1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unanswered Bed won't heat, burned connector, what next?

Discussion in 'Troubleshooting' started by gartwo, Feb 27, 2021.

  1. gartwo

    gartwo New Member

    Joined:
    Aug 1, 2015
    Messages:
    6
    Likes Received:
    1
    Bed on my R1+ abruptly stopped heating. Guidance from an older post I found with the same issue led to me finding this burned connector. Can I simply replace the connector and solve the problem, or is this the result of a larger issue? Thanks in advance!

    [​IMG]
     
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,518
    Likes Received:
    7,304
  3. fred3d

    fred3d Member

    Joined:
    Jun 6, 2019
    Messages:
    34
    Likes Received:
    13
    Consider also to replace the corresponding connector on the mainboard. Two of the R1+ printers experienced this problem and the mainboard connectors were charred/corroded.
     

Share This Page