1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved Hardware error

Discussion in 'Troubleshooting' started by capecodcharlie, Aug 16, 2016.

  1. capecodcharlie

    Joined:
    Aug 16, 2016
    Messages:
    71
    Likes Received:
    3
    I'll have to buy a ream of paper for printer to copy it LOL , but I think I saw a few thing I'm working on , Thanks
     
  2. Ryan TeGantvoort

    Ryan TeGantvoort Active Member

    Joined:
    Mar 11, 2016
    Messages:
    343
    Likes Received:
    172
    No need to keep showing the terminal, I believe we have ruled that out. Increase your bottom and top layers, and the grid you see on the bottom of the print will disappear.
     
  3. Ryan TeGantvoort

    Ryan TeGantvoort Active Member

    Joined:
    Mar 11, 2016
    Messages:
    343
    Likes Received:
    172
    I would definitely not print all of it lol! :eek: If you print anything I would just print that Cheat Sheet I attached and bookmark the RepRap G-Code page, to be used as another reference.
     
  4. Ryan TeGantvoort

    Ryan TeGantvoort Active Member

    Joined:
    Mar 11, 2016
    Messages:
    343
    Likes Received:
    172
    Looks like you have some Z-Banding/Ribbing whatever its called, which is caused by not having the LeadScrew upgrade.
     
  5. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    OK...so from the output...it looks like the auto bed leveling routine is working just fine. Your print doesn't look horrible. I would suggest more top and bottom layers.
     
  6. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    Ryan did you mean to attach something here?
     
  7. Ryan TeGantvoort

    Ryan TeGantvoort Active Member

    Joined:
    Mar 11, 2016
    Messages:
    343
    Likes Received:
    172
    LOL yeah I uploaded it for some reason it didn't take it. o_O
     

    Attached Files:

    Rigmarol likes this.
  8. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    Hahaha...Thanks. That is a nice reference. Some extra space on the second page to write in the ones that aren't there that you may want to reference as well.
     
    Ryan TeGantvoort likes this.
  9. capecodcharlie

    Joined:
    Aug 16, 2016
    Messages:
    71
    Likes Received:
    3
    O K , Im back , How do I get more top and bottom layers , ?? Thanks
     
  10. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    It's a setting in Matter Control. I don't use MC so I'll have to open it up and look. I'm in a dentist chair, but will check where you set that when i get home. :)
     
    Ryan TeGantvoort likes this.
  11. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    I shoot for 3 to 5 layers top and bottom depending on what I am printing.
     
  12. capecodcharlie

    Joined:
    Aug 16, 2016
    Messages:
    71
    Likes Received:
    3
    Ug , I'm not a fan of dentist , O k I do not want to bother you right now , Thanks I'll look for it later Thanks
     
  13. Ryan TeGantvoort

    Ryan TeGantvoort Active Member

    Joined:
    Mar 11, 2016
    Messages:
    343
    Likes Received:
    172
    See the attached file. I downloaded MC again quick. I prefer to use a count instead of mm. Anywhere from 3-5, depending on the model.
     

    Attached Files:

  14. capecodcharlie

    Joined:
    Aug 16, 2016
    Messages:
    71
    Likes Received:
    3
    O. K , I'll open the matter control and look around , see if I find anything , ?? Nobody seems to use this ?? What do you all use , ?? Thanks
     
  15. capecodcharlie

    Joined:
    Aug 16, 2016
    Messages:
    71
    Likes Received:
    3
    O K I found this Layer height.0.2 And then there's first layer height 0.3 mm , perimeters 2 , fill density 0.25 z offset 0 , ( picture included ) there all in mm , so do I add 0.5 to the layer height and so on , say to get the extra layers ?? Thanks ,
     
  16. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    No, you add more top/bottom layers to the layer count.
    If the slicer is configured for 3 top/bottom layers make it 6, etc.

    The first layer height has nothing at all to do with this.
     
  17. capecodcharlie

    Joined:
    Aug 16, 2016
    Messages:
    71
    Likes Received:
    3
    For got to put picture in ,
    image.jpg
     
  18. capecodcharlie

    Joined:
    Aug 16, 2016
    Messages:
    71
    Likes Received:
    3
    Would it be the Perimeters that I ajust ??. Thanks
     
  19. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338

Share This Page