1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved matter control layer view

Discussion in 'General Questions' started by joea, Aug 6, 2021.

  1. joea

    joea Active Member

    Joined:
    Nov 12, 2019
    Messages:
    351
    Likes Received:
    51
    After a long layoff, doing some printing. I swear I recall, in "layer view" I could see "real time" layers being printed. Now I do not, and cannot figure how to enable it.
     
    #1 joea, Aug 6, 2021
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    #2 mark tomlinson, Aug 7, 2021
  3. joea

    joea Active Member

    Joined:
    Nov 12, 2019
    Messages:
    351
    Likes Received:
    51
    For some reason mine does not show "sync to print". It used to be there. MC version is 1.5.0.
     
    #3 joea, Aug 7, 2021
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    The current build of MatterControl from the link I posted above is 2.21.6.11058

    You might wan to try that. I can't give you specific advice on that slicer, sorry :) just general troubleshooting ideas. Someone else on here may have more experience with it...
     
    #4 mark tomlinson, Aug 8, 2021

Share This Page