1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved LCD Question

Discussion in 'Troubleshooting' started by mrshell, Aug 18, 2020.

Thread Status:
Not open for further replies.
  1. mrshell

    mrshell New Member

    Joined:
    Feb 1, 2020
    Messages:
    2
    Likes Received:
    0
    I use the STON display module. But I cannot communicate with the module using UART. I tried different serial port applications like SSCOM, RealTERM, SerialPlot but nothing changed. When I sent this command: 0xA5 0x5A 0x04 0x80 0x03 0x00 0x01 to display using SSCOM with PC, there is no response from display. In my project, I have a 1.JPG file. I don't know what went wrong.
     
    #1 mrshell, Aug 18, 2020
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Not sure what (if anything) this has to do with a Robo printer.
    You might want to try in an embedded programming forum.
     
    #2 mark tomlinson, Aug 19, 2020
Thread Status:
Not open for further replies.

Share This Page