1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

reprapdiscount LCD display

Discussion in 'Mods and Upgrades' started by Printed Solid, Jul 26, 2013.

  1. Robert Choban

    Robert Choban Active Member

    Joined:
    Aug 22, 2014
    Messages:
    279
    Likes Received:
    27
    SteveC thanks for your help
    what do you mean when you say PM you my contact info? Should I post my e-mail address here or is there some other way we can move off this forum to a one on one conversation?
    Also I'm having some problems printing ever since I upgraded to the newest version of Robo software? It looks like that lays are being squished. My question for now is where on the forum would you post a problem like this. Once I know the place to post I will upload some pictures of what is happening.
    Thanks again for all your help.
     
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,957
    Likes Received:
    7,344
    There is a conversations button at the top right-hand corner of the HTML page for the forum. Try that and start a private conversation with the specific user(s) you want.
     
  3. Galaxius

    Galaxius Well-Known Member

    Joined:
    Jan 18, 2014
    Messages:
    632
    Likes Received:
    342
    My Full Graphic display arrived the other day but I noticed the securing tabs for the LCD touch the pins below (see pic). Since they appear to be metal I'm thinking I need to bend them flat out of the way and insert some insulator? @Ziggy

    [​IMG]
     
  4. Ziggy

    Ziggy Moderator
    Staff Member

    Joined:
    Feb 20, 2013
    Messages:
    707
    Likes Received:
    530
    Not all the pins are used. But would be best to use some insulation and/or bend the metal out of the way.
     
    2 people like this.
  5. deeph

    deeph Member

    Joined:
    Oct 12, 2014
    Messages:
    94
    Likes Received:
    15
    Going to take Graphic LCD but are there any change needed to my Robo3D V3?
     
  6. SteveC

    SteveC Well-Known Member

    Joined:
    Jun 12, 2013
    Messages:
    894
    Likes Received:
    316
    I'm sure you know this but remember to insert some printed spacers/washers between the module and the PCB before screwing it into the case.
     
  7. Galaxius

    Galaxius Well-Known Member

    Joined:
    Jan 18, 2014
    Messages:
    632
    Likes Received:
    342
    Thanks, I didn't know that. Was going to use this case from thingiverse. Is there a guide or hints n tips link for installing the full graphic lcd?
    http://www.thingiverse.com/thing:87250
     
  8. SteveC

    SteveC Well-Known Member

    Joined:
    Jun 12, 2013
    Messages:
    894
    Likes Received:
    316
    Yes, it looks to me like it is the same mechanical configuration as the other LCD controllers and the two boards are only connected on one side by one strip of connections. If you don't put spacers in the two boards will squish together when you tighten the screws into the case and they will bend and probably short out. You can put your own insulating washers in or you can print some from the distance_cylinder.stl in this design:
    http://www.thingiverse.com/thing:79820/#files
     
    #228 SteveC, Oct 18, 2014
    Last edited by a moderator: Oct 18, 2014
  9. Bjorn

    Bjorn Member

    Joined:
    Aug 29, 2014
    Messages:
    77
    Likes Received:
    74
    Wanted to let you know, I did a remake of that case..
    Pulling the SD card out was a pain in the ass for my thick fingers :), I solved it by making a slot into the case.
    http://www.thingiverse.com/thing:505355
     
    2 people like this.
  10. John Durr

    John Durr Member

    Joined:
    Oct 12, 2014
    Messages:
    64
    Likes Received:
    11
    Hello
    I'm really new to this whole 3d printing thing. But I bough the xxl screen from printed solid. I just got my Robo 3d on 10/13/14.
    When I turn on printer I get a message to Home x/y before z. Can someone PLEASE point me to somewhere that might explain this?
    I have a mac running 10.10 but have connection issues so I wanted to print without computer.
    Thanks
    John
     
  11. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,278
  12. John Durr

    John Durr Member

    Joined:
    Oct 12, 2014
    Messages:
    64
    Likes Received:
    11
    Thanks Mike
    My firmware states RoBo3DR1AUTOV1.
    When I go to Auto home I see no all
    When I press the button (push knob in) the extruder moves to the left edge then forward then back to the center. The screen goes back to the info window.
    Is that what you mean by "Do auto-home all."?
     
  13. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,278
  14. John Durr

    John Durr Member

    Joined:
    Oct 12, 2014
    Messages:
    64
    Likes Received:
    11
    No it is not

    So I learning something. If I hit restore failsafe I must hit Auto home afterward.
    Thanks

    Now on to leveling x axis.

    I will search forum for help.

    Thanks Mike and when I get this working I will be using you swivel case for the screen so thanks for that as well.
     
  15. SteveC

    SteveC Well-Known Member

    Joined:
    Jun 12, 2013
    Messages:
    894
    Likes Received:
    316
    John, to level X just turn either the right or left Z coupler by hand until the nozzle has the same gap on both sides. It takes a few iterations back and forth but you should only have to do this once. You need to do this while the Z steppers are off or they will resist moving.
     
  16. Robert Choban

    Robert Choban Active Member

    Joined:
    Aug 22, 2014
    Messages:
    279
    Likes Received:
    27
    I have a Robo R1 with enclosed bottom, a hexagon hot end and a XXL controller. Been printing for about 1 week with no problems. I had a problem with the Hot end fan coming lose during a print, I push the terminate print botton on the XXL and the turned off the printer, the print stopped. I push the fan back onto the heat sink and turned on the printer. When I look at the XXL controller there is a Err: MINTEMP message at the bottom of the Info screen. The hot end and the bed will not heat up. When looking at the XXL, under Control, then under Temperature, then under autotemp, my min temp is set to 180, max temp is 225. Any help would be greatly appreciated
     
  17. John Durr

    John Durr Member

    Joined:
    Oct 12, 2014
    Messages:
    64
    Likes Received:
    11
    When I had any problems I also had to unplug the sub going to the printer to clear the error message.
    If the computer was turned on at the time of error.
    The board might get power from both use and the power supply.
     
  18. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,278
    When you restart the printer what do your temperatures show up as
     
  19. deeph

    deeph Member

    Joined:
    Oct 12, 2014
    Messages:
    94
    Likes Received:
    15
    Just got Graphic LCD but mine can't exceed 240c, how do I increase the max temp for the LCD?
     
  20. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,278
    Max temp is a function of your firmware. You need to flash your firmware with a higher max temp
     

Share This Page