1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Partially Solved extrusion problem

Discussion in 'Troubleshooting' started by felipe fomez, Aug 18, 2017.

  1. felipe fomez

    felipe fomez Member

    Joined:
    May 19, 2015
    Messages:
    42
    Likes Received:
    0
    For some reason there seems to be gaps in extrusion. Cleaned nozzle and changed many times. But keeps leaving gaps .
     

    Attached Files:

    #1 felipe fomez, Aug 18, 2017
  2. felipe fomez

    felipe fomez Member

    Joined:
    May 19, 2015
    Messages:
    42
    Likes Received:
    0
    More pics
     

    Attached Files:

    #2 felipe fomez, Aug 18, 2017
  3. felipe fomez

    felipe fomez Member

    Joined:
    May 19, 2015
    Messages:
    42
    Likes Received:
    0
    Parts of the lines keep skipping while laying down lines on each layer
     

    Attached Files:

    #3 felipe fomez, Aug 18, 2017
  4. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    Have you calibrated your extruder, it appears to be severely underextruding
     
    #4 WheresWaldo, Aug 18, 2017
    Geof likes this.
  5. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    @WheresWaldo is right, try that first. If this is PLA try seasoning and check for a partial clog as well.
     
    #5 mark tomlinson, Aug 18, 2017
    Geof likes this.

Share This Page