Cura 2.5 for R2...

Hello all
I have the R2 and finally got cura to connect to printer.
but i am having issues trying to change the temperature settings. i tried to do it on the printer itself on the touch screen but don't seem to stick. so i tried doing it thru cura and it wont let me change it. its set for 200 for nozzle and 60 for bed. and should i use cura or use matter control? Oh Teh.. the R2 setting on it itself is set to 230 and i dont know how to change it for PLA .

 

have you tried changing it through the settings on octopi for the touchscreen temps? its name on your network should be the name on your s/n tag on the back of the printer (if you set up wifi or connected an ethernet cable). You should definitely use Cura - matter control is only for the older R1 and R1+ to my knowledge. to change the print temps in Cura go to the material dropdown->Manage Materials->PLA->Print settings and you can change the temps there.