1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved quick stupid question.

Discussion in 'Troubleshooting' started by robert albrecht, Feb 23, 2019.

  1. robert albrecht

    robert albrecht Member

    Joined:
    Dec 24, 2018
    Messages:
    103
    Likes Received:
    16
    When I use the home button to return the print bed and extruder to it's starting point. Both switches for up and down (y?) should be compressed correct? I am still learning the lingo... LOL
     
    #1 robert albrecht, Feb 23, 2019
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    You can home it whenever it is not printing. Not sure which buttons you are referring to -- if you have the touchpad or one of the LCDS it will likely be different on the R1

    Maybe a picture will help :)
     
    #2 mark tomlinson, Feb 24, 2019
  3. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    If you are speaking of the switches under the left and right side X Axis carriage, then yes, they should be compressed. Otherwise the printer never knows where Z0 is.
     
    #3 WheresWaldo, Feb 24, 2019
  4. robert albrecht

    robert albrecht Member

    Joined:
    Dec 24, 2018
    Messages:
    103
    Likes Received:
    16
    That's what I thought.. thanks

    Sent from my SM-G950U using Tapatalk
     
    #4 robert albrecht, Feb 25, 2019

Share This Page