1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

I dare someone to print this...

Discussion in 'Projects' started by Red Submarine, Feb 8, 2015.

  1. Red Submarine

    Red Submarine Active Member

    Joined:
    Mar 12, 2014
    Messages:
    130
    Likes Received:
    39
    http://www.thingiverse.com/thing:560419

    Is anyone up for a challenge?

    It's without a doubt the most intensive file(s) I have ever considered printing. 42 different pieces in all, although this is one of those rare models that has actually been designed to be printed. Each piece has supports and minimal if any extreme overhangs. I think it could be done fairly easily but would take forever to print each piece. I just thought I would share.
     
    3 people like this.
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    22,570
    Likes Received:
    7,230
    I totally would, but then my GSXR or my Ninja would do something evil to me.
     
  3. Red Submarine

    Red Submarine Active Member

    Joined:
    Mar 12, 2014
    Messages:
    130
    Likes Received:
    39
  4. Mike Glass

    Mike Glass Active Member

    Joined:
    Dec 29, 2014
    Messages:
    268
    Likes Received:
    123
    I almost have all the pieces done. Now just got to figure how it goes together.

    [​IMG]
     
    2 people like this.
  5. Red Submarine

    Red Submarine Active Member

    Joined:
    Mar 12, 2014
    Messages:
    130
    Likes Received:
    39
    That is awesome. How long did it take to print it all? Also related, I'm curios what speed you printed at and what size nozzle you used. That detail is impressive. Well done
     
    #5 Red Submarine, Feb 11, 2015
    Last edited by a moderator: Feb 11, 2015
  6. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,275
    holy crap mike o_O How did you print that chain?
     
  7. Mike Glass

    Mike Glass Active Member

    Joined:
    Dec 29, 2014
    Messages:
    268
    Likes Received:
    123
    ABfnS with a fan, actually all the parts in black are abs and with the fan on.
     
  8. Mike Glass

    Mike Glass Active Member

    Joined:
    Dec 29, 2014
    Messages:
    268
    Likes Received:
    123
    I have the hex with .4, everything is printed in .2 layer, 20% infill, speed(default in MC) I think 60, never bothered with speed until I went to Cura. The black is abs, Red and Silver are pla. I write down all my settings, just need to get them in a spreadsheet.
     
  9. janot928

    janot928 Active Member

    Joined:
    Feb 20, 2015
    Messages:
    276
    Likes Received:
    40
    how big are the prints ???
    nice prints man good job
     

Share This Page