1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unanswered PETG and PET+

Discussion in 'Troubleshooting' started by DonFG, Apr 22, 2016.

  1. DonFG

    DonFG New Member

    Joined:
    Mar 25, 2016
    Messages:
    4
    Likes Received:
    1
    Hello all, loving the ROBO+ but I am having an issue printing PET+

    I know the PETG is 230~250°c and PET+ 250~270C

    I set my nozzle to 250C and my bed to 70C, I have it set to print a raft (this is for a paper coffee cup wrap) it completes 2 layers which look great.

    Then it throws a temperature error and stops and everything shuts down. Says to correct temp and continue.

    Using only the fans that the system came with. So, is there not enough amps to keeps the temps stable or is there a temp limit that is shutting the system down? I really don't want to stop using these filaments, I like the results I have gotten in the past with a different printer.
     
    #1 DonFG, Apr 22, 2016
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    Paste the error in here.
    That is either a flakey thermistor or you are exceeding a limit* -- without the error we can't tell.




    *not likely at 70c for the bed
     
    #2 mark tomlinson, Apr 22, 2016
  3. DonFG

    DonFG New Member

    Joined:
    Mar 25, 2016
    Messages:
    4
    Likes Received:
    1
    Ok, I'll rerun it again tonight and copy the error message and post it.
     
    #3 DonFG, Apr 22, 2016

Share This Page