1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved Flexible TPU issue

Discussion in 'Troubleshooting' started by David Avila, Mar 16, 2016.

Thread Status:
Not open for further replies.
  1. David Avila

    David Avila Member

    Joined:
    Mar 16, 2016
    Messages:
    69
    Likes Received:
    5
    I have a issue with my prints using TPU it prints but looks like there holes inside the print speed for infill at 30mm inside and outside perimeter 30mm temp 220 and 55 for bed, thanks
     
    #1 David Avila, Mar 16, 2016
  2. David Avila

    David Avila Member

    Joined:
    Mar 16, 2016
    Messages:
    69
    Likes Received:
    5
    [​IMG]
     
    #2 David Avila, Mar 16, 2016
  3. Ocsff

    Ocsff Active Member

    Joined:
    Oct 28, 2014
    Messages:
    135
    Likes Received:
    40
    I print at 20mm/sec and 230 nozzle temp and get good results. Also have the piece of bowdan tube insert.
     
    #3 Ocsff, Mar 17, 2016
  4. athlonduke

    athlonduke New Member

    Joined:
    Jul 13, 2017
    Messages:
    6
    Likes Received:
    0
    that honestly looks like wet filament. dry it out
     
    #4 athlonduke, Oct 26, 2020
  5. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    4 year old thread ... I imagine they have sorted it now.
     
    #5 mark tomlinson, Oct 27, 2020
Thread Status:
Not open for further replies.

Share This Page