1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Temp too hot at start

Discussion in 'Troubleshooting' started by Alvin Dantes, Oct 11, 2021.

  1. Alvin Dantes

    Alvin Dantes New Member

    Joined:
    Sep 24, 2021
    Messages:
    1
    Likes Received:
    0
    I'm printing PLA, and all my prints start at 230 before coming down to 190. This creates a lot of stringy, blobby filament. I can pause at the start so that the extruder has time to get down to temperature, but how do I fix this permanently? I saw another thread mention that this is in the gcode of Octoprint scripts to preheat the extruder to 230, but what do I have to edit to make it not that? The other thread wasn't very specific. Thanks!
     
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,477
    Likes Received:
    7,303
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,477
    Likes Received:
    7,303
    The script in OctoPrint will be fairly long but look for the preheat commands.
     

Share This Page