1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

problem with robo OS2.0

Discussion in 'Troubleshooting' started by J0ester, Mar 23, 2018.

  1. J0ester

    J0ester New Member

    Joined:
    Jul 14, 2017
    Messages:
    20
    Likes Received:
    0
    hi any one having this problem when printing is start i receive an error msg. at this two point . but after reset it i can print normally..:(
     

    Attached Files:

  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,981
    Likes Received:
    7,116
    Normally it is the pogo pins on the V1 bed failing.
    It could be either of the heaters failing, but it is almost always the bed failing because the connection is getting broken.
     
  3. J0ester

    J0ester New Member

    Joined:
    Jul 14, 2017
    Messages:
    20
    Likes Received:
    0
    this always happen when i on my printer and done my first print..
     

Share This Page