Californian Newbie

Just got my Robo3D for 2 weeks. Still playing with it to get the correct settings. Looking forward to meet with great peoples and projects on this forum

 

Hello welcome to the forum!

 

I got mine a few days ago and I am still playing with the settings

 

Try these settings in Matter Control

Robo3d settings

Using Matter Control
Layer height 0.2046 or 0.246
First layer 0.3
Parameters 6
Top layer 5
Bottom 5
Generate extra parameters when needed
Start at non overhang
Thin walls
External parameters first

Infill 0.3
Infill every 1
Only infill when needed
Fill pattern Rectilinear
Top/Bot fill Rectilinear
Infill every 1 layer
Only infill when needed
Solid infill every 0 layers
Starting angle 45
Solid infill threshold 70

Speed
Everything at 50 except
Outside perimeter 70%
Gap fill 45
Min print speed 30
Travel 125
First layer speed 50%

Skirt and Brim
Loops 2
Distance 6
Skirt height 2
Non extrusion length 1
Brim 0

Support
Overhang 89
Enforce support 0
Raft 2 layers

Options
Pattern Rectilinear
Pattern spacing 2.5
Starting angle 0
Interface layers 3
Interface spacing 0
Z gap 1

Output options
Wipe 0
Adv first layer 150%

Flow
Bridge flow 1

Other
Threads 2
Res 0
Extrusion axis E
Optimize overhangs

Filament
Diameter 1.75
Ext multi 1
Ext first layer 190
Ext temp 190
Bed first layer 55
Bed temp 0

Printer
Bed size 228.6 x 254
Print centre 114.3 x 127
Build height 203.2
Z offset 0
Bed shape rectangular
Firmware reprap

Extruder
Nozzle 0.4
Ext offset 0

Retract
Length 1
Change tool 10
Z lift 0.12
Speed 35
Extra length 0
Min travel 2
Retract on layer change
Retraction when disabled 10
Extra length 0

Everything I posted should be entered. If I did not post it, leave it unchecked or at default.



Sent from my iPhone using Tapatalk in Canada