i have three questions

so I got PLA only version of robo3d and i was wondering can I use the auto bed leveling ?

I have this youtu.be/y5MV-9_FKvI?t=6m45s in the other derection and I dont know how to rotate it. This is how it is now http://imgur.com/m6jKjyR

how do i level the bed?

im a noob.

 

Hey Palmi,

You can use auto bed leveling but you'd have to run the code with the nozzles cool so as to not scorch your acrylic bed.

There's 2 screws holding the switch in. You'll need to remove those screws and turn the switch around. Might involve taking off the case lid to access them.

The best way to level the stock bed on drawer slides is Tessarects bed leveling mod

Everyone starts a newb

 

ok but what code?

 

G29 but it won't do you any good without the auto level switches installed.

 

ok, but i have no idea of how i level the bed

 

What do you mean. You don't know how to level the Z carriage against the bed? Or the bed levelness itself?

 

ok i got it , here is a picture of my first print http://imgur.com/IZuLrzz

 

Looks like a good start. Is that PLA? You might try enabling cooling settings and retraction.

 

this is PLA, and where do i enabling it?

 

https://www.matterhackers.com/articles/mattercontrol-slice-settings-explained#cooling

First hit for Matter Control Cooling