1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

hobbed bolt bad

Discussion in 'Technical Support' started by tonycstech, Jan 24, 2014.

  1. tonycstech

    tonycstech Active Member

    Joined:
    Dec 16, 2013
    Messages:
    571
    Likes Received:
    190
    my hobbed bolt is not cut even.
    if i rotate it by hand i can clearly see its bad.
    i can feel it same when i manually extrude by rotating gear. every 360deg turn it will go loose.
    i would get it tight at its looses point but then it would get really tight.

    i get filament grinding because of that.
    can u guys sell me another one thats cut even ?
    i cant find any online, they all seem to be too long. in fact i already bought one silver, it has finer threads (not good) and is too long.


    thanks
     
  2. tonycstech

    tonycstech Active Member

    Joined:
    Dec 16, 2013
    Messages:
    571
    Likes Received:
    190
    Ah never mind. Found another one for $10. Will wait and see if its just as bad as the others.
     

Share This Page