1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Answered The connector going to the heat bed is stripped

Discussion in 'Troubleshooting' started by John in MS, Feb 18, 2018.

  1. John in MS

    John in MS Active Member

    Joined:
    Oct 26, 2015
    Messages:
    188
    Likes Received:
    29
    I am about to buy an Audrinio board for my R1.
    The bed isn't heating. Part of that is the connector that the lead from the bed goes into is stripped. Picture below where that connector goes in

    [​IMG]
    Well that connector doesn't seem to come with the Audrinio they sell. Maybe they come with the bed itself? The bed does heat fine.

    Any idea how I can buy that connector without buying the bed? Might save me from buying the Audrinio

    [​IMG][/url][/IMG]
     
    #1 John in MS, Feb 18, 2018
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    #2 mark tomlinson, Feb 18, 2018
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Top board is the RAMPS, bottom one is the Arduino. Connectors for the RAMPS would come with it, not the Arduino.
    The R1 and beta used a standard RAMPS 1.4 (about $14 all over Amazon) the R1+ uses a custom one. You can convert it back to a standard one, we have a thread on that too :)
     
    #3 mark tomlinson, Feb 18, 2018
  4. John in MS

    John in MS Active Member

    Joined:
    Oct 26, 2015
    Messages:
    188
    Likes Received:
    29
    The stock r1 plus ramps has two connectors that the one as that you showed me. Would that work? I have an Amazon ramps minus one stepper driver, so I would need to get another
     
    #4 John in MS, Feb 18, 2018
  5. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    #5 mark tomlinson, Feb 18, 2018
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    #6 mark tomlinson, Feb 18, 2018
    Geof likes this.
  7. John in MS

    John in MS Active Member

    Joined:
    Oct 26, 2015
    Messages:
    188
    Likes Received:
    29
    Thanks
     
    #7 John in MS, Feb 18, 2018

Share This Page