1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Robo beta doesnot connect

Discussion in 'Troubleshooting' started by jig, Sep 18, 2016.

Thread Status:
Not open for further replies.
Page 2 of 2
  1. jig

    jig Member

    Joined:
    Jul 20, 2016
    Messages:
    85
    Likes Received:
    14
    wauw mark you bin a great help THANKS its working and now i'm connected but one problem last time you helped i hat to disable somethings in config.h now i got my lcd but its not on can you help me with this one as well?
     
    #21 jig, Sep 18, 2016
    mark tomlinson likes this.
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    Which LCD screen do you have?

    There are at least two main ones and the smaller one does not need any changes to CONFIGURATION.H the other one (the Full Graphic LCD) does need a couple of lines changed.

    Just want to be sure exactly which one you have.
     
    #22 mark tomlinson, Sep 18, 2016
  3. jig

    jig Member

    Joined:
    Jul 20, 2016
    Messages:
    85
    Likes Received:
    14
    its a RAMPS 1.4 LCD12864
     
    #23 jig, Sep 18, 2016
  4. jig

    jig Member

    Joined:
    Jul 20, 2016
    Messages:
    85
    Likes Received:
    14
    RAMPS 1.4 LCD12864 3D Printer REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
     
    #24 jig, Sep 18, 2016
  5. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    #25 mark tomlinson, Sep 18, 2016
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    The key part to that post is that you not only have to edit the configuration.h but you also have to add the u8glib library to the Arduino compiler so that it will compile

    You can download that library here:

    https://bintray.com/olikraus/u8glib/Arduino

    You have to extract the library to the Arduino compiler libraries directory. then the Marlin code will recompile correctly after you edit the configuration.h
     
    #26 mark tomlinson, Sep 18, 2016
  7. jig

    jig Member

    Joined:
    Jul 20, 2016
    Messages:
    85
    Likes Received:
    14
    ok it works thanks now no movement on the axys, pffff its a mess
     
    #27 jig, Sep 18, 2016
  8. jig

    jig Member

    Joined:
    Jul 20, 2016
    Messages:
    85
    Likes Received:
    14
    the bed heats and extruder allso but no movement att all ,not from the bed or the axxes
     
    #28 jig, Sep 18, 2016
  9. jig

    jig Member

    Joined:
    Jul 20, 2016
    Messages:
    85
    Likes Received:
    14
    ok thanks you all im going back tommorow whit new problems? ok see you later thanks again
     
    #29 jig, Sep 18, 2016
  10. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    Sounds good open a new thread for the new problems. We can get it sorted out.
     
    #30 mark tomlinson, Sep 18, 2016
Page 2 of 2
Thread Status:
Not open for further replies.

Share This Page