1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved Poor infill

Discussion in 'Troubleshooting' started by Monder, Nov 29, 2016.

  1. Monder

    Monder New Member

    Joined:
    Jun 8, 2014
    Messages:
    23
    Likes Received:
    2
    Hi everyone,
    I'm trying new nozzle 0.8 but I got poor infill I tried to change the settings many times but still got the same result.
    Nozzle d 0.8
    First layer h 0.2- 0.3- 0.4 -
    Layer h same
    Top solid layers 5
    Bottom solid layers 3

    Thanks in advance ;)
     
    #1 Monder, Nov 29, 2016
  2. Monder

    Monder New Member

    Joined:
    Jun 8, 2014
    Messages:
    23
    Likes Received:
    2
    That's how it looks like
     

    Attached Files:

    #2 Monder, Nov 29, 2016
  3. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    looks like the infill is breaking apart, try increasing temp or reducing sped. with a .8 nozzle I print no faster than 40 mm/s
     
    #3 Geof, Nov 29, 2016
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    I agree, unless you have a volcano adapter.
     
    #4 mark tomlinson, Nov 29, 2016
  5. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    volcano .... :D lol
     
    #5 Geof, Nov 29, 2016
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Hey, laugh not.
    That is the entire point of the volcano -- to let you print large nozzles without slowing down.
    You totally know that ;)
     
    #6 mark tomlinson, Nov 29, 2016
  7. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    No volcanos in the house !
     
    #7 Geof, Nov 29, 2016
    mark tomlinson likes this.
  8. Monder

    Monder New Member

    Joined:
    Jun 8, 2014
    Messages:
    23
    Likes Received:
    2
    Actually it is 40% speed, the walls are good but the infill is poor it's like there is not enough filament go through the nozzle when it comes to the interior parts
    Unfortunately I don't have volcanoe
     
    #8 Monder, Nov 29, 2016
  9. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Print speed is not the same (not necessarily) as infill speed (this is a slicer specific setting).
    I would suggest making sure it is slower.
    Alternately you can try changing the infill pattern since different patterns lay down different amounts of plastic.
     
    #9 mark tomlinson, Nov 29, 2016
    Geof likes this.

Share This Page