1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Does anyone have the lead screw upgrade instructions? [Solved]

Discussion in 'Mods and Upgrades' started by SoLongSidekick, Feb 27, 2019.

  1. SoLongSidekick

    SoLongSidekick Active Member

    Joined:
    Mar 6, 2014
    Messages:
    220
    Likes Received:
    68
    The original link is broken and I was told by Robo3D support that they somehow don't have them anymore. They actually told me to try Googling it. I don't know why I did, with so many community versions that use slightly different setups, but of course that returned nothing.

    I've actually got my upgrade most of the way installed. I might be missing just the last few steps. If you have these instructions saved I would really appreciate getting my eyes on them. Thanks.
     
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,138
    Likes Received:
    6,997
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,138
    Likes Received:
    6,997
    If you want just the instructions to the original set they provided then -- let me know I might be able to find those

    They are not online any longer (there used to be a scanned set)
    However I can maybe find and scan a set myself. Not going to swear that I still have them, but I can look
     
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,138
    Likes Received:
    6,997
    They were not really all that complicated at any rate.
    The instructions for the generic set will pretty much cover it:

    However if you have any questions around that. let me know. I will go out later today and see if I can find the paperwork for the original one.
     
  5. SoLongSidekick

    SoLongSidekick Active Member

    Joined:
    Mar 6, 2014
    Messages:
    220
    Likes Received:
    68
  6. SoLongSidekick

    SoLongSidekick Active Member

    Joined:
    Mar 6, 2014
    Messages:
    220
    Likes Received:
    68
    If you can find them that would be awesome. I have no idea if I actually finishes or if I left some small detail undone.
     
  7. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,138
    Likes Received:
    6,997
    You have no idea how lucky you are. You should have bought a lotto ticket, but no, you wanted these :)

    Look for the PDF here: https://1drv.ms/f/s!AuA8_x0YgChA7EedkZpQ4mGOnL1_

    and sorry, the pages were a bit wrinkled scanned them as good as I could
     
  8. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,138
    Likes Received:
    6,997
    at least they are now scanned for posterity ;)

    And I added it to the files section of the Robo3D facebook group.
     
  9. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,561
    Likes Received:
    2,264
    Man look at that blast from the past ! Lol how crazy that you still have them !
     
  10. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,138
    Likes Received:
    6,997
    They were shoved in a box with the parts that came off of the printer (old bed a drawer rails) and had worked its way around the piles of stuff from all the remodeling until it landed in the workshop under a table. Next stop would have been -- the bin.
     
    Geof likes this.
  11. SoLongSidekick

    SoLongSidekick Active Member

    Joined:
    Mar 6, 2014
    Messages:
    220
    Likes Received:
    68
    You are freaking unbelievable. Thank you so much.
     
    Geof likes this.
  12. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,138
    Likes Received:
    6,997
    They pay me extra for that service (3x0 = 0)

    ;)

    You are welcome.
     

Share This Page