1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Recent Content by GooBazooka

  1. GooBazooka
    Post

    Partially Solved X-Axis Shifting Arbitrarily

    The print turned out great but as good as that is for me in the short term, it's the long term implications that I have a problem with. Why did...
    Post by: GooBazooka, Aug 31, 2016 in forum: Troubleshooting
  2. GooBazooka
    Post

    Partially Solved X-Axis Shifting Arbitrarily

    Weird thing happened: I switched the X and Y stepper drivers and the print is going smoothly....too smoothly... Only an hour into the print so...
    Post by: GooBazooka, Aug 30, 2016 in forum: Troubleshooting
  3. GooBazooka
    Post

    Partially Solved X-Axis Shifting Arbitrarily

    Something I forgot to mention is the heat generated by the original stepper. It wasn't too hot to touch but it seemed hotter than it should be. I...
    Post by: GooBazooka, Aug 30, 2016 in forum: Troubleshooting
  4. GooBazooka
    Post

    Partially Solved X-Axis Shifting Arbitrarily

    Has there been an issue like this before? Could it be voltage/current related?
    Post by: GooBazooka, Aug 30, 2016 in forum: Troubleshooting
  5. GooBazooka
    Post

    Partially Solved X-Axis Shifting Arbitrarily

    The belt seems to be tight. Enough to give a hum when plucked. I have it pulled together with zip ties at the moment. And there are no wires in...
    Post by: GooBazooka, Aug 30, 2016 in forum: Troubleshooting
  6. GooBazooka
    Thread

    Partially Solved X-Axis Shifting Arbitrarily

    X-axis seems to shift arbitrarily during prints. Example picture attached. The shift seems to be always to the right at different times in a...
    Thread by: GooBazooka, Aug 30, 2016, 17 replies, in forum: Troubleshooting