1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
  1. Huski
    Post

    dead R2 power supply

    Any idea if I could run 2 x 12v PSU’s similar to the one in the R1 connected in series to get the 24v ? Those are easy to find ! Sent from my...
    Post by: Huski, Nov 8, 2017 in forum: Troubleshooting
  2. Huski
    Post

    dead R2 power supply

    Probably could given enough effort, everything I have found so far isn’t at least rated to the 9.2A of the original, but may be my best option....
    Post by: Huski, Nov 8, 2017 in forum: Troubleshooting
  3. Huski
    Thread

    dead R2 power supply

    Hi all, I have one of the Kickstarter R2’s and mid print the external power supply went bang and is no longer working. I have sent a support...
    Thread by: Huski, Nov 8, 2017, 5 replies, in forum: Troubleshooting
  4. Huski
    Post

    Print head clicking

    I have had a similar problem with my R2 and seem to have sorted it as follows.... first off, my issue only seems to happen when I have filament...
    Post by: Huski, Aug 12, 2017 in forum: Troubleshooting
  5. Huski
    Post

    R2 settings in S3D

    Many thanks, I will give that a try ! Sent from my iPad using Tapatalk
    Post by: Huski, Aug 1, 2017 in forum: Troubleshooting
  6. Huski
    Thread

    R2 settings in S3D

    Hi all, apologies if this has been asked before, but I can't seem to find any links to the topic. I have been using S3D with a R1 Plus and am now...
    Thread by: Huski, Jul 31, 2017, 2 replies, in forum: Troubleshooting
  7. Huski
    Post

    Partial Answer Does the Robo3D R1 Plus use a real arduino or a clone?

    I replaced the PCB USB with one of these https://www.ebay.co.uk/itm/332065235749 .... the soldering isn't too easy as the circuit board is double...
    Post by: Huski, Apr 22, 2017 in forum: Troubleshooting
  8. Huski
    Post

    Partial Answer Does the Robo3D R1 Plus use a real arduino or a clone?

    Mine has a genuine Mega 2560, although I don't know how typical that is. They are slightly modified with the USB port mounted to a small PC board...
    Post by: Huski, Apr 21, 2017 in forum: Troubleshooting
  9. Huski
    Post

    Solved Simplify3D auto levelling problems

    I did try to remove the parameters again to check and the problem returns .... doesn't make sense I know. I am just happy it is now working !...
    Post by: Huski, Apr 12, 2017 in forum: Troubleshooting
  10. Huski
    Post

    Solved Simplify3D auto levelling problems

    Thanks #WheresWaldo.... problem solved ! The S3D start gcode had a G28 command without any parameters.... I added X0 Y0 Z0 which was in the MC...
    Post by: Huski, Apr 11, 2017 in forum: Troubleshooting
  11. Huski
    Post

    Solved Simplify3D auto levelling problems

    #WheresWaldo, it doesn't seem to make a difference .... I have tried to reduce the Build Volume to ridiculous levels 100 x 100 x 200 , also no...
    Post by: Huski, Apr 11, 2017 in forum: Troubleshooting
  12. Huski
    Post

    Solved Simplify3D auto levelling problems

    Thanks, I will give that a try ! Sent from my iPad using Tapatalk
    Post by: Huski, Apr 11, 2017 in forum: Troubleshooting
  13. Huski
    Thread

    Solved Simplify3D auto levelling problems

    Hi All, apologies if there is already a thread dealing with this .... I can't find a solution and need some assistance please. (Robo R1 Plus) I...
    Thread by: Huski, Apr 11, 2017, 6 replies, in forum: Troubleshooting
  14. Huski
    Post

    Unresolved MKS tft 2.8 resume after power out

    Thanks .... I have been wanting to change the icons but am scared that I will screw up something else in the process. LOL Sent from my iPad...
    Post by: Huski, Mar 21, 2017 in forum: Troubleshooting
  15. Huski
    Post

    Unresolved MKS tft 2.8 resume after power out

    Thanks for the reply, a UPS would definitely be the way to go.... It would seem like a really cool function on the MKS if it actually worked 100%....
    Post by: Huski, Mar 21, 2017 in forum: Troubleshooting
  16. Huski
    Thread

    Unresolved MKS tft 2.8 resume after power out

    Hi All, I have been using the MKS touch controller exclusively to print on my R1plus. I generate a gcode on the computer and then print from a SD...
    Thread by: Huski, Mar 20, 2017, 4 replies, in forum: Troubleshooting
  17. Huski
    Post

    Unresolved Why arent prints centered

    Absolutely correct Geof, upon further investigation I have indeed lost a bit on build size by centering the print on the glass .... interestingly...
    Post by: Huski, Mar 20, 2017 in forum: Troubleshooting
  18. Huski
    Post

    Unresolved Why arent prints centered

    You can tweak Matter Control to print in the center of the bed .... PRINTER / PRINT AREA / Print Center ( mine set to 114 X 100 Y). I realise...
    Post by: Huski, Mar 20, 2017 in forum: Troubleshooting
  19. Huski
    Post

    ABS Share ABS print settings?

    After messing around for ages trying to get ABS to print properly, if for no other reason than I bought 2 rolls and am loathe to let them go to...
    Post by: Huski, Sep 19, 2016 in forum: Printing Filament
Showing results 1 to 19 of 19
Search Again