1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

first print

Discussion in 'Troubleshooting' started by Enrico, Apr 26, 2014.

Thread Status:
Not open for further replies.
  1. Enrico

    Enrico New Member

    Joined:
    Feb 21, 2013
    Messages:
    16
    Likes Received:
    2
    these are the first prints finally after a bit of problems had to change the card bull arrived broken .. now always okay .. except to fix endstop z that will put a mechanical one optical .. not good .. and then I lowered the rate of home always z-axis at 10 * 60 was excessive ... now with 2 * 60 always perfect and attach some photos


    WP_20140426_10_11_41_Pro.jpg WP_20140426_10_11_56_Pro.jpg WP_20140426_10_12_06_Pro.jpg WP_20140426_10_12_42_Pro.jpg WP_20140426_10_13_07_Pro.jpg WP_20140426_10_19_43_Pro.jpg WP_20140426_10_13_21_Pro.jpg WP_20140426_10_09_02_Pro.jpg WP_20140426_10_09_21_Pro.jpg WP_20140426_10_09_35_Pro.jpg
     
    #1 Enrico, Apr 26, 2014
    2 people like this.
  2. 1d1

    1d1 Active Member

    Joined:
    Feb 21, 2013
    Messages:
    418
    Likes Received:
    216
    Great prints, Enrico!
     
    #2 1d1, Apr 26, 2014
Thread Status:
Not open for further replies.

Share This Page