dual. forgot for a minute
May 21, 2015 12:50 PM - Mike Kelly: yeahhh it's only 86% done
May 21, 2015 12:50 PM - jbigler1986: facepalm
May 21, 2015 12:51 PM - Mike Kelly: heh
May 21, 2015 12:51 PM - Mike Kelly: should have focused it a bit more
May 21, 2015 12:52 PM - jbigler1986: no like it was printing in the middle of nowhere bc the other nozzle was printing
May 21, 2015 12:52 PM - Mike Kelly: yeah i knew what you meant that was a tangent
May 21, 2015 12:52 PM - jbigler1986: ahh. i'm out of it today
May 21, 2015 12:52 PM - Mike Kelly: and it's done
May 21, 2015 12:53 PM - jbigler1986: cura?
May 21, 2015 12:53 PM - Mike Kelly: yup
May 21, 2015 12:53 PM - Mike Kelly: but yeah, bondtechs work
May 21, 2015 12:53 PM - Mike Kelly: need to try and push them a bit more
May 21, 2015 12:53 PM - jbigler1986: can always tell by the bed movement afterwards
May 21, 2015 12:54 PM - Stephen Capistron: i finally changed my end Gcode so it pushes the bed to the front.
May 21, 2015 12:55 PM - Mike Glass: doesnt repetier do that by default?
May 21, 2015 12:56 PM - jbigler1986: I think it's just curas end gcode
May 21, 2015 12:56 PM - Mike Glass: do you think glass from a scanner would work for a print bed?
May 21, 2015 12:57 PM - daniel871: S3D seems to just leave the bed where it is and send the extruder to X-zero.
May 21, 2015 12:57 PM - Mike Kelly: that was printed at 90mm/s
May 21, 2015 12:57 PM - Mike Kelly: i'd assume a scanner uses borosilicate because of the heat from the lamp
May 21, 2015 12:58 PM - Mike Glass: really? its really old
May 21, 2015 12:58 PM - Mike Kelly: borosilicate isn't exactly new
May 21, 2015 12:59 PM - Mike Kelly: but i mean pretty much any glass will work
May 21, 2015 12:59 PM - Stephen Capistron: hit it with a hammer. if it breaks it is borosilicate
May 21, 2015 12:59 PM - Mike Kelly: so i had this pane of tempered glass i got dumpster diving
May 21, 2015 12:59 PM - Mike Glass: just tired of my bed chipping out.
May 21, 2015 1:00 PM - Mike Kelly: realizing i can never cut it i decided i'd break it in my trash
May 21, 2015 1:00 PM - Mike Kelly: yeah definitely got like 10% in the trash
May 21, 2015 1:00 PM - Mike Kelly: was fun to watch it shatter though
May 21, 2015 1:03 PM - jbigler1986: when was this
May 21, 2015 1:04 PM - jbigler1986: you keep chipping your bed MG?
May 21, 2015 1:04 PM - Mike Kelly: saturday
May 21, 2015 1:04 PM - jbigler1986: lol
May 21, 2015 1:05 PM - Mike Kelly: Glass has a lot of glass issues
May 21, 2015 1:05 PM - Mike Glass: yea have 2 dents now
May 21, 2015 1:05 PM - daniel871: Shame there isn't a way to use the bed and X-axis rods to push a print off of the bed after a timer that allows the part to cool.
May 21, 2015 1:05 PM - daniel871: Probably break everything doing it though.
May 21, 2015 1:06 PM - Mike Kelly: that's easy
May 21, 2015 1:06 PM - Mike Glass: score this scanner has 10mm solid rods
May 21, 2015 1:06 PM - Mike Kelly:
May 21, 2015 1:06 PM - Mike Kelly: jesus how big of a scanner is this
May 21, 2015 1:07 PM - daniel871: X-home, Y move to extent, wait for cooling time, Z-home, then Z+5 to 10mm, Y-home. Boom, everything broken.
May 21, 2015 1:07 PM - Mike Glass: its an old hp scanner 8.5x11.5
May 21, 2015 1:08 PM - Mike Kelly: you could also just send an M109 S35 to have it wait until the extruder is at 35
May 21, 2015 1:08 PM - Mike Glass: got a nice stepper motor also
May 21, 2015 1:08 PM - Mike Kelly: sweet
May 21, 2015 1:08 PM - Mike Kelly: i need to break apart some old printers in my house
May 21, 2015 1:10 PM - Mike Glass: looks like the belt is gt2 also
May 21, 2015 1:10 PM - Mike Kelly: must be super old then
May 21, 2015 1:11 PM - jbigler1986: can get a new bed with all the wires from robo for cheap
May 21, 2015 1:11 PM - Mike Glass: 2001 maybe?
May 21, 2015 1:12 PM - Mike Kelly: hmm ok then
May 21, 2015 1:12 PM - jbigler1986: but i like your route. free is even better
May 21, 2015 1:12 PM - Mike Glass: lol amazon still has them.. http://www.amazon.com/HP-ScanJet-5470C-Flatbed-parallel/dp/B00066H2HW
May 21, 2015 1:13 PM - Mike Glass: wtf
May 21, 2015 1:13 PM - daniel871: Screw $400 though.
May 21, 2015 1:13 PM - jbigler1986: haha. $400
May 21, 2015 1:13 PM - daniel871: ^$399.99
May 21, 2015 1:13 PM - daniel871: Welp
May 21, 2015 1:13 PM - Mike Glass: hmm maybe I should put back together and sell it..
May 21, 2015 1:14 PM - daniel871: Yeah, do that.
May 21, 2015 1:14 PM - Mike Glass: problem is it is only supported on no higher than xp
May 21, 2015 1:14 PM - daniel871: There are still people out there spending inordinate amounts of money avoiding upgrading to Windows 7.
May 21, 2015 1:15 PM - daniel871: Hey, remember Windows ME?
May 21, 2015 1:15 PM - Mike Glass: $30 on ebay, thats better..lol
May 21, 2015 1:15 PM - daniel871: BSoD every other system boot?
May 21, 2015 1:16 PM - Mike Glass: oh lot of 3 for $28 hmm parts for the BAP
May 21, 2015 1:17 PM - daniel871: BAP?
May 21, 2015 1:17 PM - Mike Kelly: his big ass printer
May 21, 2015 1:18 PM - daniel871: Okay.
May 21, 2015 1:18 PM - daniel871: Googled it and got some band out of South Korea.
May 21, 2015 1:18 PM - daniel871:
May 21, 2015 1:18 PM - Mike Glass: thats where I sell them
May 21, 2015 1:22 PM - jbigler1986: windows 7 is awesome

 

May 21, 2015 1:23 PM - jbigler1986: only way i would use xp is if i had a crap computer
May 21, 2015 1:23 PM - jbigler1986: oh yeah windows ME and Deer hunter
May 21, 2015 1:23 PM - Mike Kelly: that's a tiny stepper mike
May 21, 2015 1:24 PM - Mike Glass:
May 21, 2015 1:24 PM - Mike Glass: 19" on the rod
May 21, 2015 1:25 PM - Mike Glass: isnt that stepper so cute though
May 21, 2015 1:26 PM - Mike Glass: belt is a little skinnier
May 21, 2015 1:32 PM - Mike Kelly: yeah that stepper is adorable
May 21, 2015 1:43 PM - jbigler1986: time for a useless machine
May 21, 2015 1:44 PM - Mike Glass: does borcilicate glass explode or just crack?
May 21, 2015 1:45 PM - Stephen Capistron: depends on what you do to it
May 21, 2015 1:45 PM - Stephen Capistron:
May 21, 2015 1:45 PM - Mike Kelly: crack
May 21, 2015 1:46 PM - Mike Glass: this stuff is glued in pretty good, heating it with a hot air gun
May 21, 2015 1:46 PM - Mike Kelly: https://www.3dhubs.com/talk/thread/bronzefill-patina-processing the hell is underwater hockey
May 21, 2015 1:46 PM - Stephen Capistron: if only it were hot glued in place
May 21, 2015 1:47 PM - Mike Kelly: apparently it's some sort of scuba game
May 21, 2015 1:48 PM - daniel871: I prefer underwater poker.
May 21, 2015 1:48 PM - daniel871: The card game, not the euphemism.
May 21, 2015 1:48 PM - Mike Kelly: or snorkel
May 21, 2015 1:49 PM - jbigler1986:
May 21, 2015 1:50 PM - Mike Kelly: wow that thing really shot up to speed
May 21, 2015 1:51 PM - Mike Glass: is that witch craft?
May 21, 2015 1:52 PM - daniel871: Nah.
May 21, 2015 2:22 PM - TechSupportGo: hello
May 21, 2015 2:23 PM - Mike Kelly: hi
May 21, 2015 2:27 PM - TechSupportGo: I should have orinted from the card lol
May 21, 2015 2:27 PM - Mike Glass: yo tech
May 21, 2015 2:27 PM - TechSupportGo: printed
May 21, 2015 2:28 PM - Mike Glass: what happened
May 21, 2015 2:29 PM - TechSupportGo: to much lag
May 21, 2015 2:38 PM - TechSupportGo: cant even use my video editer
May 21, 2015 2:38 PM - TechSupportGo: editor
May 21, 2015 2:44 PM - jbigler1986: Ready for it MG
May 21, 2015 2:45 PM - jbigler1986:
May 21, 2015 2:46 PM - Mike Kelly: kinda hate you JB
May 21, 2015 2:47 PM - Mike Kelly: very nice print
May 21, 2015 2:47 PM - Mike Glass: nice
May 21, 2015 2:50 PM - jbigler1986: OK no more dragons. Lol
May 21, 2015 2:50 PM - Mike Glass:
May 21, 2015 2:51 PM - Mike Glass: come on just one more
May 21, 2015 2:53 PM - Mike Glass: lets see the better dragon one you did
May 21, 2015 2:55 PM - Mike Kelly: i need to set my printer back up for PLA then give one a try
May 21, 2015 2:55 PM - Mike Glass: dont you just change temps?
May 21, 2015 2:56 PM - jbigler1986: That one was crap due to the size, support was a mess and speed was way to fast. I could try it with s3d but not for a few days. Gotta print some stuff for work
May 21, 2015 2:56 PM - Droid: my extruder jammed last night, 11 hours into a 15 hour print
May 21, 2015 2:58 PM - jbigler1986: Reason?
May 21, 2015 2:59 PM - Droid: wish I knew, got home this afternoon and fired it up to see if it was clogged and had no issues
May 21, 2015 3:00 PM - Mike Glass: holy hell that was a big piece
May 21, 2015 3:01 PM - Droid: only thing i can think of is there is a little hangup in the hotend right at the heat break and maybe the filament snapped in the ptfe tube and couldnt push past the heatbreak
May 21, 2015 3:03 PM - Mike Glass: that sucks Droid, specially on a long print.
May 21, 2015 3:07 PM - Droid: im attempting to print the portion that didnt print and Ill just glue it together, got a pretty good measurement of what layer it stopped at
May 21, 2015 3:08 PM - Mike Glass: ive dont that before, it had really bad retraction on the top of the model, so sliced it in netfabb and glued, cant even tell.
May 21, 2015 3:08 PM - Mike Kelly: http://www.popularmechanics.com/technology/gear/a15603/super-efficient-greaseless-bearings/
May 21, 2015 3:09 PM - Mike Kelly: PLA?
May 21, 2015 3:10 PM - Droid: ABS
May 21, 2015 3:10 PM - Droid:
May 21, 2015 3:13 PM - Mike Kelly: bummer
May 21, 2015 3:13 PM - Droid: does those couple stabilizers work good Mike?
May 21, 2015 3:13 PM - Mike Glass: just for looks I think..lol
May 21, 2015 3:13 PM - Droid: I had a issue with the same rod you have that one on, somehow it dissapeared on its own though
May 21, 2015 3:14 PM - Mike Glass: Mine threaded rods are super glued with tinfoil for fill.
May 21, 2015 3:16 PM - Droid: my next upgrade will probably be lead screws, thinking 4mm pitch
May 21, 2015 3:19 PM - Mike Kelly: i hope robo releases their upgrade
May 21, 2015 3:19 PM - Mike Glass: That would be nice, but probably not a reality
May 21, 2015 3:20 PM - Mike Glass: about to route my grooves for t-slot
May 21, 2015 3:20 PM - Mike Kelly: yeah i bugged him today
May 21, 2015 3:20 PM - Mike Kelly: nice mike
May 21, 2015 3:20 PM - Mike Kelly: post pics
May 21, 2015 3:21 PM - Mike Glass: I have extra too, so can use those for jigs
May 21, 2015 3:21 PM - Droid: I was there today, shoulda asked them, they are doing print services now and all those printers they upgraded to lead screws.
May 21, 2015 3:21 PM - Mike Glass: all of them?
May 21, 2015 3:21 PM - Mike Kelly: he said he was gonna email mike p about ordering them
May 21, 2015 3:23 PM - Mike Kelly:
May 21, 2015 3:28 PM - Droid: just about every printer the have that they are printing with have the lead screws or are going to get them.
May 21, 2015 3:30 PM - Droid: I just emailed Konrad about ordering them, I know a few of their employees just left, and I wanna say Mike was one of them.
May 21, 2015 3:30 PM - Droid: I could be wrong though
May 21, 2015 3:31 PM - jbigler1986: I asked him to in the reply I sent to him. Who knows what the answer will be
May 21, 2015 3:31 PM - Droid: I tend to get distracted when I'm standing next to a room full of printers
May 21, 2015 3:33 PM - Mike Kelly: i think i actually need to solve the support from this with limonene
May 21, 2015 3:33 PM - Mike Kelly: otherwise it'll just live in it
May 21, 2015 3:34 PM - Mike Kelly: braydon is in atlanta jb so don't expect a reply for a bit
May 21, 2015 3:37 PM - jbigler1986: I'm not. Just saying. This him like a week last time. He said he didn't see it for some reason
May 21, 2015 3:39 PM - Stephen Capistron: I made something useful
May 21, 2015 3:39 PM - Stephen Capistron: http://imgur.com/Yhm8M5J,GRIObXo
May 21, 2015 3:43 PM - Mike Kelly: dog bowl out of concrete?
May 21, 2015 3:43 PM - Stephen Capistron: yup
May 21, 2015 3:43 PM - Mike Kelly: using a printed part for the positive i'm guessing
May 21, 2015 3:43 PM - Stephen Capistron: my princess has made herself terrified of a number of other ones
May 21, 2015 3:44 PM - Mike Kelly: lol
May 21, 2015 3:44 PM - Stephen Capistron: Yup. Printed a mold out of PETG
May 21, 2015 3:44 PM - Mike Kelly: huge print
May 21, 2015 3:44 PM - Stephen Capistron: the bottom of metal ones would pop like a snapple bottle cap
May 21, 2015 3:45 PM - Stephen Capistron: she didn't like that the glass bowl rocked
May 21, 2015 3:45 PM - Mike Kelly: lol
May 21, 2015 3:45 PM - Mike Kelly: such a sensitive dog
May 21, 2015 3:45 PM - Stephen Capistron: like i said. princess
May 21, 2015 3:45 PM - Stephen Capistron: she can be scared of her own shadow at times
May 21, 2015 3:46 PM - Stephen Capistron: i cast it upside down so the support for the hollow is what took the longest
May 21, 2015 3:46 PM - Stephen Capistron: well that and waiting for the concrete to set up enough

 

May 21, 2015 3:49 PM - jbigler1986: What would we do without a 3d printer
May 21, 2015 3:49 PM - Mike Kelly: i honestly have a hard time imagining life without one anymore
May 21, 2015 3:52 PM - jbigler1986: We are spoiled
May 21, 2015 4:04 PM - Mike Kelly: that was unsettling, i turned on my computer and my 144hz monitor was showing static
May 21, 2015 4:05 PM - jbigler1986: I had that one day. Troubleshot my pc for like 2 hours. Thought my gpus were fried. Just restarted the monitor and it was fine.
May 21, 2015 4:07 PM - Mike Kelly: i did the classic, unplug it and plug it back in
May 21, 2015 4:07 PM - Mike Kelly: worked
May 21, 2015 4:07 PM - Mike Kelly: alright what should I print?!
May 21, 2015 4:11 PM - Stephen Capistron: I've got a paper towel holder going right now
May 21, 2015 4:13 PM - Mike Kelly: oh yeah i need one of those
May 21, 2015 4:13 PM - Mike Kelly: and something to hold my nitrile glove boxes
May 21, 2015 4:16 PM - Mike Glass: what is the easy way to pause a print in s3d to change color
May 21, 2015 4:17 PM - Stephen Capistron:
May 21, 2015 4:17 PM - Stephen Capistron: I don't like the one i have now
May 21, 2015 4:17 PM - Stephen Capistron: I'm going vertical with a leaf spring to tear off / keep it from spinning
May 21, 2015 4:18 PM - Stephen Capistron: Oh, and it works, she wasn't afraid
May 21, 2015 4:42 PM - donhuevo: layer 72 of 75 of emmett's bearing printing now. fingers crossed
May 21, 2015 4:43 PM - Stephen Capistron: Ugh, and then it has to cool down
May 21, 2015 4:43 PM - donhuevo: there's that
May 21, 2015 4:43 PM - donhuevo: I hope this one spins
May 21, 2015 4:44 PM - Stephen Capistron: Slow it down? Change the extrusion factor?
May 21, 2015 4:44 PM - donhuevo: slowed it down
May 21, 2015 4:45 PM - Stephen Capistron: Should have set the extrusion to 93.1415962
May 21, 2015 4:45 PM - donhuevo: a good number to try
May 21, 2015 4:51 PM - Stephen Capistron: The suspense is killing me. Pour some water on it and pop that sucker off
May 21, 2015 4:51 PM - donhuevo: haha
May 21, 2015 4:51 PM - Stephen Capistron: If the glass breaks, not my fault
May 21, 2015 4:52 PM - donhuevo: the bed is at 50C right now. Another 5 minutes and it should pop off
May 21, 2015 4:55 PM - donhuevo: still stuck
May 21, 2015 4:57 PM - Stephen Capistron: When was the last time you calibrated your extruded?
May 21, 2015 4:57 PM - donhuevo: been a while
May 21, 2015 4:59 PM - Bill Monroe: I calibrate my extruder as often as I can
May 21, 2015 4:59 PM - Bill Monroe: oh wait.. you meant on the printer huh?
May 21, 2015 4:59 PM - Stephen Capistron: I was waiting for that punch line
May 21, 2015 5:00 PM - Bill Monroe: <didnt want to disappoint
May 21, 2015 5:05 PM - donhuevo: solid
May 21, 2015 5:13 PM - donhuevo: I copied/pasted my start & end gcodes from the cura engine over to slic3r and it failed for some reason. made some edits, trying again...
May 21, 2015 5:24 PM - jbigler1986: You can do it
May 21, 2015 5:26 PM - jbigler1986: Bill!
May 21, 2015 5:38 PM - donhuevo: slic3r isn't heating the bed or extruder. dangit.
May 21, 2015 5:44 PM - Droid: are the z axis steepers nema 17?
May 21, 2015 5:45 PM - donhuevo: they're all 17's
May 21, 2015 5:45 PM - Bill Monroe: jb!
May 21, 2015 5:46 PM - Droid: ok
May 21, 2015 5:46 PM - Bill Monroe: thanks DOn, now I got that Beatles tune stuck in my head
May 21, 2015 5:47 PM - jbigler1986: What's going on
May 21, 2015 5:47 PM - daniel871: http://imgur.com/OkGyNMB
May 21, 2015 5:48 PM - daniel871: Might actually finish this time.
May 21, 2015 5:51 PM - donhuevo: haha
May 21, 2015 5:51 PM - Bill Monroe: Project Managers should all be shot on sight
May 21, 2015 5:52 PM - daniel871: As should everyone involved in production of that Delta Internet meme safety video.
May 21, 2015 5:53 PM - Bill Monroe: ok, that's a little too specific
May 21, 2015 5:53 PM - donhuevo: if you're gonna shoot the project managers, may as well get all the general contractors too. and the messengers for good measure
May 21, 2015 5:54 PM - daniel871:
May 21, 2015 5:55 PM - daniel871: I've never felt so "Get off my lawn, you crazy kids!" As I did watching that video.
May 21, 2015 5:58 PM - daniel871: Those herringbone gears I printed in bridge completely disintegrated when trying to put them together. So the default S3D settings for nylon aren't quite there.
May 21, 2015 5:59 PM - Bill Monroe: How often to you fly on Delta?
May 21, 2015 6:01 PM - jbigler1986: Do*
May 21, 2015 6:01 PM - Bill Monroe: oh look, a new english professor!
May 21, 2015 6:01 PM - jbigler1986: I think I miss spell more than you. Lol
May 21, 2015 6:02 PM - Bill Monroe: I dunno about that
May 21, 2015 6:02 PM - jbigler1986: Put some triflow on that bearing and it is even better
May 21, 2015 6:03 PM - Stephen Capistron: Well now you are just rubbing it in
May 21, 2015 6:03 PM - Bill Monroe: ok, I'm going to go make some Chop Suey
May 21, 2015 6:04 PM - donhuevo: out of a project manager?
May 21, 2015 6:05 PM - daniel871: I wish I had project managers, I have to keep track of everything myself.
May 21, 2015 6:06 PM - daniel871: Also babysit manufacturing because nobody knows how to read drawings until I teach them.
May 21, 2015 6:07 PM - daniel871: Very carefully too, had someone cut a part into pieces to see if a section view was accurate
May 21, 2015 6:19 PM - Bill Monroe: project managers are the David Spade of modern Business
May 21, 2015 6:24 PM - jbigler1986: Never
May 21, 2015 6:30 PM - Mike Glass: jb do you know how to change color in the middle of a print using s3d?
May 21, 2015 6:31 PM - jbigler1986: Gotta enter M0 pause command at the start of the layer you want to pause at
May 21, 2015 6:32 PM - jbigler1986: After you slice and get the gcode. You have to edit it
May 21, 2015 6:33 PM - daniel871: Is that like an M1 on a cnc mill?
May 21, 2015 6:33 PM - jbigler1986: I haven't done it myself. Just read how to do it. I told bam how to and he tried it. He said it worked
May 21, 2015 6:33 PM - Droid: so I know mkelly has a lead screw adapter on thingiverse for the lead screws, but why cant I find a actually manufatured nut for them that is a regular"nut" and not a flange nut
May 21, 2015 6:33 PM - Mike Glass: I thought there was another way
May 21, 2015 6:33 PM - daniel871: So you'd have a prompt of some sort to continue on the LCD screen?
May 21, 2015 6:33 PM - Mike Glass: like layer change G-code
May 21, 2015 6:33 PM - Droid: they make them Ive seen them
May 21, 2015 6:34 PM - daniel871: Have you tried McMaster?
May 21, 2015 6:35 PM - Droid: i was just searching google and nothing appears, only flange nuts
May 21, 2015 6:35 PM - jbigler1986: There is in repetier. Didn't really work for me though
May 21, 2015 6:35 PM - Mike Glass: well poop
May 21, 2015 6:38 PM - daniel871: Try McMaster Carr directly. You can download models of all kinds of hardware in most formats.
May 21, 2015 6:38 PM - jbigler1986: There are lots of threads about it. I'm sure you can get it to work
May 21, 2015 6:39 PM - daniel871: What size nut you looking for droid?
May 21, 2015 6:42 PM - Droid: ones that fit these http://www.robotdigg.com/product/31/NEMA17-Threaded-Rod,-350mm-length-Tr8*8-Acme-Leadscrew
May 21, 2015 6:43 PM - Droid: but I'd rather not use a adapter with the flange nut
May 21, 2015 6:44 PM - Droid: I know there are nuts for them that fit for the z axis
May 21, 2015 6:45 PM - Droid: arggg, I'll email robo again and ask where they got theirs
May 21, 2015 6:45 PM - daniel871: http://www.mcmaster.com/#general-purpose-acme-nuts/=xa8tff
May 21, 2015 6:47 PM - Droid: nothing for that thread size from what I can see needs to be a High hex like the ones currently on our m8 threaaded rods
May 21, 2015 6:48 PM - Droid: maybe if I just go to there office and wave some bills infront of them theyll sell me a set
May 21, 2015 6:50 PM - jbigler1986: What are you looking for exactly
May 21, 2015 6:51 PM - jbigler1986: The black round part you see on the rod is the nut
May 21, 2015 6:52 PM - jbigler1986: Delrin nut is what it's called
May 21, 2015 7:00 PM - Droid: yeah I want a regular hex nut for it no adapter
May 21, 2015 7:01 PM - Mike Glass:
May 21, 2015 7:05 PM - jbigler1986: Why

 

May 21, 2015 7:08 PM - Droid: ok, look at the nut on your z axis that has the switches mounted to it, not imagine that on a lead screw, no flange nut and adapter.
May 21, 2015 7:10 PM - Stephen Capistron: so you want a nut for the lead screw that has the same exterior profile as the M8 coupling nut?
May 21, 2015 7:13 PM - Droid: yup
May 21, 2015 7:15 PM - Stephen Capistron: that isn't going to happen
May 21, 2015 7:15 PM - Stephen Capistron: unless you or someone makes one custom, it just isn't a thing
May 21, 2015 7:16 PM - Stephen Capistron: you could print one, but i don't know how long that would last
May 21, 2015 7:17 PM - Droid: all the printers running at robo3d office in san diego have them
May 21, 2015 7:18 PM - Stephen Capistron: you would have to ask them where they got them from. my guess is a custom build and that is what would hold up an upgrade kit coming from robo
May 21, 2015 7:19 PM - jbigler1986: So you are saying that they have linear steppers with integrated rods and lead nuts like the r1
May 21, 2015 7:20 PM - Mike Glass: nylon nuts?
May 21, 2015 7:20 PM - Stephen Capistron: For robo MFG long term it is likely cheaper to just get new molds made for the X motor and idler than to have thousands of nuts made. That would put them in a tough spot with upgrade kits because now it isn't justmotors, but the ends of the x axis too
May 21, 2015 7:20 PM - Stephen Capistron: maybe see how tough the 910 really is?
May 21, 2015 7:22 PM - jbigler1986: Still need to print with that
May 21, 2015 7:25 PM - Droid: yes Jb, the steepers have integrated lead screws and the lead nuts look just like the ones on the R1's currently
May 21, 2015 8:21 PM - daniel871: What would cause a "Temp Fall Error" on the LCD?
May 21, 2015 8:29 PM - Mike Glass: did temp fall?
May 21, 2015 8:38 PM - daniel871: By the time I woke up and noticed the printer stopped, yeah.
May 21, 2015 8:39 PM - daniel871: An hour into that yes no platform, too
May 21, 2015 8:40 PM - daniel871: loving how much quieter this runs with that bullet box full of coins.
May 21, 2015 8:41 PM - Mike Glass: did it eliminate the vibrating threaded rods?
May 21, 2015 8:42 PM - daniel871: only the hum of the stepper motors and fans.
May 21, 2015 8:42 PM - daniel871: Very slight rattle from the spool holder turning, but that's ok
May 21, 2015 8:45 PM - Mike Glass: mine vibrates really bad, but if I put weight on the sides it stops, I should put some weights on mine, its really annoying.
May 21, 2015 8:45 PM - daniel871: Well, I'm going to try going back to sleep.
May 21, 2015 8:45 PM - Mike Glass: ok see ya l8tr
May 21, 2015 8:47 PM - daniel871: It only needs weight opposite the x axis stepper. I'll upload that bullet box in the morning and post a link if jbigler doesn't see this and do it first.
May 21, 2015 8:50 PM - Mike Glass: ok
May 21, 2015 8:50 PM - Droid: temp fall error would occur if your fan is blowing to much on your hotend causing the temp to fall 10 degrees below its set point, were you printing PLA?
May 21, 2015 8:51 PM - Droid: had that issue with mine

 

May 22, 2015 4:08 AM - jbigler1986: Morning
May 22, 2015 4:10 AM - Shank: Morning JB
May 22, 2015 4:10 AM - jbigler1986: How are things
May 22, 2015 4:11 AM - Shank: wonderful, broke a fan last night and had a part fail for the 2nd time. how about you
May 22, 2015 4:22 AM - Shank: this is a 16-17 hour print
May 22, 2015 4:22 AM - Shank:
May 22, 2015 4:47 AM - TechSupportGo: 50% on the electric guitar!!!
May 22, 2015 4:51 AM - jbigler1986: Ninja mask?
May 22, 2015 4:52 AM - Shank: idk what its called, one of my friends want it for his airsoft mask
May 22, 2015 4:52 AM - jbigler1986: I haven't had a fail in a while. Knock on wood
May 22, 2015 4:52 AM - jbigler1986: Cool. What material
May 22, 2015 4:52 AM - Stephen Capistron: Morning
May 22, 2015 4:52 AM - Shank: it prints most of it great just and having problems with support
May 22, 2015 4:53 AM - Shank: PLA black
May 22, 2015 4:53 AM - Stephen Capistron: Tell your buddy he should try and find a bane mask for his paintball guard
May 22, 2015 4:53 AM - Stephen Capistron: Shank, what software are you using to slice?
May 22, 2015 4:53 AM - Shank: Cura
May 22, 2015 4:58 AM - Stephen Capistron: Try craftware. It is free and JB was reporting good support removal results
May 22, 2015 4:59 AM - Shank: Failed part
May 22, 2015 4:59 AM - Shank: alright i will try craftware when i get home
May 22, 2015 5:01 AM - Shank: here is the total design
May 22, 2015 5:13 AM - jbigler1986: yeah give craftware a try. double check the speed settings though. i was printing at what seemed to be like 90mm/s when i thought i did 40 on a tiny part i was testing. it failed
May 22, 2015 5:17 AM - jbigler1986: also you have to print from sd with it. it won't control the robo
May 22, 2015 5:18 AM - Shank: Craftware simple to set up?
May 22, 2015 5:20 AM - jbigler1986: yeah. just need to add your bed size and then change whatever settings you want to such as layer height.....
May 22, 2015 5:20 AM - Shank: alright sounds good i will try it when i get home, thanks
May 22, 2015 5:22 AM - jbigler1986: your welcome
May 22, 2015 5:22 AM - Shank: I’m having trouble committing to trying the switch to dual extruder, i would really like to be about to run dual material
May 22, 2015 5:23 AM - jbigler1986: that is a massive headache you are in for
May 22, 2015 5:24 AM - jbigler1986: lots of people that have went to dual don't even use it.
May 22, 2015 5:25 AM - Stephen Capistron: you should be able to reload the g-code from another host program though right?
May 22, 2015 5:26 AM - jbigler1986: hmmm. not sure
May 22, 2015 5:27 AM - Shank: JB how do you go about color change on a single extruder? Do you just pause the program?
May 22, 2015 5:28 AM - Stephen Capistron: One day Mike will come home to a tiko and one of these http://3dprint.com/67280/lewihe-play-cheapest-3d-print/
May 22, 2015 5:29 AM - Stephen Capistron: M0 S### ;seconds to wait M91 ;relative coordinates G1 Z2 ; up 2 G1 X# Y# E-50 ;get out of the way and retract a ton and write down how far you moved. Change your filament and clean up. G1 E5 ;prime the nozzle and clean it off G1 X# Y# Z-2 ;go back to where you left G90 ;back to absolute coordinates Cross fingers and wait.
May 22, 2015 5:29 AM - Stephen Capistron: no guarantees that that works
May 22, 2015 5:30 AM - bamhm182: Hey guys
May 22, 2015 5:30 AM - bamhm182: think I got the Hex plate figured out
May 22, 2015 5:31 AM - jbigler1986: bam what did you do to pause with M0? I remember telling you how to but i haven't tried it myself
May 22, 2015 5:31 AM - bamhm182: What do you mean?
May 22, 2015 5:31 AM - bamhm182: Oh
May 22, 2015 5:32 AM - bamhm182: S3D says each layer in its gcode. Slice it, figure out exactly what layer you want to pause it, then hit ctrl+f and find that layer, then put M0 in there
May 22, 2015 5:33 AM - Stephen Capistron: Will entering M0 a second time resume the print?
May 22, 2015 5:34 AM - bamhm182: No idea, I think I just pressed the button on my LCD screen and it resumed
May 22, 2015 5:34 AM - jbigler1986: @stehpen that printer the freaking build plate is moving back and forth. lol
May 22, 2015 5:35 AM - jbigler1986: doesn't look to terribly bad though
May 22, 2015 5:36 AM - bamhm182:
May 22, 2015 5:36 AM - bamhm182:
May 22, 2015 5:36 AM - jbigler1986: nice
May 22, 2015 5:36 AM - bamhm182: Having it lowered like that should make the nozzle be down far enough that I can use MK's carriage without modding it
May 22, 2015 5:37 AM - jbigler1986: ugh that color
May 22, 2015 5:37 AM - bamhm182: The only problem is that is doesn't fit perfectly in the carriage
May 22, 2015 5:37 AM - bamhm182: Yeah, it looked cooler in my head
May 22, 2015 5:37 AM - bamhm182: I think I might switch back to direct drive and print it out again, but in black
May 22, 2015 5:38 AM - jbigler1986: the fan color that is
May 22, 2015 5:39 AM - bamhm182: Oh
May 22, 2015 5:39 AM - bamhm182: Yeah, the tan is pretty bad
May 22, 2015 5:39 AM - bamhm182: I was thinking about making the fan holder go all the way around it for a second, haha
May 22, 2015 5:40 AM - jbigler1986: they should just make them all white
May 22, 2015 5:41 AM - bamhm182: Yeah
May 22, 2015 5:41 AM - bamhm182: They're good fans if you get past the color
May 22, 2015 5:41 AM - jbigler1986: or blue i would be cool with as my main pc is blue
May 22, 2015 5:44 AM - jbigler1986: they are great fan
May 22, 2015 5:44 AM - Stephen Capistron: so you are saying you are a fan?
May 22, 2015 5:45 AM - bamhm182: lol
May 22, 2015 5:46 AM - Stephen Capistron: wait till Mike Glass sees this > http://3dprint.com/65864/3d-print-soft-robot/
May 22, 2015 5:47 AM - bamhm182: hahaha, sweeet
May 22, 2015 5:49 AM - Shank: looks simple to build, i might remove the glue sticks and make a ninja flex back
May 22, 2015 5:49 AM - Stephen Capistron: semi flex might be a bit more spring like, or just a thin piece of PETG, XT, or nylon would do too
May 22, 2015 5:50 AM - bamhm182: So I put it all together and can confirm that it works
May 22, 2015 5:50 AM - bamhm182: Only problem is that I don't think he used M2 screws....
May 22, 2015 5:50 AM - bamhm182: Maybe 2.5mm
May 22, 2015 5:52 AM - Shank: has anyone tried using autodesk fusion 360?
May 22, 2015 5:53 AM - bamhm182: Nope
May 22, 2015 5:54 AM - bamhm182: Screw it, I'm modding his carriage to accept M3 screws instead of these
May 22, 2015 6:03 AM - jbigler1986: thats an easy fix
May 22, 2015 6:06 AM - bamhm182: Yeah, I just didn't want to make any changes to his design
May 22, 2015 6:08 AM - Shank: thats not a bad change, nothing a drill bit can fix
May 22, 2015 6:10 AM - bamhm182: Yeah
May 22, 2015 6:15 AM - Stephen Capistron: 35th anniversary of pac man today and no google pac man. So dissapointing.
May 22, 2015 6:16 AM - bamhm182: lame
May 22, 2015 6:17 AM - Stephen Capistron: it only cost 4.82 million hours of lost productivity last time
May 22, 2015 6:17 AM - bamhm182: Even Amazon did something
May 22, 2015 6:29 AM - Shank: Jb when are you going to finish your forum on removing the couplers?
May 22, 2015 6:29 AM - JeffTheMess: Good morning Robonauts (lets see how long I stay active today)
May 22, 2015 6:31 AM - JeffTheMess: Anyone printing today?
May 22, 2015 6:31 AM - bamhm182: Working on printing a carriage today
May 22, 2015 6:32 AM - Shank: depeneds on if i find my next mod
May 22, 2015 6:32 AM - Shank: i cant spell today
May 22, 2015 6:33 AM - JeffTheMess: Nice, bam you have single or dual?
May 22, 2015 6:33 AM - JeffTheMess: what have you modded so far Shank
May 22, 2015 6:33 AM - bamhm182: Slowly working on going dual
May 22, 2015 6:34 AM - Shank: E3D extruder, LCD, Dual fan, stud thermistor
May 22, 2015 6:34 AM - jbigler1986: @Shank when I can remember about it when i'm home. I always forget
May 22, 2015 6:35 AM - JeffTheMess: you put feet up shank?
May 22, 2015 6:35 AM - JeffTheMess: how far have you gone bam?
May 22, 2015 6:35 AM - Shank: yep
May 22, 2015 6:36 AM - JeffTheMess: good, you getting good print so far, no jams or nothing?
May 22, 2015 6:37 AM - Shank: i have had my printer for about 3 months now and only had 1 jam and that was with the hexagon
May 22, 2015 6:39 AM - JeffTheMess: you sound like jb, started upgrading as soon as he got it lol

 

May 22, 2015 6:39 AM - jbigler1986: I have had a bunch of jams all do to my own error though
May 22, 2015 6:39 AM - JeffTheMess: trial an error jb, I bet you learned more through those fails
May 22, 2015 6:39 AM - jbigler1986: sure have
May 22, 2015 6:40 AM - bamhm182: So far I've converted to Bowden with acceptable print quality.
May 22, 2015 6:40 AM - Shank: im running direct at the moment
May 22, 2015 6:40 AM - bamhm182: I also made the plate I'll be using for Mike's Modular carriage and the hex
May 22, 2015 6:41 AM - jbigler1986: well my hex was leaking very early on. so after taking off the boot (have I said that i hate that thing) i broke the thermistor. So my upgrading/modding needed to be started right away
May 22, 2015 6:41 AM - bamhm182: You can see it if you scroll up
May 22, 2015 6:41 AM - JeffTheMess: i think direct is best, if you not worried about speed
May 22, 2015 6:41 AM - bamhm182: Yeah, I have the boot as well. Mine is cracked
May 22, 2015 6:42 AM - bamhm182: My prints were definitely better on Direct
May 22, 2015 6:42 AM - jbigler1986: hell direct i can print at 100 just fine
May 22, 2015 6:42 AM - Shank: my thermistor broke when i removed the boot, stud is the way to go
May 22, 2015 6:42 AM - bamhm182: I think today I'm going to try and calibrate my steppers a bit
May 22, 2015 6:42 AM - jbigler1986: stud is nice
May 22, 2015 6:42 AM - jbigler1986: broke mine though. haha
May 22, 2015 6:43 AM - Shank: what are your speeds jb i might be running way to slow
May 22, 2015 6:43 AM - bamhm182: well, the stepper drivers... It seems like it is going to be such a hassle...
May 22, 2015 6:43 AM - JeffTheMess: how often you calibrate you robo?
May 22, 2015 6:43 AM - bamhm182: Maybe I won't...
May 22, 2015 6:43 AM - TechSupportGo: never
May 22, 2015 6:43 AM - jbigler1986: i've been printing at 85 lately on everything
May 22, 2015 6:43 AM - jbigler1986: me?
May 22, 2015 6:44 AM - bamhm182: I calibrated the x, y, z and e steps/mm when I first got it, then did the e again when I upgraded to Bowden
May 22, 2015 6:44 AM - Shank: i havent calibrated mine at all
May 22, 2015 6:44 AM - JeffTheMess: lol i only cal my rods
May 22, 2015 6:44 AM - bamhm182: As far as the drivers go though, never
May 22, 2015 6:44 AM - JeffTheMess: my RAMPS are starting to get dusty, I gotta clean them
May 22, 2015 6:44 AM - jbigler1986: i only paper calibrate like once a week. nothing else
May 22, 2015 6:45 AM - bamhm182: I need to pop in these new drivers to, so I guess I might as well do it now...
May 22, 2015 6:45 AM - JeffTheMess: your right
May 22, 2015 6:47 AM - JeffTheMess: when you guys print circles or spheres, are they close to perfect? i've hear some people say they get more oval
May 22, 2015 6:48 AM - Shank: jb how much difference did you seen when you made the coupler change?
May 22, 2015 6:48 AM - Stephen Capistron: it is night and day
May 22, 2015 6:48 AM - Stephen Capistron: stuff comes out super straigh
May 22, 2015 6:49 AM - Shank: worth the $100
May 22, 2015 6:49 AM - Shank: how much firmware change needs to be done?
May 22, 2015 6:50 AM - Stephen Capistron: I'd say so. You lose a little height going to the cheap ones from sainsmart though. I think my max is around 190-200. If I fused with my coupling nuts more I might be able to get that to like 210, but I don't think it is worth it.
May 22, 2015 6:51 AM - Stephen Capistron: Have to change the steps/mm and the movement speeds
May 22, 2015 6:52 AM - Stephen Capistron: that, the counterweight, and going to an e3d are probably the biggest things you can do to improve print quality / functionality
May 22, 2015 6:53 AM - Stephen Capistron: LCD is a big convenience improvement
May 22, 2015 6:53 AM - jbigler1986: yeah the no coupler was a HUGE differance
May 22, 2015 6:53 AM - Shank: whats the new numbers for steps/mm and movement speed?
May 22, 2015 6:54 AM - jbigler1986: You can print an adapter like I have that will get you back to the full z height
May 22, 2015 6:54 AM - Shank: is sainsmart nema 17 is what i should buy? or is there a better set out there?
May 22, 2015 6:55 AM - Stephen Capistron: omc-stepperonline sells a better unit
May 22, 2015 6:55 AM - jbigler1986: depends on the rods you get. my z steps are 400
May 22, 2015 6:56 AM - Stephen Capistron: http://www.omc-stepperonline.com/th...epper-motor-34mm-body-300mm-t8-x-8-p-218.html
May 22, 2015 6:56 AM - Stephen Capistron: JB and I both have the sainsmart
May 22, 2015 6:57 AM - jbigler1986: yep. although just using the rods and not the actual steppers
May 22, 2015 6:57 AM - Stephen Capistron: it requires taking your existing stepper apart and putting the insides of the new stepper in.
May 22, 2015 6:57 AM - jbigler1986: no rewiring anything
May 22, 2015 6:58 AM - Stephen Capistron: donhuevo has the above. i think they are plug and play from a hardware standpoint (still have to change the firmware), but am not sure
May 22, 2015 6:58 AM - Shank: i can take a stepper apart no problem that doesnt bother me, i will probaby go with the sainsmart and go from there
May 22, 2015 6:59 AM - bamhm182: I would absolutely recommend the LCD
May 22, 2015 6:59 AM - Shank: already did LCD
May 22, 2015 7:00 AM - bamhm182: Not only is it a convenience, your computer can't fuck up your print
May 22, 2015 7:00 AM - bamhm182: When I was first starting, my computer was crappy, so it would have all these little pauses while it was thinking about what it was doing
May 22, 2015 7:00 AM - JeffTheMess: I still use my little ol' sd card reader installed in the robo
May 22, 2015 7:01 AM - Stephen Capistron: Left is after, right is before.
May 22, 2015 7:01 AM - Shank: LCD was a amazing upgrade
May 22, 2015 7:02 AM - JeffTheMess: Stephen, thats with the new rods you installed?
May 22, 2015 7:02 AM - Shank: wow that is a major difference....well steppers will be here in a few days
May 22, 2015 7:04 AM - JeffTheMess: that is nice
May 22, 2015 7:05 AM - jbigler1986: i didn't do a side by side but i did an after and it was amazine
May 22, 2015 7:07 AM - jbigler1986: the best upgrade for the money. e3d is next
May 22, 2015 7:07 AM - Shank: steppers will be here tuesday by 8pm
May 22, 2015 7:07 AM - Shank: jb you havent done a e3d upgrade yet?
May 22, 2015 7:08 AM - JeffTheMess: yes he did
May 22, 2015 7:08 AM - Shank: read that wrong
May 22, 2015 7:08 AM - jbigler1986: i have an extra e3d too
May 22, 2015 7:09 AM - Stephen Capistron: yup, that is just from going to the new steppers. The combination of HfnC and less than straight M8 rods is a bad bad mix
May 22, 2015 7:11 AM - JeffTheMess:
May 22, 2015 7:13 AM - Shank: i need to go to a makerfaire
May 22, 2015 7:15 AM - JeffTheMess: cool, stuff happens there (sometimes)
May 22, 2015 7:17 AM - Shank: IMTS would probably be more fun
May 22, 2015 7:20 AM - JeffTheMess: on a side note Bill Nye the Science guy started a ...kickstarter to whom ever cares about space exploration like me
May 22, 2015 7:22 AM - Mike Glass: Morning gents
May 22, 2015 7:23 AM - JeffTheMess: morning Mike
May 22, 2015 7:25 AM - jbigler1986: morning
May 22, 2015 7:25 AM - Stephen Capistron: Stephen Capistron Today at 8:46 AM - Stephen Capistron: wait till Mike Glass sees this > http://3dprint.com/65864/3d-print-soft-robot/
May 22, 2015 7:26 AM - Stephen Capistron: Bill Nye is a bit of a sell out. One trip to Monsanto HQ and he changed his tune on GMO crops
May 22, 2015 7:26 AM - Mike Glass: cool they added an axis to the handibot, I need to buy one, those are so cool.
May 22, 2015 7:26 AM - Mike Glass: yea thanks stephen dl now..lol
May 22, 2015 7:29 AM - Stephen Capistron: I'm not surprised. You'll have a small army of them soon enough
May 22, 2015 7:30 AM - Mike Glass: I need somthing the dragons can ride on.
May 22, 2015 7:32 AM - Stephen Capistron: oh I got it. Animatronic dragon with a glue stick neck. Put the servos and stuff in the body
May 22, 2015 7:39 AM - Mike Glass: think I need to finish spherebot first before any other projects.
May 22, 2015 7:41 AM - Shank: anyone want to fix my delta printer for me?
May 22, 2015 7:43 AM - JeffTheMess: i'm surprised by this time, no one has started a small business to fix/upgrade printers
May 22, 2015 7:43 AM - jbigler1986: not a fun thing to ship
May 22, 2015 7:44 AM - Shank: i should probably just take it apart and make a reprap printer from it
May 22, 2015 7:45 AM - JeffTheMess: right, not fun, but to your average joe that may want to just print...it may be worth it
May 22, 2015 7:47 AM - Mike Glass: I think we have 3 3d printers in this town..lol
May 22, 2015 7:47 AM - Stephen Capistron: all owned by the same person too
May 22, 2015 7:48 AM - Shank: i know of 4 in my town
May 22, 2015 7:48 AM - Mike Glass: 1 High School, Library, and me
May 22, 2015 7:48 AM - jbigler1986: not sure how many are around me
May 22, 2015 7:49 AM - Mike Glass: im sure there are more though
May 22, 2015 7:49 AM - Shank: 2 high school, 1 me, 1 my friend

 

May 22, 2015 7:49 AM - JeffTheMess: i think don huevo is the only other person around me in nc
May 22, 2015 7:49 AM - Mike Glass: I know 2 poeple in my office that will be getting one
May 22, 2015 7:50 AM - Stephen Capistron: https://www.3dhubs.com/
May 22, 2015 7:51 AM - Stephen Capistron: punch in your zipcode and find out
May 22, 2015 7:53 AM - jbigler1986: 10 around me
May 22, 2015 7:53 AM - Shank: there is another robo 17 miles from me
May 22, 2015 7:55 AM - JeffTheMess: good to know i have a place to make money off my printer
May 22, 2015 7:56 AM - Mike Glass: nothing around 60 miles of me
May 22, 2015 7:56 AM - Stephen Capistron: there you go, you have the market cornered
May 22, 2015 7:57 AM - Mike Glass: I know there are at least 2 others in my MT group on thingiverse
May 22, 2015 7:58 AM - JeffTheMess: well atleast on that website your can make a killing
May 22, 2015 8:00 AM - Mike Glass: I'm signing up now
May 22, 2015 8:06 AM - Shank: anyone have a step file for the sainsmart nema 17
May 22, 2015 8:07 AM - jbigler1986: for?
May 22, 2015 8:09 AM - Shank: i like to keep my CAD file of my printer updated
May 22, 2015 8:09 AM - jbigler1986: gotcha
May 22, 2015 8:09 AM - jbigler1986: sure you can find one somewhere
May 22, 2015 8:09 AM - Stephen Capistron: the motor body won't be any different
May 22, 2015 8:10 AM - Shank: true
May 22, 2015 8:10 AM - Stephen Capistron: only the rod changes slightly. Biggest change will be the little adapters to make the flange nuts work
May 22, 2015 8:11 AM - Stephen Capistron: I hope you don't have the threading rendered
May 22, 2015 8:11 AM - Stephen Capistron: the biggest thing will be the overall length, but i would wait till you have them so you can just measure
May 22, 2015 8:12 AM - Shank: i started with the file that mike kelly put on thingiverse
May 22, 2015 8:13 AM - jbigler1986: for the adapter?
May 22, 2015 8:13 AM - Shank: no robo, i will be using the adapter in your forum
May 22, 2015 8:14 AM - jbigler1986: oh gotcha
May 22, 2015 8:14 AM - bamhm182: Is there a gcode command that says "Ignore all errors and just do what I tell you"?
May 22, 2015 8:15 AM - bamhm182: I'm trying to just have a single motor hooked up and feed it some gcode that just moves it for a few hours
May 22, 2015 8:15 AM - Bill Monroe:
May 22, 2015 8:15 AM - bamhm182: That way I can get a temperature read on it every 20 minutes or so and adjust the stepper driver until it's 50C
May 22, 2015 8:18 AM - Stephen Capistron: http://reprap.org/wiki/G-code
May 22, 2015 8:19 AM - Stephen Capistron: I'm still puzzled why you want to tune by motor temp
May 22, 2015 8:19 AM - JeffTheMess: those look good Bill
May 22, 2015 8:19 AM - bamhm182: I don't know, saw it in a youtube video, seems reasonable
May 22, 2015 8:20 AM - Bill Monroe: thanks Jeff
May 22, 2015 8:20 AM - JeffTheMess: the tiki too lol
May 22, 2015 8:20 AM - jbigler1986: horrible print bill
May 22, 2015 8:20 AM - jbigler1986: jk. looks good
May 22, 2015 8:20 AM - Stephen Capistron: The general approach is to turn the POT way down so it reads a really low reference voltage. Then send a G1 command to drive the stepper say 100mm and slowly increase the POT until the motor runs smooth
May 22, 2015 8:21 AM - Stephen Capistron: it does not take much
May 22, 2015 8:21 AM - Stephen Capistron: that XT?
May 22, 2015 8:21 AM - bamhm182: Alright, I'll give that a go
May 22, 2015 8:21 AM - Bill Monroe: parts for a filament guide
May 22, 2015 8:22 AM - bamhm182: Still, how do I tell the RAMPS to move the motor without caring about the the MINTEMP error?
May 22, 2015 8:22 AM - Bill Monroe: you cant bam, you either need to modify the firmware or connect a thermistor to the ramps
May 22, 2015 8:23 AM - Stephen Capistron: I was confused, I didn't realize this is a blank board without a thermistor
May 22, 2015 8:24 AM - bamhm182: I just don't want to have the extruder hot the whole time I'm doing this. I think I'll modify the firmware
May 22, 2015 8:24 AM - bamhm182: thanks
May 22, 2015 8:25 AM - Bill Monroe: i have a ramps setup to play with steppers.. nothing will heat up, even if you tell it to.. the only inputs are the limit switches and the thermistors.,, hook on to the input and you're done
May 22, 2015 8:26 AM - jbigler1986: why? the extruder is fine staying hot for a long time
May 22, 2015 8:26 AM - Stephen Capistron: you would only need the extruder hot if you are tuning the extruder motor so you have the proper resistance on it
May 22, 2015 8:26 AM - JeffTheMess: yeah thats the purpose of the extruder
May 22, 2015 8:26 AM - JeffTheMess: jb should know with his 54 hr print was it?
May 22, 2015 8:27 AM - jbigler1986: 67 hour
May 22, 2015 8:27 AM - bamhm182: That's a good point, so maybe I'll modify the firmware so I can tune the rest of them, then put it back and tune the extruder
May 22, 2015 8:31 AM - Stephen Capistron: You can run the others with the temp at 0
May 22, 2015 8:31 AM - Stephen Capistron: just do everything in the terminal
May 22, 2015 8:31 AM - jbigler1986: ^
May 22, 2015 8:40 AM - jbigler1986: who is currently printing?
May 22, 2015 8:43 AM - JeffTheMess: my print finished maybe an hour ago
May 22, 2015 8:43 AM - jbigler1986: SC, think i'm grabbing it today http://www.frys.com/product/8057134
May 22, 2015 8:44 AM - JeffTheMess: ustream(free) doesn't allow that high res,right?
May 22, 2015 8:45 AM - jbigler1986: well i need better quality and a wide angle. gonna use it for other stuff besides the printer as well'
May 22, 2015 8:46 AM - JeffTheMess: ahh, ok
May 22, 2015 8:46 AM - jbigler1986: plus i wanted a wifi one
May 22, 2015 8:48 AM - Stephen Capistron: $10 less on amazon
May 22, 2015 8:51 AM - donhuevo: fellas...
May 22, 2015 8:52 AM - bamhm182: Any idea why I wouldn't be able to move in the negative direction with G1 Y-10 F3200?
May 22, 2015 8:52 AM - bamhm182: I set it to relative first with G91
May 22, 2015 8:52 AM - Mike Glass: you cant pan or tilt with that camera, too much
May 22, 2015 8:53 AM - jbigler1986: i know. i have like $100 credit at frys too
May 22, 2015 8:54 AM - Mike Glass: get a mole camera, they are cheap and work good.
May 22, 2015 8:54 AM - Mike Glass: holy crap hotels are expensive in San Diego
May 22, 2015 8:55 AM - jbigler1986: base is huge on those those
May 22, 2015 8:55 AM - JeffTheMess: welcome to cali
May 22, 2015 8:56 AM - Stephen Capistron: ha moles >
May 22, 2015 8:56 AM - donhuevo: is that anything like the gerbil-cam the docs use for colonoscopies?
May 22, 2015 8:57 AM - Mike Glass: god those are ugly
May 22, 2015 9:02 AM - JeffTheMess: yes they are
May 22, 2015 9:02 AM - Stephen Capistron: but super cool
May 22, 2015 9:03 AM - Mike Kelly: heyo
May 22, 2015 9:04 AM - Stephen Capistron: late start for you. don't tell me you've had actual work to do
May 22, 2015 9:04 AM - Mike Kelly: nope i'm taking the day off for the drive down
May 22, 2015 9:04 AM - Mike Glass: He probaly just got up
May 22, 2015 9:04 AM - Mike Glass: You going to mexico?
May 22, 2015 9:04 AM - Mike Kelly: the new one yes
May 22, 2015 9:05 AM - Mike Glass: aw
May 22, 2015 9:05 AM - JeffTheMess: nice
May 22, 2015 9:05 AM - Mike Kelly: visiting my new niece
May 22, 2015 9:05 AM - jbigler1986: meth? the blue stuff?
May 22, 2015 9:06 AM - Stephen Capistron: don't forget your blocks
May 22, 2015 9:06 AM - Mike Kelly: yeah the meth state
May 22, 2015 9:06 AM - Mike Glass: so is 500 west hotel nice in SD?
May 22, 2015 9:07 AM - JeffTheMess: Bill may know
May 22, 2015 9:07 AM - bamhm182: I so don't understand why I can't get my motor to move in the negative direction... I probably shouldn't have done this...
May 22, 2015 9:07 AM - Mike Glass: Did you change your steps?
May 22, 2015 9:08 AM - bamhm182: No
May 22, 2015 9:08 AM - Mike Glass: What did you change?
May 22, 2015 9:09 AM - bamhm182: I unplugged everything, then plugged in just the Y-stepper motor, power, and therms
May 22, 2015 9:09 AM - Mike Glass: maybe missed a pin?

 

May 22, 2015 9:09 AM - bamhm182: Trying to calibrate my drivers
May 22, 2015 9:10 AM - bamhm182: Nope
May 22, 2015 9:10 AM - Mike Kelly: after a quick vapor bath: http://imgur.com/a/zQuyH
May 22, 2015 9:11 AM - jbigler1986: looks great
May 22, 2015 9:11 AM - JeffTheMess: yeah it does kudos
May 22, 2015 9:11 AM - jbigler1986: cold vapor or hot?
May 22, 2015 9:11 AM - Mike Kelly: http://imgur.com/a/Cv5cv
May 22, 2015 9:11 AM - Mike Kelly: hot
May 22, 2015 9:11 AM - Mike Kelly: thanks
May 22, 2015 9:12 AM - Mike Glass: make sure you wash them off with vinegar before the kids puts them in the mouth..lol
May 22, 2015 9:13 AM - Mike Kelly: http://i.imgur.com/0cuxdXL.jpg
May 22, 2015 9:13 AM - Mike Kelly: well i'll tell my sister that, it will be quite a while before the kiddo can hold anything
May 22, 2015 9:13 AM - Mike Glass: true that, I need like 5 of those holders, very nice
May 22, 2015 9:14 AM - Mike Kelly: yeah i was tired of all my bit cases
May 22, 2015 9:14 AM - Mike Kelly: figured this is a better way to organize them
May 22, 2015 9:14 AM - Mike Glass: you might have to share
May 22, 2015 9:14 AM - Stephen Capistron: their next child will be named something good like "christopher" just to challenge you a little more.
May 22, 2015 9:14 AM - Mike Kelly: haha
May 22, 2015 9:14 AM - Mike Kelly: right?
May 22, 2015 9:14 AM - Mike Kelly: NO MORE THAN 8
May 22, 2015 9:14 AM - Mike Kelly: it's a rule
May 22, 2015 9:15 AM - Mike Kelly: i guess i can do 10 with dashes
May 22, 2015 9:15 AM - jbigler1986: do i see a pup under that table?
May 22, 2015 9:16 AM - Mike Kelly: yeah you do
May 22, 2015 9:16 AM - Mike Kelly: https://www.dropbox.com/s/gi09gxp3lk2moh9/Bit Holder.STL?dl=0
May 22, 2015 9:16 AM - Mike Kelly: we were playing fetch
May 22, 2015 9:16 AM - Mike Kelly: https://www.dropbox.com/s/v4skga85g41rvgv/Bit Holder.SLDPRT?dl=0 here's the source file
May 22, 2015 9:17 AM - Mike Glass: sweet thanks MK
May 22, 2015 9:18 AM - jbigler1986: thx. i might use that as well
May 22, 2015 9:18 AM - Mike Kelly: sure
May 22, 2015 9:20 AM - jbigler1986: i need to print some linear bearings and open up the carriage bearing hole a little so they don't need "pressed"
May 22, 2015 9:21 AM - jbigler1986: more like a little pressure instead of pressed
May 22, 2015 9:22 AM - Mike Glass: http://imgur.com/a/bVOyN need to expoxy them in tonight
May 22, 2015 9:23 AM - Mike Kelly: very nice
May 22, 2015 9:24 AM - Stephen Capistron: not hot glue?
May 22, 2015 9:24 AM - Mike Glass: Im out
May 22, 2015 9:24 AM - Stephen Capistron:
May 22, 2015 9:24 AM - Mike Glass: metal and hot glue dont work so well
May 22, 2015 9:25 AM - Stephen Capistron: know what works on metal?
May 22, 2015 9:26 AM - Mike Glass: Welding?
May 22, 2015 9:26 AM - Stephen Capistron:
May 22, 2015 9:26 AM - Mike Glass: OH yOU SUCK
May 22, 2015 9:26 AM - Stephen Capistron:
May 22, 2015 9:27 AM - Mike Kelly: haha
May 22, 2015 9:27 AM - Mike Kelly: bonds virtually everything
May 22, 2015 9:27 AM - Mike Glass: takes to long to dry, epoxy is much faster
May 22, 2015 9:27 AM - Mike Kelly: whats your epoxy of choice
May 22, 2015 9:27 AM - Stephen Capistron: they make an epoxy
May 22, 2015 9:28 AM - Mike Glass: I dont mind gorilla, but the 2 bottles I bought over the years I used once and the rest dried up.
May 22, 2015 9:29 AM - bamhm182: Pretty sure I broke something
May 22, 2015 9:30 AM - Mike Glass: I think I use locktite
May 22, 2015 9:30 AM - Mike Glass: although the last stuff actualy may be gorilla
May 22, 2015 9:32 AM - Stephen Capistron: could always go the drill and countersink route
May 22, 2015 9:32 AM - Stephen Capistron: then you can recycle them with less effort
May 22, 2015 9:33 AM - Mike Kelly: couldn't you have cut the channels with a dado blade
May 22, 2015 9:34 AM - Mike Glass: I could of but dont have one for my regular table saw, just my shopsmith
May 22, 2015 9:35 AM - Mike Glass: not much to drill in though only 3/8" or so
May 22, 2015 9:35 AM - Mike Kelly: right
May 22, 2015 9:36 AM - Mike Glass: epoxy is easy to break off, I would just cut right behind the on the backside of the slots if I need to recycle them.
May 22, 2015 9:37 AM - Mike Glass: This will be removeable from the cnc so I can use it anywhere.
May 22, 2015 9:39 AM - Mike Kelly: good idea
May 22, 2015 9:44 AM - Mike Glass: you driving down now MK or at the destination?
May 22, 2015 9:44 AM - donhuevo: I'm surprised someone didn't suggest nuts&bolts or other fasteners for attaching metal
May 22, 2015 9:45 AM - Mike Kelly: the misses had to finished up her scrap book/gift so i'm just waiting for her
May 22, 2015 9:45 AM - Mike Glass: aw gotcha, how long of drive is it?
May 22, 2015 9:45 AM - Mike Kelly: like 6.5 hours
May 22, 2015 9:46 AM - Mike Kelly: my sister wanted something at ikea so we'll stop on the way and eat lunch there
May 22, 2015 9:47 AM - Mike Glass: I havent been in one of those for 4 years. cool place.
May 22, 2015 9:47 AM - Mike Kelly: yeah they're interesting
May 22, 2015 9:47 AM - Stephen Capistron: I suggested screws, but Mike n Mike correctly pointed out that the section of MDF is pretty thin
May 22, 2015 9:47 AM - Mike Kelly: once you go like 20 times though...
May 22, 2015 9:47 AM - Stephen Capistron: having a protrusion on the other side would limit the boards usefulness
May 22, 2015 9:48 AM - jbigler1986: love ikea
May 22, 2015 9:48 AM - jbigler1986: that one in Lone Tree Mk is huge
May 22, 2015 9:48 AM - Stephen Capistron: ugh, place is full of fall-a-particle board
May 22, 2015 9:50 AM - Mike Kelly: yup
May 22, 2015 9:52 AM - Mike Kelly: all the stuff i have is soft wood
May 22, 2015 9:52 AM - Stephen Capistron: it is just not intended to last
May 22, 2015 9:53 AM - Mike Kelly: nope
May 22, 2015 9:53 AM - Mike Kelly: but it's good starter furniture
May 22, 2015 9:54 AM - Stephen Capistron: or kid furniture
May 22, 2015 9:54 AM - Mike Kelly: that too
May 22, 2015 9:54 AM - Mike Kelly: it'll last 5-10 years if you don't move it much
May 22, 2015 10:02 AM - Mike Kelly: http://i.imgur.com/S3k5lhW.jpg
May 22, 2015 10:02 AM - Mike Kelly: and it works
May 22, 2015 10:02 AM - jbigler1986: i had a beefy red storage shelf cube thing. It was heavy as hell and made very very well. Not sure what material it was
May 22, 2015 10:24 AM - Mike Glass: should be easy enough to adapt to slat board
May 22, 2015 10:40 AM - Stephen Capistron: that glass cutter is still just hanging out
May 22, 2015 10:41 AM - jbigler1986: ha
May 22, 2015 10:42 AM - jbigler1986: also that crescent wrench is to small
May 22, 2015 10:55 AM - jbigler1986: set up 3dhub as well. need to print the keychain
May 22, 2015 10:56 AM - Mike Glass: what did you put down for your start charge?
May 22, 2015 10:57 AM - jbigler1986: $5
May 22, 2015 10:57 AM - jbigler1986: might change it though
May 22, 2015 10:58 AM - jbigler1986: see what kind of stuff people want
May 22, 2015 10:58 AM - Mike Glass: I saw most here started at $25
May 22, 2015 10:59 AM - jbigler1986: it's mostly $10 around here
May 22, 2015 10:59 AM - Mike Glass: just depends if its worth your time
May 22, 2015 10:59 AM - Stephen Capistron: guy near me is $10
May 22, 2015 10:59 AM - jbigler1986: yep

 

May 22, 2015 11:00 AM - Stephen Capistron: and 1$/cc for PLA
May 22, 2015 11:01 AM - jbigler1986: wow
May 22, 2015 11:02 AM - jbigler1986: woah. there is a guy like 2 minutes away from me
May 22, 2015 12:05 PM - Mike Glass: Hey don, did you get a good gear bearing printed?
May 22, 2015 12:10 PM - jbigler1986: i dont think he is here
May 22, 2015 12:24 PM - Mike Glass: hmm, I dont think anybody is?
May 22, 2015 12:29 PM - Stephen Capistron: i am. i actually got work to do
May 22, 2015 12:30 PM - Stephen Capistron: i haven't had anything to do pretty much all week
May 22, 2015 12:30 PM - Stephen Capistron: and friday afternoon, here is a project
May 22, 2015 12:35 PM - Mike Glass: Yea nobody really works here on Fridays
May 22, 2015 12:36 PM - Stephen Capistron: i just need a new job
May 22, 2015 12:38 PM - Mike Glass: http://imgur.com/FNkYTJZ finally found the specs on these 3.7volt 2600mah
May 22, 2015 12:38 PM - Stephen Capistron: oh and?
May 22, 2015 12:39 PM - Mike Glass: I have like over 20 packs of these and all in working condidtion, just need to find what I can do with them.
May 22, 2015 12:41 PM - Stephen Capistron: um a robot
May 22, 2015 12:41 PM - Stephen Capistron: a custom UPS
May 22, 2015 12:41 PM - Stephen Capistron: 20 packs or 20 cells?
May 22, 2015 12:42 PM - Mike Glass: 20 packs
May 22, 2015 12:43 PM - Stephen Capistron: electric go kart?
May 22, 2015 12:43 PM - Mike Glass: I think there are a few more down in the recycle also.
May 22, 2015 12:43 PM - Stephen Capistron: homemade krazykart?
May 22, 2015 12:44 PM - Stephen Capistron: Those lithium batteries really benefit from a smart charger / discharger
May 22, 2015 12:44 PM - Mike Glass: I have a pretty decent one from the hobby store
May 22, 2015 12:48 PM - Stephen Capistron: hop on ebay and find a good motor to hook them up to. DC is obviously easiest
May 22, 2015 12:56 PM - Mike Glass: I have a rechargable lawnmower motor.. hmmm
May 22, 2015 12:57 PM - savior2064: wher can i download r1 with the heat bed firmware
May 22, 2015 12:58 PM - Mike Glass: what threads do you have?
May 22, 2015 12:59 PM - Mike Glass: http://help.robo3dprinter.com/Wiki/RoBo_3D_Firmware
May 22, 2015 1:00 PM - Mike Glass: http://www.amazon.com/Aosom-Electric-Battery-Powered-Conversion/dp/B00GIXZKP8 ok this looks like fun
May 22, 2015 2:15 PM - jbigler1986: Back
May 22, 2015 2:18 PM - jbigler1986: What's going on
May 22, 2015 2:18 PM - Mike Glass: you home ?
May 22, 2015 2:19 PM - jbigler1986: For a few minutes yes
May 22, 2015 2:19 PM - Mike Glass: Then you hitting the town?
May 22, 2015 2:20 PM - jbigler1986:
May 22, 2015 2:21 PM - jbigler1986: New car seats. Not sent to stores yet. Should be in 2 weeks
May 22, 2015 3:26 PM - jbigler1986: Crickets
May 22, 2015 3:27 PM - jbigler1986: MG did you print the marven Keychain
May 22, 2015 3:43 PM - TechSupportGo: hello
May 22, 2015 4:08 PM - jbigler1986: What's up
May 22, 2015 4:43 PM - Bill Monroe: Jello
May 22, 2015 4:51 PM - jbigler1986: Hi there
May 22, 2015 4:52 PM - jbigler1986: About to go get a new camera
May 22, 2015 5:04 PM - jbigler1986: What are you up to
May 22, 2015 5:12 PM - Bill Monroe: just striaghtening up lil.. working on the filament guide
May 22, 2015 5:15 PM - Bill Monroe: what kind of camera?
May 22, 2015 5:27 PM - toy: http://3dprint.com/64972/robo-3d-engineer-study/
May 22, 2015 5:35 PM - Bill Monroe: imagine that.. a 3D printer company releasing data that promotes 3D printers..
May 22, 2015 5:49 PM - TechSupportGo: whats the filament guide about Bill?
May 22, 2015 5:51 PM - Bill Monroe: well, it's all about guiding the filament!
May 22, 2015 5:52 PM - Bill Monroe: ', just making a doodad to allow me to put the reels on the stand i used when I had a bowden setup
May 22, 2015 5:58 PM - TechSupportGo: why do i talk to you
May 22, 2015 5:59 PM - Mike Glass: lol
May 22, 2015 6:00 PM - Mike Glass: Hey JB did you get a new cam
May 22, 2015 6:02 PM - jbigler1986: Yeah. Went with the lifecam cinema HD. Samsung smartcam I don't think I could stream to ustream
May 22, 2015 6:04 PM - Mike Glass: cool. lifecam is awesome
May 22, 2015 6:05 PM - jbigler1986: It's even smaller than I thought
May 22, 2015 6:22 PM - Mike Glass: printing marvin now
May 22, 2015 6:31 PM - jbigler1986: thats what i'm doing in a little bit
May 22, 2015 6:36 PM - jbigler1986: Need to make a new mount now
May 22, 2015 7:03 PM - Mike Glass: not bad. http://i.imgur.com/hKloY5M.jpg
May 22, 2015 7:25 PM - jbigler1986: Not at all
May 22, 2015 7:25 PM - jbigler1986: How long did it take
May 22, 2015 7:36 PM - Mike Glass: under 30 min
May 22, 2015 7:43 PM - jbigler1986: sweet. took back that mini pc. moved one of my other pcs that i never use under the desk. gonna use it now. so setting it up. gonna print that here in probably like 20 minutes
May 22, 2015 7:57 PM - jbigler1986: Got a sweet deal from Braydon. Ugh. So tempting
May 22, 2015 7:57 PM - Mike Glass: on a refurb?
May 22, 2015 7:59 PM - jbigler1986: Yeah with steppers with integrated rods
May 22, 2015 8:07 PM - Mike Glass: do it do it
May 22, 2015 8:10 PM - jbigler1986: I will decide over the weekend. It's a really good deal and less work for me
May 22, 2015 8:10 PM - jbigler1986: Gonna print marvin in a few then a mount for the lifecam
May 22, 2015 8:17 PM - jbigler1986: damn ustream has to install so much crap
May 22, 2015 8:22 PM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
May 22, 2015 8:27 PM - daniel871: How much we talking, and if you don't want it who is next in line?
May 22, 2015 8:27 PM - jbigler1986: don't really wanna say honestly
May 22, 2015 8:28 PM - daniel871: I think I may need to get that enclosure, had a wine glass I was printing snap when the A/C came on while I was outside doing yardwork.
May 22, 2015 8:28 PM - jbigler1986: what material
May 22, 2015 8:28 PM - daniel871: Base was stuck to the bed and it was printing the cup portion when the stem snapped.
May 22, 2015 8:28 PM - daniel871: T-glase.
May 22, 2015 8:28 PM - Mike Glass: what infill you doing jb?
May 22, 2015 8:29 PM - jbigler1986: 15
May 22, 2015 8:29 PM - Mike Glass: Think I did 30
May 22, 2015 8:29 PM - jbigler1986: that's my norm
May 22, 2015 8:30 PM - daniel871: I figure that enclosure would have at least kept the shock of a cold air draft from snapping the print.
May 22, 2015 8:31 PM - daniel871: (T-glase prints I've done seem to take a long time to cool down)
May 22, 2015 8:32 PM - daniel871: I forgot about the bullet box thing I was talking to somebody about last night.
May 22, 2015 8:32 PM - jbigler1986: MG can help you more with tglase
May 22, 2015 8:32 PM - jbigler1986: what about the bullet box?
May 22, 2015 8:33 PM - daniel871: Was talking here about how much a difference it made on the vibration noise.
May 22, 2015 8:33 PM - daniel871: Basically filled it with all of the pennies and nickles I have and it took the vibration noise out.
May 22, 2015 8:34 PM - jbigler1986: oh. yeah. i did to keep it level. the right side of my first layer was always like .1mm higher. always printed fine it was just very annoying
May 22, 2015 8:34 PM - daniel871: All I hear now is the stepper motor sound, the noise the gears on the extruder make when they change directions for retraction.
May 22, 2015 8:35 PM - daniel871: And the sound that stupid wire sheath makes as it slides through the loop at the top of the robo when the axis moves from one end of the machine to the other.
May 22, 2015 8:36 PM - jbigler1986: yeah i got rid of that shit. very annoying
May 22, 2015 8:36 PM - daniel871: First few times I heard it during a rapid traverse during a print I thought the print was being torn off the bed.
May 22, 2015 8:36 PM - Mike Glass: http://vaughnlive.tv/coolreactions
May 22, 2015 8:37 PM - jbigler1986: oh and i took back that mini pc bc it stopped giving video output.
May 22, 2015 8:37 PM - daniel871: Temporary fix for that tube is putting a foam ear plug into it and letting it expand after pulling all the slack thru it.
May 22, 2015 8:37 PM - jbigler1986: bowl?
May 22, 2015 8:37 PM - Mike Glass: Bird House