1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

filament to use

Discussion in 'Printing Filament' started by Kevin Allan, May 2, 2017.

  1. Kevin Allan

    Kevin Allan New Member

    Joined:
    May 1, 2017
    Messages:
    4
    Likes Received:
    0
    Hey guys which filament is the best to use for wood and metal since i have this project and im checking out
    which site to buy the filament
     
  2. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    IMO, I'd go Hatchbox or Colorfabb.

    Sent from my Galaxy S7 using Tapatalk
     
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,658
    Likes Received:
    7,316
    ColorFabb or Taulman are the top of the line.
    Hatchbox is a good second/third on the list.
     
    aznhlfan likes this.
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,658
    Likes Received:
    7,316
    The only thing I would suggest is to buy from an authorized reseller or direct.
    Too often people buy from someone who is not an actual reseller and while ColorFabb and Taulman will make it right if you have issues with the filament Hatchbox and some of the others are going to insist you got it from a reseller since there apparently a number of fakes out there.
     
  5. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    I get all my filament from Printed Solid.

    Sent from my Galaxy S7 using Tapatalk
     
    mark tomlinson likes this.

Share This Page