I have a question matter control 1.1 options

hello! i'm south korea 25 years old Jung-Ho Kim
i'm well can't english sorry!!
i have a question ROBO 3D software mattercontrol
how set up mattercontrol options, make high qulity product?

plz answer!

 

Robo3d settings

Using Matter Control
Layer height 0.2046 or 0.246
First layer 0.3
Parameters 6
Top layer 5
Bottom 5
Generate extra parameters when needed
Start at non overhang
Thin walls
External parameters first

Infill 0.3
Infill every 1
Only infill when needed
Fill pattern Rectilinear
Top/Bot fill Rectilinear
Infill every 1 layer
Only infill when needed
Solid infill every 0 layers
Starting angle 45
Solid infill threshold 70

Speed
Everything at 50 except
Outside perimeter 70%
Gap fill 45
Min print speed 30
Travel 125
First layer speed 50%

Skirt and Brim
Loops 2
Distance 6
Skirt height 2
Non extrusion length 1
Brim 0

Support
Overhang 89
Enforce support 0
Raft 2 layers

Options
Pattern Rectilinear
Pattern spacing 2.5
Starting angle 0
Interface layers 3
Interface spacing 0
Z gap 1

Output options
Wipe 0
Adv first layer 150%

Flow
Bridge flow 1

Other
Threads 2
Res 0
Extrusion axis E
Optimize overhangs

Filament
Diameter 1.75
Ext multi 1
Ext first layer 190
Ext temp 190
Bed first layer 55
Bed temp 0

Printer
Bed size 228.6 x 254
Print centre 114.3 x 127
Build height 203.2
Z offset 0
Bed shape rectangular
Firmware reprap

Extruder
Nozzle 0.4
Ext offset 0

Retract
Length 1
Change tool 10
Z lift 0.12
Speed 35
Extra length 0
Min travel 2
Retract on layer change
Retraction when disabled 10
Extra length 0

Everything I posted should be entered. If I did not post it, leave it unchecked or at default.



Sent from my iPhone using Tapatalk in Canada

 

wow! peter! very very thank you!!!! i'm very happy

 

Odd, I only see 'wipe (shield distance) 0' in output options when picking MatterSlice for the slice engine (MC 1.1.6); in which case I don't get the options for rectilinear and some of the other suggestions you mentioned.