1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Firmware update troubles

Discussion in 'Troubleshooting' started by Patrick Ryan, Aug 20, 2016.

Page 2 of 2
  1. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    Libraries can and eventually end up in libraries, whether you put them there or install from ZIP files (either in the IDE installation directory or in the Documents/Arduino/libraries). If you are running under Windows, the default is the best place which would be Documents/Arduino/your files here.
     
    #21 WheresWaldo, Aug 20, 2016
    Geof likes this.
  2. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    Thank you! Ill modify my approach
     
    #22 Geof, Aug 20, 2016
  3. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    It just makes things easier to find for the IDE, helps eliminate errors like not finding the U8glib, etc. Besides it will be asier to answer other people's questions if your setup is about the same as most default installations.
     
    #23 WheresWaldo, Aug 20, 2016
    Geof likes this.
  4. Patrick Ryan

    Patrick Ryan Member

    Joined:
    Aug 6, 2016
    Messages:
    83
    Likes Received:
    23
    To fix my issue was to not install version 2 and use version 1 change my settings for the lcd screen. I also had the wires crossed on my screen
     
    #24 Patrick Ryan, Aug 20, 2016
    WheresWaldo, danzca6 and Geof like this.
Page 2 of 2

Share This Page