1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Is this possible?

Discussion in 'General Questions' started by Hp0106, Mar 2, 2016.

  1. Hp0106

    Hp0106 Member

    Joined:
    Feb 28, 2016
    Messages:
    31
    Likes Received:
    7
    Hello I'm trying to put put 2 print cooling fans on my R1+. I noticed the stock fan uses .16 amps and my 2 new fans have a combined total of .36 amps. I was wondering if this could cause any problems. Any replies are appreciated
     
    #1 Hp0106, Mar 2, 2016
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Not likely.
     
    #2 mark tomlinson, Mar 3, 2016
  3. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,276
    You'll be fine running 2 fans off the controlled circuit. I was using significantly more before I started running into tripping errors on the polyfuse.
     
    #3 Mike Kelly, Mar 3, 2016
  4. Hp0106

    Hp0106 Member

    Joined:
    Feb 28, 2016
    Messages:
    31
    Likes Received:
    7
    Thanks for the information I was worried about damaging the electronics but now I'm willing to proceed with my upgrades. Have a good day everyone
     
    #4 Hp0106, Mar 3, 2016

Share This Page