1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Connection Interrupted

Discussion in 'Troubleshooting' started by studiver13, Dec 22, 2019.

Thread Status:
Not open for further replies.
Page 3 of 3
  1. studiver13

    studiver13 New Member

    Joined:
    Dec 28, 2017
    Messages:
    22
    Likes Received:
    8
    I was able to get to the drive by following this post: http://community.robo3d.com/index.php?threads/robo-c2-image-download-link.17955/

    I then downloaded the r2_2.0_replace.zip image, installed it onto the microSD and flashed the new firmware.

    After some small issues of disconnecting the touch screen on accident.... I was able to set the Z-offset for the first time in who knows how long!

    Time for my first test print....
     
    #41 studiver13, Dec 26, 2019
    Last edited: Dec 26, 2019
  2. studiver13

    studiver13 New Member

    Joined:
    Dec 28, 2017
    Messages:
    22
    Likes Received:
    8
    #42 studiver13, Dec 26, 2019
    tkoco and mark tomlinson like this.
  3. tkoco

    tkoco - -.- --- -.-. ---
    Staff Member

    Joined:
    May 7, 2018
    Messages:
    721
    Likes Received:
    273
    Now that you have your printer working... Merry Christmas!

    And take time to create a backup of the SDcard image to save all the settings - just in case the SDcard goes bad.

    Also, take time to level the bed properly so that you won't be forced to use the "raft" adhesion.
     
    #43 tkoco, Dec 26, 2019
    studiver13 and mark tomlinson like this.
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338

    This is 100x more important than anything else you can do :)
     
    #44 mark tomlinson, Dec 26, 2019
    studiver13 likes this.
Page 3 of 3
Thread Status:
Not open for further replies.

Share This Page