Partial Answer R1 print problems

Hey all,


I've just been given an old Robo3D. The guy who gave it to me started having some problems with it and decided to get a Prusa instead of fixing it up. I'm really new to this whole thing so I'm not really sure what this means. Here is a link to my last print Robot print problems.


Some things to note:

* One of the Y belt clips broke, I have printed a new one

* The back part that the bed sits on(not sure what it's called) was cracked, so I have printed a new one of those. The magnets have fallen off of the bed at all but one corner, I am using clips to hold the bed in place

* If I tug gently on a side of the bed, the right side seems to have less friction (hence why I've printed a new Y axis bearing housing. Immgoing to start using copper brushes)

* I am using S3D. 0.2mm layer height. 205/65 for the temps.


Please let me know if anything I have mentioned may be causing the issue. Also, shout if there is anything else you might need to know.

EDIT: I'm new so I cant link to the Imgur album. Here are the images

 

Where did you find the STL files for these parts?

 

Lol, I still cant post links, but search for y-axis-bearing-alternative in Google and it will bring you to a thread in this forum