1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Was Thinking of selling original Prusa i3 MK2 Not Anymore

Discussion in 'Off Topic' started by aznhlfan, Mar 27, 2017.

  1. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    It's done, here is a pic of the top and bottom.[​IMG][​IMG]

    Sent from my LG V20 using Tapatalk
     
  2. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    Looks pretty good ! Looks like the first layer is a bit to close but thats easily fixed.

    Its a deprime. Good for test prints. Fast and has alot more to it than a cube :D
     
  3. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    Might be a smidge hot to but also easily fixed
     
  4. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    The deprime printed at 195°, I don't want to mess with the slicer settings and f**k things up.

    Sent from my LG V20 using Tapatalk
     
  5. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    If it's anything like Cura, there are things that I have no idea what they do, lol

    Sent from my LG V20 using Tapatalk
     
  6. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    Gotya. Well im glad you got it printing
     
  7. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    Yes, thanks. Now I hope I don't screw something up in the settings

    Sent from my LG V20 using Tapatalk
     
  8. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    I doubt that you will. IMO you will need to change the temperature and layer heights, but the rest are pretty tuned in for general use with the MK2.

    Write down your settings, take screen shots...whatever you have to do but dont be afraid to make changes :D If you dont make changes you wont know if its better or worse.
     
  9. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    You think cooler than 195 degrees? and the layer height is 2 mm, even lower?
     
  10. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    I cant tell you what temperature to print at, only to test. raise the hotend up, heat and extrude 100 mm at 190, does it do it ok? Then you should be able to print at that temperature
     
    mark tomlinson likes this.
  11. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    I'm going to print a 20mm calibration cube when I get home from work.

    Sent from my LG V20 using Tapatalk
     
  12. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    22,570
    Likes Received:
    7,229
    Excellent idea and it works well for normal filaments (ABS, PLA, some others -- not nylon). Quick and easy to do and gets you close to perfect. If those filaments stick to the nozzle when you do this then you are extruding too hot.
     
    Geof likes this.
  13. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    99% of the time I print with PLA anyway.

    Sent from my LG V20 using Tapatalk
     
  14. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    Does the Prusa edition of slic3r repair the .stl files?

    Sent from my LG V20 using Tapatalk
     
  15. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    I dont think so. I use netfabb if I have a broken file
     
  16. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    Yea, that's what I use, but it turns it into a .3mf or something.

    Sent from my LG V20 using Tapatalk
     
  17. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    22,570
    Likes Received:
    7,229
  18. daniel871

    daniel871 Well-Known Member

    Joined:
    Apr 18, 2015
    Messages:
    1,322
    Likes Received:
    510
    Just use this:

    https://makeprintable.com/
     
  19. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    I tried printing my own print I designed, I print it all the time on the R1 +, 1 and 19 mins in the Prusa got to 100% and stopped, not even close to being done. Usually take 3 hours on the R1+. Why did this happen, it was printing so good.[​IMG][​IMG]

    Sent from my LG V20 using Tapatalk
     
  20. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    Nozzle jam? Any error on the lcd?
     

Share This Page