1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
  1. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    im super excited for auto-leveling. hopefully i can get to that point soon
    Post by: iandroo888, Apr 21, 2020 in forum: Troubleshooting
  2. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    https://smile.amazon.com/MXRS-Hinge-Momentary-Button-Switch/dp/B083C113YL/?th=1 would these work? the ones without the piece of metal ? feel like...
    Post by: iandroo888, Apr 21, 2020 in forum: Troubleshooting
  3. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    i saw something about those bearings. unsure which switches to get because i really want to replace those with some better ones.
    Post by: iandroo888, Apr 21, 2020 in forum: Troubleshooting
  4. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    is there some stuff i should look into ordering in the near future besides the things i "print" after i get it printing nicely? i noticed heater...
    Post by: iandroo888, Apr 21, 2020 in forum: Troubleshooting
  5. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    i wanted to look into getting Simplify3D but i can't justify the cost yet without having a well functioning/working printer
    Post by: iandroo888, Apr 21, 2020 in forum: Troubleshooting
  6. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    is there a preferred slicer you like to use? i think there was 3 to pick from. I dont remember which one i picked. i also noticed the fan wasn't...
    Post by: iandroo888, Apr 21, 2020 in forum: Troubleshooting
  7. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    i tried leveling it out as best as i can and attempted to print one of those z-axis braces from thingiverse for this printer. I had sprayed a thin...
    Post by: iandroo888, Apr 21, 2020 in forum: Troubleshooting
  8. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    tried using springs i found in pens but they seemed too weak. im using some washers to maybe help level weirdly after using a straight edge to...
    Post by: iandroo888, Apr 20, 2020 in forum: Troubleshooting
  9. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    hmmm time to find some springs
    Post by: iandroo888, Apr 20, 2020 in forum: Troubleshooting
  10. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    now only if i can print correctly [IMG] i stopped it by 3 rings as it didnt look like the picture in mattercontrol. noticed its super thin on...
    Post by: iandroo888, Apr 20, 2020 in forum: Troubleshooting
  11. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    ok i did the paper thing, now what do i do
    Post by: iandroo888, Apr 20, 2020 in forum: Troubleshooting
  12. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    my start g code is as follows G28 ; G1 Z5 F5000 ; M565 Z-0.90 ; yeah ive been trying to mess with the switch to see where is a good position. I...
    Post by: iandroo888, Apr 20, 2020 in forum: Troubleshooting
  13. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    it almost seems like the bed is a little saggy in the middle also, is there any way to keep the Z-axis nuts from coming out? i guess thats an...
    Post by: iandroo888, Apr 19, 2020 in forum: Troubleshooting
  14. iandroo888
    Post

    Unanswered Trying to calibrate printer and print correctly

    ok thats definitely a start ! what upgrades can I do and where do i get it (if its like proprietary parts...) i think my biggest issue is to get...
    Post by: iandroo888, Apr 19, 2020 in forum: Troubleshooting
  15. iandroo888
    Thread

    Unanswered Trying to calibrate printer and print correctly

    My cousin had given me the Robo 3D R1 (unsure if its + or not) a few years ago and i've been trying to figure it out here and there. Bed is an...
    Thread by: iandroo888, Apr 19, 2020, 37 replies, in forum: Troubleshooting
Showing results 1 to 15 of 15
Search Again