1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Can I buy a end stop connector locally?

Discussion in 'Troubleshooting' started by John in MS, Apr 14, 2018.

  1. John in MS

    John in MS Active Member

    Joined:
    Oct 26, 2015
    Messages:
    188
    Likes Received:
    29
    This snapped on me. Can i buy it locally? My choices are Walmart, Best Buy and Lowes?

    Thanks
     
    #1 John in MS, Apr 14, 2018
  2. John in MS

    John in MS Active Member

    Joined:
    Oct 26, 2015
    Messages:
    188
    Likes Received:
    29
     
    #2 John in MS, Apr 14, 2018
  3. John in MS

    John in MS Active Member

    Joined:
    Oct 26, 2015
    Messages:
    188
    Likes Received:
    29
    [​IMG]
     
    #3 John in MS, Apr 14, 2018
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Yes, those are crimp terminals -- Lowes will have them. Take that one with you so you can match the size (close is good enough -- a little bigger won't matter).
    If you don't have a crimp tool, get one of those too :)
     
    #4 mark tomlinson, Apr 14, 2018
  5. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    If you mean the switch it attached to is broken -- good luck. Not aware of any of those choices having those sort of switches.
    Make sure you get it back on the correct terminal on the switch :)
     
    #5 mark tomlinson, Apr 14, 2018
  6. BrooklynBay

    BrooklynBay Active Member

    Joined:
    Apr 7, 2018
    Messages:
    455
    Likes Received:
    50
    Any autp parts store should have the crimp connectors. I think that The Micro Center might have the switch as well as the crimp connectors. You could solder the broken crimp connector to the wire if you don't have a spare crimp connector.
     
    #6 BrooklynBay, Apr 14, 2018
  7. John in MS

    John in MS Active Member

    Joined:
    Oct 26, 2015
    Messages:
    188
    Likes Received:
    29
    Got new ones at Autozone. 5 hours into a 9 hour print and running fine
     
    #7 John in MS, Apr 14, 2018
  8. BrooklynBay

    BrooklynBay Active Member

    Joined:
    Apr 7, 2018
    Messages:
    455
    Likes Received:
    50
    Thanks for the update. Let us know if you need help with anything else.
     
    #8 BrooklynBay, Apr 14, 2018

Share This Page