1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Bed out of alignment?

Discussion in 'Troubleshooting' started by David Head, Sep 21, 2015.

  1. David Head

    David Head New Member

    Joined:
    Jul 17, 2015
    Messages:
    6
    Likes Received:
    1
    I have noticed that when doing the bed auto-level and checking how the extruder travels on the Y-axis it looks my bed is about 30mm out of alignment. Have attached 2 photos where the probe goes during the auto-level.
    Shouldn't the probe area me closer to the heavy white lines on the bed?
    DSC01015.JPG DSC01016.JPG

    Thanks,
    Dave
     
    #1 David Head, Sep 21, 2015
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,917
    Likes Received:
    7,338
    The printed lines on the bed are meaningless. Absolutely, meaningless.
    I suppose in a perfect world they would line up with the print area (they don't).
     
    #2 mark tomlinson, Sep 21, 2015
  3. David Head

    David Head New Member

    Joined:
    Jul 17, 2015
    Messages:
    6
    Likes Received:
    1
    OK, so no problem. Thanks....
     
    #3 David Head, Sep 21, 2015
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,917
    Likes Received:
    7,338
    It can be confusing. Not an unusual question :)
     
    #4 mark tomlinson, Sep 21, 2015

Share This Page