1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Full Graphic Smart LCD Controller - Add more options to display

Discussion in 'Mods and Upgrades' started by rbrock, Sep 19, 2014.

  1. rbrock

    rbrock Member

    Joined:
    Jul 14, 2014
    Messages:
    50
    Likes Received:
    17
    I would like to add a few options to the display.

    Would like to add a Home option for the print head, would also like control over x/y/z/e from the display, but I don't see them.

    I have it working and i'm able to print from it, but there isn't many options directly from the display (unless i'm missing something).

    Can you point me in the right direction.

    Thanks
     
    #1 rbrock, Sep 19, 2014
  2. Ziggy

    Ziggy Moderator
    Staff Member

    Joined:
    Feb 20, 2013
    Messages:
    707
    Likes Received:
    530
    Depends what you actually want to do

    There is an "AutoHome" from the main>prepare menu which homes x and y (and z depending on if you have the auto level)

    There are x,y,z moves (and extruder moves for certain move ranges) under main>prepare>move axis (need to scroll down the prepare options to see this)

    You can also "Baby Step" X, Y and Z during a print. But you have to set this option in the firmware.

    Also don't forget you can create "print files" with gcode sequences on the SD card and run them from the LCD menu.
     
    #2 Ziggy, Sep 19, 2014
    Last edited by a moderator: Sep 19, 2014
    AJinFLA likes this.

Share This Page