1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

bed moving from its place

Discussion in 'Troubleshooting' started by Rp7degirmenjian, Apr 8, 2018.

  1. Rp7degirmenjian

    Rp7degirmenjian New Member

    Joined:
    Mar 9, 2018
    Messages:
    2
    Likes Received:
    0
    hey guys!
    we are trying to print a small object, but whenever we try to print it the bed of the printer is moving and part of the bed is becoming puffy .
    what do you think the problem could be ?
     

    Attached Files:

    #1 Rp7degirmenjian, Apr 8, 2018
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    The picture on the left above is from the filament wanting to warp. It is lifting the bed liner (the black sticker) the C2 uses.
    If that is PLA you are either printing it a bit hot or it is just not great PLA :) By default PLA should not warp unless you run it too hot.

    The picture on the right looks like something shifted mechanically.
     
    #2 mark tomlinson, Apr 8, 2018

Share This Page