1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Just a test print with e3d 3mm hotend and ABS (no heated bed) 0.3mm res

Discussion in 'Off Topic' started by BjG, Sep 3, 2013.

  1. BjG

    BjG Member

    Joined:
    Feb 23, 2013
    Messages:
    38
    Likes Received:
    21
    Just posting this to ack that the e3d hotend is working

    e3d hotend

    3mm white ABS

    printed with 0.3 mm resolution

    215 degrees centigrade

    using blue painters tape (from biltema)

    [​IMG]

    this print was with "old" fan and lifted a bit in the left "tap"

    with upgraded 40 mm fan another larger print i made did not lift (old fan made noise like f***, probably defunct)

    currently printing fan adapter for 40 mm fan:

    [​IMG]
     
  2. BjG

    BjG Member

    Joined:
    Feb 23, 2013
    Messages:
    38
    Likes Received:
    21
    Truerobotech likes this.

Share This Page