1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
Page 1 of 2
  1. janot928
    Post

    Unresolved Fine til I start printing then Extruder switched off

    do you have a fan blowing air on the hotend ? caused me that problem (temperature dropped to low and print failed) also try and re-tighten the...
    Post by: janot928, Oct 30, 2016 in forum: Troubleshooting
  2. janot928
    Thread

    Unanswered improving abs print

    soooo. . . i recently started printing abs and i have been having a few issues. - i have been having some kind of Z ribbing on a "fine" pillar...
    Thread by: janot928, Oct 30, 2016, 1 replies, in forum: Troubleshooting
  3. janot928
    Post

    Unresolved Z axis doesn't stop when raised with LCD

    then we know that the problem comes from the lcd. Another dumb question, have you checked the cables/ pins on the ramps and LCD ?
    Post by: janot928, Oct 17, 2016 in forum: Troubleshooting
  4. janot928
    Post

    Unresolved Z axis doesn't stop when raised with LCD

    stupid question, if you connect your computer directly via USB does it do the same ?
    Post by: janot928, Oct 15, 2016 in forum: Troubleshooting
  5. janot928
    Post

    Unresolved Z axis doesn't stop when raised with LCD

    i've also had a few problems with my LCD but it was more random errors that recursives ones
    Post by: janot928, Oct 14, 2016 in forum: Troubleshooting
  6. janot928
    Post

    Was - Linear Rails -Now making own printer

    do you know the youtube chanel Tech2C ? He has been creating a new 3d printer https://www.youtube.com/channel/UC_scf0U4iSELX22nC60WDSg
    Post by: janot928, Oct 14, 2016 in forum: Projects
  7. janot928
    Post

    Was - Linear Rails -Now making own printer

    Why do it the easy way ? Too easy XD
    Post by: janot928, Oct 3, 2016 in forum: Projects
  8. janot928
    Post

    Solved need help my printerbed does not reach 50 C

    hav you tried to just heat up the bed manually ? if yes and it doesn't work try to go watch on the reprap board if everything is well connected
    Post by: janot928, Jul 27, 2016 in forum: Troubleshooting
  9. janot928
    Post

    Unresolved Ringing on models.

    It looks way to regular to be an communication problem imo could also be some kind of resonance thing from somewhere or just something with the...
    Post by: janot928, Feb 28, 2016 in forum: Troubleshooting
  10. janot928
    Post

    Unanswered Z-Axis Fun -- Problem Out Of Box

    maybe a few pictures could help understanding the reasons behind all this
    Post by: janot928, Feb 28, 2016 in forum: Troubleshooting
  11. janot928
    Post

    Unresolved Bubbles on final product

    i also went with cheap filament and it causes other problems but not this one
    Post by: janot928, Feb 28, 2016 in forum: Troubleshooting
  12. janot928
    Post

    Halo Helmet

    anny photos of the finished product ?
    Post by: janot928, Feb 28, 2016 in forum: Projects
  13. janot928
    Post

    convert robo3d into cnc

    If i remember correctly there a hand held extension to the dremel that is quite light weight might work with very slow speeds and stuff (do not...
    Post by: janot928, Feb 28, 2016 in forum: General Questions
  14. janot928
    Post

    Unresolved Easiest New/Upgrade Extruder for Robo 3d R1

    the thing that came out is called the thermistor. It is the temperature sensor of the hot end. just try to not touch it to mutch with your bare...
    Post by: janot928, Feb 28, 2016 in forum: Troubleshooting
  15. janot928
    Post

    Unanswered LED Lights Wires

    from memory the white is + and blue is -. But you can always try one way and if doesn't light up then just sich polarities
    Post by: janot928, Feb 28, 2016 in forum: Troubleshooting
  16. janot928
    Post

    Unresolved Bubbles on final product

    add a few top layers. A good rule of thumb is about 1 to 1.2mm on the top. Look into your settings. There are a lots of variables so feel free...
    Post by: janot928, Feb 28, 2016 in forum: Troubleshooting
  17. janot928
    Post

    Solved retract filiment

    you are welcome. I really enjoy this forum too. looking forward to seeing your prints on day :D
    Post by: janot928, Feb 28, 2016 in forum: Troubleshooting
  18. janot928
    Post

    Just got my Robo 3d r1 plus yesterday Feb 18th. :)

    @cdsl810 i agree with you. What I do is just put the filament close to the hobbed bolt and then turn it by hand it also work most of the time for...
    Post by: janot928, Feb 28, 2016 in forum: Show and Tell
  19. janot928
    Post

    Filament Storage Box DIY

    woo. Nice one man an great tutorial
    Post by: janot928, Feb 27, 2016 in forum: Projects
  20. janot928
    Post

    Piston and Connecting Rod at 1:2 scale and HQ.

    nice modelling man. I eagerly whait to see the finished product :D V5 ftw
    Post by: janot928, Feb 27, 2016 in forum: Projects
Showing results 1 to 20 of 28 Next >
Search Again
Page 1 of 2