1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Y-axis not moving

Discussion in 'Troubleshooting' started by JeffW, Dec 20, 2018.

  1. JeffW

    JeffW New Member

    Joined:
    Dec 20, 2018
    Messages:
    1
    Likes Received:
    0
    My Y-axis is not moving. It will not move when trying to manually jog the axis or when trying to home the unit. I swapped the x and y axis cables on the board. the y axis will not humm with slight click but will not move. the x-axis will not do anything. I believe it is the board. Any thoughts?
     
  2. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    Contact Robo directly, it sounds like the mainboard to me to. No one on this forum is a Robo employee, we are all volunteers that try to keep the forum clean from spam and answer what questions we can.
     
    mark tomlinson likes this.
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Yep, if this is an R2 then it is almost certainly the main board.
     
    Geof likes this.

Share This Page