1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
Page 1 of 2
  1. Greg Howard
    Post

    Solved First few layers not printing correctly

    Just printed a new part, it does not have that weird fillet. I can fine tune the offset a bit more and get it near perfect. Fixed! Again,...
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  2. Greg Howard
    Post

    Solved First few layers not printing correctly

    I changed the offset to 0.5 and it appears to make a big difference. Ok, very big difference between the old and new settings. [ATTACH]
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  3. Greg Howard
    Post

    Solved First few layers not printing correctly

    What does the M565 z-10 offset do? does a '-' bring the nozzle up or down?
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  4. Greg Howard
    Post

    Solved First few layers not printing correctly

    First 2 layers after firmware corrected/updated. Same issue. Here is my gcode for the printer: Start (I added the Z5 because the extruder would...
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  5. Greg Howard
    Post

    Solved First few layers not printing correctly

    First print test of the simple stl failed again... Starting to feel like I'm in the "Office" movie. Running the file through the stl file fixer...
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  6. Greg Howard
    Post

    Solved First few layers not printing correctly

    Firmware now reads version 2 in MatterControl. Feeling better about the update. I am not sure why the MatterControl Hex update did not work, I...
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  7. Greg Howard
    Post

    Solved First few layers not printing correctly

    Oops, posted on the wrong thread. Posting here again in case someone encounters the same issue in the future. Mark, thanks for the link, found...
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  8. Greg Howard
    Post

    Answered Arduino problems (again )

    Looks like that did the trick to upload the firmware. https://github.com/MarlinFirmware/Marlin/issues/1083 from Github: -----snip----- I have...
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  9. Greg Howard
    Post

    Solved First few layers not printing correctly

    I got an error uploading. Arduino: 1.6.12 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)" C:\Program Files...
    Post by: Greg Howard, Jan 5, 2017 in forum: Troubleshooting
  10. Greg Howard
    Post

    Solved First few layers not printing correctly

    I'm thinking I messed up my firmware in some way. Although I think I used the right file, maybe something went wrong with the update. How can I...
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  11. Greg Howard
    Post

    Solved First few layers not printing correctly

    Attached
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  12. Greg Howard
    Post

    Solved First few layers not printing correctly

    I am using the 1+ firmware from this link: http://guide.robo3d.com/Wiki/ROBO_3D_Firmware_Release_Notes The firmware V2 for the Robo R1+ firmware....
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  13. Greg Howard
    Post

    Solved First few layers not printing correctly

    I have the 1+
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  14. Greg Howard
    Post

    Solved First few layers not printing correctly

    First and second layers. 2nd layer is definitely an issue. [ATTACH]
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  15. Greg Howard
    Post

    Solved First few layers not printing correctly

    Supper crappy 2nd layer, but top layer looks like there is too much extrusion, material being pushed to the sides making a wider edge....
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  16. Greg Howard
    Post

    Solved First few layers not printing correctly

    Hatchbox, PLA Grey 1.75 I just updated the firmware through MatterControl, 'after' the recent software update, 'and' the .net MS update that...
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  17. Greg Howard
    Post

    Solved First few layers not printing correctly

    This is killing me slowly. I still can't figure out what is making this print like this. I took the stl file and had a buddy print it, printed...
    Post by: Greg Howard, Jan 4, 2017 in forum: Troubleshooting
  18. Greg Howard
    Post

    Solved First few layers not printing correctly

    Still not printing right. My money is on firmware next. Gotta look up how to update the firmware.
    Post by: Greg Howard, Dec 9, 2016 in forum: Troubleshooting
  19. Greg Howard
    Post

    Solved First few layers not printing correctly

    I did not run the stl file through the fixer, I did and printed again with the same issue. I think it may have to do with the extruder. Not sure...
    Post by: Greg Howard, Dec 9, 2016 in forum: Troubleshooting
  20. Greg Howard
    Post

    Solved First few layers not printing correctly

    I tried Cura with similar results. Any idea why the 2nd layer is not dropping down or smushed?
    Post by: Greg Howard, Dec 8, 2016 in forum: Troubleshooting
Showing results 1 to 20 of 37 Next >
Search Again
Page 1 of 2