1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Getting CURA 4.0 to work with Robo R1+

Discussion in 'General Questions' started by Jose Cuevas, May 13, 2019.

  1. Jose Cuevas

    Jose Cuevas New Member

    Joined:
    May 10, 2019
    Messages:
    8
    Likes Received:
    4
    I manage to get the latest MatterControl (2.19) to work with my R1+.

    In the other hand I started to play with Cura 4.0 using the old R1 profile as base.

    The prints are messed by a Z gap, the extender is just too far from the bed.

    Anybody has a profile for CURA working?
     
    #1 Jose Cuevas, May 13, 2019
  2. Jose Cuevas

    Jose Cuevas New Member

    Joined:
    May 10, 2019
    Messages:
    8
    Likes Received:
    4
    UPDATE: I also played with the profiles found here for CURA 3.0.

    (since i cant post links, yet) in Robbo#D github there is the Slicing-Profiles for Cura 3.0


    So far I cant get extrusion for the skirt and that messes the print, but is printing better, will post my profile (WIP) later.
     
    #2 Jose Cuevas, May 13, 2019
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    I think the software wants 5 posts before allowing links/uploads/etc, but that is a guess :) It is something close to that.
     
    #3 mark tomlinson, May 14, 2019
    Jose Cuevas likes this.

Share This Page