1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

print quality is gone

Discussion in 'Troubleshooting' started by BJS227, Aug 10, 2020.

  1. BJS227

    BJS227 Member

    Joined:
    Sep 19, 2017
    Messages:
    42
    Likes Received:
    7
    Check out the pic. Does anyone what would cause the printer quality to look so bad? Just overnight it did this. Thoughts? TIA!
     

    Attached Files:

    • PIC.jpg
      PIC.jpg
      File size:
      386.4 KB
      Views:
      10
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,477
    Likes Received:
    7,303
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,477
    Likes Received:
    7,303
    Once you have the versions of RoboOS and the firmware correct per the FAQ entry -- DO NOT Update them any more...
     
  4. tkoco

    tkoco - -.- --- -.-. ---
    Staff Member

    Joined:
    May 7, 2018
    Messages:
    691
    Likes Received:
    262
    @mark tomlinson , A great article, Sir. @BJS227 , The article is about getting the Z axis height correct. Bed leveling is about getting that same height across the entire print bed surface. You can read the bed leveling procedure posted at the start of the R2 Troubleshooting area.
     
    mark tomlinson likes this.

Share This Page