1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
  1. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Next time I run a print I'll have a camera on the boards under the access door. We'll see what shuts off first. I suspect it's the same cable for...
    Post by: CarAudioFab, Nov 17, 2017 in forum: Troubleshooting
  2. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Fan is working, I don't believe this is it. Pi is always flashing red and green on the indicator light. Is that normal?
    Post by: CarAudioFab, Nov 17, 2017 in forum: Troubleshooting
  3. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Well to follow up I can confirm the robo is completely rebooting itself mid print. The gcode log just stopped mid normal coordinate command. I...
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  4. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Thanks, so quick questions about this web interface: Is the computer sending all the gcode? Or does loading the gcode to the R2 store it on the...
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  5. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Can the links be added to your post here? http://community.robo3d.com/index.php?threads/r2-c2-documentation.18755/
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  6. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Yes please, I was crawling and searching every last inch of this place and if you hadn't posted these links I don't know if I would have found...
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  7. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Well hot damn, that's about a million times more helpful than the links from the official "support" section of the site, I was looking here:...
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  8. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Looks like Robo use to have info at the following link, but all info has been pulled: https://help.robo3d.com/en/latest/web-interface/index.html
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  9. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    I must completely be missing something. Nowhere in the Robo documentation on their software page does it mention Octoprint or a web interface. How...
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  10. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    I keep hearing about Octoprint and its settings, but I'll be honest. I have no idea how to access it. Is this something through Cura? The "web...
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  11. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Wait, is this something you can do via the web interface? I'm not familiar with how I would look at the log files at all on the pi
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  12. CarAudioFab
    Post

    R2 Stops Randomly Mid Print

    Does OctoPrint store logs even if not using web interface? I haven't touched the web interface yet as I have just been printing off the stick.
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  13. CarAudioFab
    Thread

    R2 Stops Randomly Mid Print

    I am currently printing by exporting tool paths from Simplify3D to the Robo provided USB stick and then printing off of that. I am finding that...
    Thread by: CarAudioFab, Nov 16, 2017, 43 replies, in forum: Troubleshooting
  14. CarAudioFab
    Post

    How to disable priming line?

    Awesome, thank you, I will follow up with my findings once I do this.
    Post by: CarAudioFab, Nov 16, 2017 in forum: Troubleshooting
  15. CarAudioFab
    Post

    Simplify3d and RoboR2 with USB

    Just adding my findings here. While you can control the Z-Offset via S3D it is much better to control via the machine as stated. I was sort of...
    Post by: CarAudioFab, Nov 16, 2017 in forum: Software
  16. CarAudioFab
    Thread

    How to disable priming line?

    How can I disable the priming line the printer makes before printing? I always run a skirt so all this really does for me is make an extremely...
    Thread by: CarAudioFab, Nov 15, 2017, 2 replies, in forum: Troubleshooting
  17. CarAudioFab
    Post

    Simplify3d and RoboR2 with USB

    Thanks for the reply. Yeah i'd like to get rid of the priming line. Is there a write up for how to do that?
    Post by: CarAudioFab, Nov 13, 2017 in forum: Software
  18. CarAudioFab
    Thread

    Simplify3d and RoboR2 with USB

    Hey all, I'd like to use my RoboR2 purely with a USB. I'll be using Simplify3d to export gcode to a USB. A few questions: Simplify3d now has a...
    Thread by: CarAudioFab, Nov 13, 2017, 7 replies, in forum: Software
Showing results 1 to 18 of 18
Search Again