1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Added lcd now this

Discussion in 'Troubleshooting' started by jonnyb44, Feb 22, 2016.

  1. jonnyb44

    jonnyb44 Member

    Joined:
    Feb 11, 2016
    Messages:
    75
    Likes Received:
    16
    I uploaded the software and tryed to do a print and got this. [​IMG]


    Sent from my iPhone using Tapatalk
     
    #1 jonnyb44, Feb 22, 2016
  2. Robert J.

    Robert J. Member

    Joined:
    Dec 23, 2015
    Messages:
    46
    Likes Received:
    7
    What software? My lcd was a plug-in play. It looks like your Z steps are off or your extruder needs to be calibrated.

    Sent from my SM-G920V using Tapatalk
     
    #2 Robert J., Feb 23, 2016
  3. jonnyb44

    jonnyb44 Member

    Joined:
    Feb 11, 2016
    Messages:
    75
    Likes Received:
    16
    I loaded the v3 firmware. So Z steps were wayyyyy off. For some reason I couldn't add the full graphics controler in the updated lead screw firmware. So I ended up modifying the z steps in the v3 firmware seems to be working


    Sent from my iPhone using Tapatalk
     
    #3 jonnyb44, Feb 23, 2016
  4. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,276
    Use the lead screw upgrade firmware, AKA Robo3DR1PlusV1

    v3 is for older non-Plus printers
     
    #4 Mike Kelly, Feb 24, 2016
  5. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    @jonnyb44 They are exactly the same firmwares except for Z axis steps (all Marlin 1.0.0), so the lines to comment/uncomment should be in exactly the same place. No worries, you figured it out anyway.
     
    #5 WheresWaldo, Feb 24, 2016
  6. jonnyb44

    jonnyb44 Member

    Joined:
    Feb 11, 2016
    Messages:
    75
    Likes Received:
    16
    I ended up playing with the lead screw software because there are some other minor changes. Print speed would not change. But I finally got it working


    Sent from my iPhone using Tapatalk
     
    #6 jonnyb44, Feb 24, 2016
  7. Robert J.

    Robert J. Member

    Joined:
    Dec 23, 2015
    Messages:
    46
    Likes Received:
    7
    If I can make a recommendation, the lcd is a great tool but I would make my next upgrade it the lead screw. I did it on mine and the quality of print is well worth the $100.00

    Sent from my SM-G920V using Tapatalk
     
    #7 Robert J., Feb 26, 2016
  8. jonnyb44

    jonnyb44 Member

    Joined:
    Feb 11, 2016
    Messages:
    75
    Likes Received:
    16
    It came with it.


    Sent from my iPhone using Tapatalk
     
    #8 jonnyb44, Feb 26, 2016

Share This Page