1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Finishing and post processing Your 3D prints- Make Magazine

Discussion in 'Troubleshooting' started by James, Apr 30, 2013.

Thread Status:
Not open for further replies.
  1. James

    James Member

    Joined:
    Feb 21, 2013
    Messages:
    48
    Likes Received:
    12
    Hey All
    Just wanted to let you know about this article I found in the latest issue of Make magazine issue 34.
    It covers several techniques to post process your prints. Along with a list of tools and materials that the writer uses to do friction welding, rivet, sand ,paint, gluing...

    Might be good for some of the new to 3d printing people out there .

    James S
     
    #1 James, Apr 30, 2013
  2. Kevyn Watkins

    Kevyn Watkins New Member

    Joined:
    Feb 23, 2013
    Messages:
    45
    Likes Received:
    18
    Link?
     
    #2 Kevyn Watkins, May 4, 2013
  3. James

    James Member

    Joined:
    Feb 21, 2013
    Messages:
    48
    Likes Received:
    12
    Sorry don't have a link.... try make.com or makezine...
     
    #3 James, May 4, 2013
  4. Thamer Albahiti

    Thamer Albahiti Active Member

    Joined:
    Feb 20, 2013
    Messages:
    195
    Likes Received:
    36
    exact article name would also help
    thanx
     
    #4 Thamer Albahiti, May 17, 2013
  5. tesseract

    tesseract Moderator
    Staff Member

    Joined:
    Feb 20, 2013
    Messages:
    1,924
    Likes Received:
    533
    Unless you subscribe to Make You can't get to the article so You will have to go to find a hardcopy
     
    #5 tesseract, May 18, 2013
  6. Printed Solid

    Printed Solid Volunteer Admin
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    1,605
    Likes Received:
    1,003
    I tried out the friction welding technique today. Very cool. I'd highly recommend buying the issue for that article alone, but there is some other fun stuff in there as well.
     
    #6 Printed Solid, May 31, 2013
Thread Status:
Not open for further replies.

Share This Page