1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Has anyone used high tenacity 3d printer resin？

Discussion in 'Filament' started by syrial, May 28, 2023.

  1. syrial

    syrial New Member

    Joined:
    Oct 8, 2022
    Messages:
    2
    Likes Received:
    0
    #1 syrial, May 28, 2023
    Last edited: Jun 6, 2023
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Yes. Nice thing is that you can add flexible resin to other resin of the same type and it will be more flexible than the default for that resin and not as flexible as the full-on flex resin. You can custom mix & match for the amount of flex you want and essentially make the print tougher.
     
    #2 mark tomlinson, May 28, 2023
  3. matthew2023

    matthew2023 New Member

    Joined:
    Jul 31, 2023
    Messages:
    6
    Likes Received:
    1
    I want to 3D print .
     
    #3 matthew2023, Jul 31, 2023
  4. Morant

    Morant New Member

    Joined:
    Aug 22, 2023
    Messages:
    4
    Likes Received:
    1
    The one you mentioned is water washable resin from Sunlu. Prints made with this resin can achieve high detail down to 35-50 microns resolution, which may meet your needs.The resin can be cleaned off printed parts by washing with water instead of using alcohol or other cleaning agents, which makes post-processing much easier.
     
    #4 Morant, Sep 6, 2023
    Last edited: Sep 6, 2023
    mark tomlinson likes this.
  5. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    You can also blend tenacity with other non-flexible resin to make one as stiff or flexible as you want (some experimentation is required)
     
    #5 mark tomlinson, Sep 7, 2023

Share This Page